Importing Medical Devices from Japan: ÜTS Registration and Document Requirements
Importing medical devices from Japan is a common question for product groups such as imaging, endoscopy and laboratory devices. A Japanese manufacturer's PMDA review is not used for ÜTS registration in Türkiye; the required document set is built on the CE marking. This page explains the import and ÜTS steps for Japanese-origin devices based on the text of the legislation.
Are PMDA and MHLW approvals valid in Türkiye?
In Japan, approval review of medical devices is carried out by the PMDA (Pharmaceuticals and Medical Devices Agency), and the regulating ministry is the MHLW (Japan's Ministry of Health, Labour and Welfare). On the PMDA's English pages, the agency's three duties are listed as approval review, post-market safety measures and relief for health damage; the underlying law is the Act on Securing Quality, Efficacy and Safety of Products Including Pharmaceuticals and Medical Devices (PMD Act), and the quality management system requirements are in MHLW Ministerial Ordinance No. 169. These approvals are for the Japanese market. To be placed on the market in Türkiye, the device must bear the CE marking and comply with the Regulation.
Since Japanese manufacturers commonly sell to the EU market, CE documents are mostly ready. What the importer needs to do is collect the Japanese company's EU declaration of conformity, notified body certificate and EU authorized representative authorization document with the authentication and translation that ÜTS requires.
The condition that PMDA approval does not meet is written in the Regulation as follows:
“Except for custom-made or investigational devices, devices that are considered to conform to the requirements of this Regulation bear the CE marking of conformity as shown in Annex V.”
Source: Medical Device Regulation (OG 31499, 2.6.2021), Article 20/1.
Article 13/2-a of the Regulation places four verifications on the importer: the CE marking and declaration of conformity, identification of the manufacturer and the authorized representative, proper labelling and instructions for use, and where applicable the UDI.
In Japanese files, the second verification, the authorized representative, is the document most often missing; PMDA approval does not replace the CE marking, and a local representative in Japan does not replace the authorized representative required by the Regulation. For the difference between the declaration and the certificate, see our article on the differences between the EC certificate and the declaration of conformity.EC sertifikası ve uygunluk beyanı farkları yazısında.
The Japanese manufacturer's authorized representative in the EU or Türkiye
Japan is not an EU member; a device from a Japanese manufacturer can be placed on the market in Türkiye only if an authorized representative established in Türkiye or the EU has been appointed. A representative appointed by the Japanese manufacturer for the EU, even if it is its own subsidiary in the EU, is also valid for Türkiye under the Customs Union. The EU Authorized Representative field in ÜTS document registration is mandatory for a Japanese manufacturer.
“If the manufacturer is not established in Türkiye or in EU member states, the device may be placed on the market only if the manufacturer appoints an authorized representative.”
Source: Medical Device Regulation (OG 31499, 2.6.2021), Article 11, paragraph 1.
“Authorized representative: A natural or legal person established in Türkiye or in EU member states who is appointed in writing by the manufacturer, where the manufacturer is established outside Türkiye or the EU member states, to act on its behalf in carrying out certain obligations under this Regulation”
Source: Medical Device Regulation, Article 3/1-lll.
“manufacturers established outside the territory of the EU or Turkey only need to designate one authorised representative, either in the EU or in Turkey, in order to place medical devices on the market in the EU or in Turkey.”
Source: European Commission Notice to Stakeholders (March 2022), EU-Turkey Customs Union Agreement in the Field of Medical Devices, Section I.2.
In English: a manufacturer outside the EU or Türkiye appoints a single authorized representative for the two markets; the Japanese manufacturer's EU subsidiary can take on this role. Medex provides the same service as an EU Authorised Representative in EUDAMED under number TR-AR-000057550; for Japanese manufacturers, see our pages on EU authorized representation for Japanese manufacturers and authorized representation for importers.EU Authorised Representative olarak verir; Japon üreticiler için Japonya üreticileri için AB yetkili temsilcilik, ithalatçı için yetkili temsilcilik hizmeti sayfalarına bakın.
