ÜTS Service Items and Scope

Imported Medical Device UTS Registration File Management
You are importing medical devices from abroad and the file is stuck on the UTS side. Document registration does not open, the declaration you need does not appear on the device screen, or the application ended negatively and the reason is not fully clear.
How We Work, and What We Do Not Promise
What the services on this page have in common is this: we carry out the ÜTS side of the work in your place. From company registration to document and product registration, from authorised representation to the MDR transition period extension application, from the sales centre authorisation certificate to technical file preparation, all of it is part of the same chain. You can find the general framework of the service on our ÜTS consultancy page.
We start work as follows. First we ask for your product list and the documents from the manufacturer. We determine which regulation each product falls under, which class it belongs to and which type of document is required. If a document is missing or is in a form that ÜTS will not accept, we tell you in writing before the application is opened. We move on to registration only after this assessment is complete, because applications are usually returned not because of pressing the wrong key but because of starting with the wrong decision.
At the registration stage, you grant us the Tıbbi Cihaz Kayıt Elemanı (Medical Device Registration Officer) authorisation from your own company page in ÜTS. With this authorisation we create the records, check their compliance with the business rules and approve the applications. Your e-signature is not transferred to us; the signing stage remains with the company's authorised signatory. You grant the authorisation and you can withdraw it at any time; when the work ends, no access remains with us.
Let us also state what we do not promise. We do not say how long an application will take to conclude; the evaluation time rests with the Agency, and the legislation contains no concept of a completion time for the process. We do not guarantee approval; we are not the ones who decide. We do not take over the registration obligation; the Tıbbi Cihaz Yönetmeliği places this obligation on the economic operator and it cannot be transferred by contract. What we do is ensure that this obligation is fulfilled correctly and completely.
Registration has three stages and the order cannot be skipped
The system is built on three separate records: first the company, then the document, and last the product. This order is not a preference but a technical requirement; each stage produces the prerequisite of the next. A user whose company is not defined cannot see the document screens, and a company with no defined document cannot proceed to product registration. In practice, what wastes the most time is a first-stage error noticed at the third stage. A single wrongly selected field in the company record can come to light after hundreds of products have been entered into the system. For this reason we always start from the beginning: when we receive the product list, the first thing we do is not to enter the products but to check whether the company's definition in the system is correct.
In which role is your company in the system?
What determines your obligation is not what you do, but how your relationship with the product is characterised in the legislation. The same company can hold more than one role, and each role has separate consequences. A manufacturing company registers with its own documents. An importing company is also obliged to introduce the documents of the manufacturer abroad into the system; in other words, you take responsibility not only for your own record but also for the correct appearance of your supplier's documents in the system. A company that buys and sells the product makes its own registration and is responsible for movement notifications. The point companies most often overlook is this: a business you started as a distributor can move you, in the eyes of the legislation, to the position of manufacturer. If you place the product on the market under your own brand, or if you intervene in its packaging or instructions for use, the responsibility you have assumed is no longer that of a distributor. Noticing this at the registration stage is far cheaper than noticing it during an inspection. The sales centre authorisation certificate, on the other hand, is an entirely different process and must not be confused with ÜTS company registration. They are separate applications, separate documents and separate paths.
Where applications get stuck most often
Most rejection and revision decisions arise not from the content of the file but from how the application was structured. The ones we see most often are these.
Wrong document type selected from the start. This choice, made in the first step of document registration, determines everything that follows: which attachments will be requested, which path the application will take, which fields will be mandatory. When it is selected wrongly, the application does not proceed even if the rest of the file is flawless.
Classification skipped. The class of the device is not information you enter into the system but a decision you must make before entering it. If the class is wrong, the document type you can select will also be wrong, and the error appears two stages later.
Company type and document set do not match. The documents requested change depending on the type in which you defined your company in the system. Documents prepared without noticing this distinction fall short.
Translation not done in the proper form. Documents in a foreign language require a sworn translation; in which documents an additional certification is also sought varies by document type. Some companies think they have dealt with the translation while skipping the procedural requirement.
Product images not in the required format. Especially in bulk registration, a mismatch between the uploaded images and the records in the template is enough on its own to stop the application.
Document not valid at the time of application. If preparation drags on, a document that was valid when the process began may have lost its validity by the time the file is submitted.
When an application is rejected, the first step is not to reapply
The reflex of most companies is the same: when the decision arrives, to correct the file and send it again. However, the legislation defines a separate path that can be used before reapplying, and this path exists for cases where you believe the decision is wrong. The difference is important. When you correct the file and resubmit it, you accept the first decision; you restart the process from the beginning without using your right to object. If the decision is contrary to the legislation, however, the path to follow is a request for re-evaluation, and this path has its own procedure and its own time limit. For this reason, when a rejected file comes to us, the first thing we do is not to correct the file but to read the decision: what type of decision was made, whether the reasoning relates to procedure or substance, and whether the time limit granted for objection has run out. Every step taken without this assessment turns into a choice that cannot later be undone.
Do not enter hundreds of products one by one
For companies with many products in their catalogue, the system defines a separate path. Instead of entering each product one by one on screen, bulk upload is done through the prescribed template; label and packaging images are submitted together with this upload. The time this path saves is significant, but it has a condition: every row in the template must correctly match its corresponding image. An upload in which the matching is broken wastes more time than entering one by one, because the error appears not in a single product but across the whole batch. When we carry out the bulk registration, we cross-check the product list and the image set against each other before filling in the template.
The work does not end when the registration ends
ÜTS is not only a registration system but also a tracking system. After your products are entered into the system, their movements must be notified: individual notifications, receipt and supply transactions, inventory status. Companies that complete registration but neglect the notification obligation may face problems in inspections similar to those faced by companies that never registered. We can also take over this side, which involves a continuing obligation; we provide registration consultancy and process management separately or together.
Frequently asked questions
Can a product be sold without ÜTS registration?
No. A device that is not registered in the system cannot be placed on the market.
Is an electronic signature required for registration?
Yes. Once the application is prepared, it is submitted with the e-signature of the authorised signatory.
Can the consultant do everything on my behalf?
For the preparation and the part up to approval, yes; the authority to submit remains with you.
Who registers a manufacturer abroad?
The importing company or the appointed authorised representative.
What happens if my company information changes?
The record in the system must be updated; information that has not been updated causes problems in later applications.
Is the sales centre authorisation certificate the same as ÜTS company registration?
No, they are separate processes.




