The Japanese manufacturer's authorization document is uploaded to ÜTS as the original with its sworn translation; the mandatory nature of the field is in Guide Article 12/7-a, and the exemption from authentication is written in the following subparagraph:
“The original of the document and its Turkish translation by a sworn translator are uploaded together in the ‘Authorization Document’ field. Neither an apostille nor embassy/consulate legalization is required for the original of the authorization document.”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 12/7-c.
Apostille and translation for Japanese documents
According to the HCCH status table, Japan ratified the Hague Apostille Convention on 28.5.1970, and the Convention entered into force on 27.7.1970. For the Japanese manufacturer's declaration of conformity, an apostille obtained in Japan is accepted in ÜTS. Even if the documents are drawn up in English, a sworn Turkish translation is required in every case. If the notified body certificate is e-signed and can be verified, no separate apostille is sought for the certificate.
The Guide's rule for the Japanese apostille and the condition of uploading the original:
“a) Apostille-certified document or, 1) If the manufacturer is in an EU member state, the apostille certification obtained from the competent authority of the country where the manufacturer is established; if the manufacturer is established in a country that is not an EU member, the apostille certification obtained from the competent authority of the country where the manufacturer or the EU Authorized Representative appointed by the manufacturer is established is accepted.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12, paragraph 1, subparagraph (a).
“The original of the apostille-certified document must be uploaded to ÜTS; there is no need to upload a copy of this document issued by a Turkish notary or a notary of another country.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12/1-a-2.
The translator's stamp and declaration requirement for the sworn translation of an English original:
“The relevant document bears the name and surname, stamp/signature/seal of the sworn translator who made the translation, and the translator's declaration that the translation was made in conformity with the original document.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12/2-b.
For consular legalization (Guide Article 12/1-b), e-Apostille (12/1-c), e-signed documents (12/1-ç) and the Turkish document field (12/2), see our apostille guide, e-Apostille verification and sworn translation and document preparation pages.apostil rehberi, e-Apostil sorgulama ve yeminli tercüme ve belge hazırlığı sayfalarına bakın.
TAREKS and ÜTS import notification for Japanese consignments
An A.TR certificate does not apply to consignments from Japan; TAREKS risk analysis is applied to products on the Annex-1 list of the Communiqué, for example magnetic resonance imaging and computed tomography devices. After customs, the import notification is made in ÜTS.
“For products directed to physical inspection, the documents specified in items three, four and five of Annex-2 are uploaded to TAREKS electronically within twenty working days including the application day, and additional time is given by the system if requested in TAREKS.”
Source: Communiqué on Import Control of Medical Devices (ÜGD: 2026/16), Article 9/1.
“EU Declaration of Conformity (together with a certified copy of its Turkish translation where drawn up in other languages)”
Source: Communiqué on Import Control of Medical Devices (ÜGD: 2026/16), Annex-2, item 3.
For Japanese devices such as MRI and CT, the post-customs ÜTS transaction is the import notification:
“An ‘import notification’ is made for products whose country of origin in the product registration is not ‘Türkiye’.”
Source: ÜTS Individual Movement Notifications Guide, Article 7, paragraph 1.
The notification can only be made for a product registered in ÜTS (Individual Movement Guide Article 7/4); an import notification cannot be entered before the imaging device's product registration is completed. The chain is described in our article on ÜTS individual movement notifications.ÜTS tekil hareket bildirimleri yazısında.
ÜTS steps for a device of Japanese origin
The ÜTS chain for a Japanese device: ÜTS company registration with the sales center authorization certificate and ÇKYS number (Guide Article 5/5), ÜTS document registration with the apostilled declaration, certificate and authorization document, ÜTS product registration with the Imported selection and GTİP, and an import notification for each consignment. The detailed explanation is in our article on ÜTS registration for medical device imports; the two field rules in the product registration:satış merkezi yetki belgesi ve ÇKYS numarasıyla (Kılavuz Madde 5/5) ÜTS firma kaydı, apostilli beyan, sertifika ve yetki belgesiyle ÜTS belge kaydı, İthal seçimi ve GTİP ile ÜTS ürün kaydı, her parti için ithalat bildirimi. Ayrıntılı anlatım tıbbi cihaz ithalatında ÜTS kaydı yazısında; ürün kaydındaki iki alan kuralı:
“If the manufacturer that issued the declaration of conformity to which the device is linked (the legal manufacturer) is not located in Türkiye (that is, a foreign manufacturer), this field is selected as ‘Imported’.”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 27, Imported/Manufactured information.
“The country where the device is physically manufactured is selected. More than one country can be selected in this field.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 27, Country of Origin field.
For a device that the Japanese manufacturer has made in a third country such as Thailand, see our page on contract manufacturing and country of origin for the Country of Origin field, and our page on the GTİP code in ÜTS registration for the GTİP.fason üretim ve menşe ülke, GTİP için ÜTS kaydında GTİP kodu yazısına bakın.
Summary table for Japan
TopicJapanCountry authorityPMDA (Pharmaceuticals and Medical Devices Agency) and MHLW (pmda.go.jp)Is PMDA approval used in ÜTS?No; the CE marking, declaration of conformity and certificate are requiredAuthorized representativeMandatory; a subsidiary in the EU can also be the representative, and a single representative is sufficient for both marketsApostilleIn force for Japan since 27.7.1970; no apostille is sought for an e-signed certificateDocument languageEnglish original + sworn Turkish translationCustomsNo A.TR; TAREKS risk analysis for Annex-1 products such as MRI and CT
For other countries: importing medical devices from Taiwan, importing medical devices from South Korea.Tayvan'dan tıbbi cihaz ithalatı, Güney Kore'den tıbbi cihaz ithalatı.
Medical Device ÜTS Registration Consultancy for Imports from Japan
We prepare the Japanese manufacturer's declaration of conformity, the notified body certificate for higher-class devices and the EU representative authorization document for ÜTS with apostille and sworn translation; we handle company and document and product registrations and consignment-based import notifications. Request a quote or reach us at +90 505 580 46 22 and info@medexmedikal.com.Fiyat teklifi alın veya +90 505 580 46 22 numarasından ve info@medexmedikal.com adresinden ulaşın.
Frequently Asked Questions
Can I use a Japanese manufacturer's PMDA approval certificate in ÜTS?
No. ÜTS document registration is made with the EU declaration of conformity and the notified body certificate. PMDA or MHLW approval is not a document type in ÜTS and does not meet the CE marking requirement in Article 13/2-a of the Regulation.
Can the German subsidiary of a Japanese manufacturer be the authorized representative?
Yes. Article 3/1-lll of the Regulation defines the authorized representative as a natural or legal person established in Türkiye or in EU member states who is appointed in writing by the manufacturer. It is sufficient that the subsidiary is established in the EU and that an authorization document is issued.
Does a document with a Japanese apostille also need notarization?
No. Article 12/1-a-2 of the Guide requires the original of the apostille-certified document to be uploaded and explicitly states that there is no need to upload a copy issued by a Turkish or foreign notary.
Is TAREKS mandatory when importing an MRI or CT device from Japan?
The Annex-1 list of the Communiqué includes 9018.13.00.00.00 magnetic resonance imaging devices and 9022.12.00.00.00 computed tomography devices (for medical use). For products under these GTİPs, a TAREKS application is made under Article 4/1.
What country of origin is entered if the Japanese manufacturer's device is made in Thailand?
According to Article 27 of the Guide, the country where the device is physically manufactured is selected in the Country of Origin field; if the legal manufacturer makes the device at its facility in another country, that country is entered. The Imported/Manufactured field is set to Imported because the legal manufacturer is outside Türkiye.
