top of page

ÜTS Product Registration Consultancy

Your documents are registered in ÜTS, but the device side is not moving forward. You select the application type and the declaration list comes up empty

ÜTS Product Registration Consultancy

ÜTS Product Registration Consultancy: Preparing and Submitting the Device Application

Your documents are registered in ÜTS, but the device side is not moving forward. You select the application type and the declaration list comes up empty; or you think you have completed the registration but the product does not appear ready for application on the "List My Medical Devices" screen.

This page describes the part of device registration and the device application that is handed over to us. We set up the type, grouping and mandatory fields of the application, and we perform the "Confirm" step in the application. The e-signature stays with your authorized signatory, and responsibility for the accuracy of the data entered into the system remains with your company.

Below you will see, in order, which decisions we make, what we ask from you for each product, and what we do when a rejection arrives.

The first decision in a device application: the application type

A device application starts with selecting the right type, and this choice determines the rest of the screen. According to Article 40, paragraph 3 of the Guide, the list currently contains seven application types.

  • Optical Products Application
  • Active Implantable Medical Devices Application
  • Class 3 Products Application
  • Other Products Application
  • Custom-Made Medical Device Application
  • System/Procedure Pack Application
  • Products Under 2023/KK-1 and 2023/KK-2 Application

The types are not just different names; their flows are also different. Under Article 40, paragraph 5 of the Guide, in the applications for optical products, active implantable medical devices, Class 3 products, other products, and products under 2023/KK-1 and 2023/KK-2, the first step is declaration selection: from the list on the application summary screen, the declaration of conformity or EU declaration of conformity tied to the device is selected, and then the products are added. Under paragraph 6, custom-made medical device and system/procedure pack applications have no declaration selection step; they start directly with product selection.

When the wrong type is selected, the system gives no warning; it simply does not show what you are looking for. Under Article 40, paragraph 5, subparagraph (b) of the Guide, the declaration selection screen lists only declarations tied to devices in "Ready for Application" status. In practice the question is always the same: "the declaration is registered in the system but is not in the list". The answer is most often either in the type selection or in the status question under the next heading.

The grouping rule determines how many applications your portfolio is split into

How many products go into one application is not a free choice. Three rules work at the same time, and together they determine into how many pieces your portfolio is split.

Under Article 40, paragraph 7 of the Guide, in applications for devices under the old medical device regulations, applications are allowed only for devices tied to the same GMDN code. Under paragraph 8, in applications under the new medical device regulations, except for custom-made medical devices, applications can be made only for devices tied to the same Basic UDI-DI code.

The third rule is on the declaration side. Under Article 40, paragraph 5, subparagraph (c) of the Guide, since medical device applications can be formed only from devices tied to a single declaration, only one declaration can be selected from the list.

Quantity limits are added on top. Under paragraph 5, subparagraph (ğ) of the same article, application types that proceed with a declaration contain at most 500 device notifications; under paragraph 6, subparagraph (d), the limit is 5 for custom-made medical device and system/procedure pack applications.

We prepare the split plan before opening the applications. We group your portfolio by Basic UDI-DI or GMDN, confirm which declaration is tied to each group, and tell you in writing how many applications will be opened. A later change to this plan means that applications already opened must be withdrawn.

If it is not "Ready for Application", your product does not appear in the list

Filling in the registration screen is not the same as applying. Between the two there is a status question, and it is the most often skipped step.

Under Article 27, paragraph 11, subparagraph (a) of the Guide, the "Ready for application?" field on the registration screen is mandatory. If the notification will be updated later or is not ready to be sent to the Agency, "No" is selected; if the notification has taken its final form, "Yes" is selected. Under the same subparagraph, when "No" is selected the notification is saved in ÜTS as "Draft"; when "Yes" is selected it is saved as "Ready for Application" and is listed on the "List My Medical Devices" screen.

The difference between these two statuses ties directly to the previous heading. Since Article 40, paragraph 5, subparagraph (b) of the Guide limits the declaration list to declarations tied to devices in "Ready for Application" status, a notification left in draft does not appear at all on the application screen.

One of the first things we do in files we take over is to extract the list of notifications left in draft. Some of them were deliberately held back; some were forgotten, and the company believes the registration of that product is complete.

Mandatory fields: the real workload of the file

The workload of device registration comes not from the number of fields on the screen but from the dependencies between fields. Article 27 of the Guide regulates registration under the MDR under eleven headings: identifying information, import and manufacturing information, classification information, product documents, product images, characteristics, dimension information, storage and use condition information, CMR and endocrine-disrupting substance information, and application status.

These headings are linked to each other. Under Article 27, paragraph 5, subparagraph (a), sub-subparagraph 3 of the Guide, the class of the device must have been selected before document selection; and under subparagraph (c), sub-subparagraph 3 of the same paragraph, before selection is made from the "Select Basic UDI-DI" screen, the EU Declaration of Conformity and EU Certificate related to the device under the document business rule must have been selected. The path is one-way: first the class, then the document, then the Basic UDI-DI.

Identifying information

The first block of the registration screen consists of the fields that uniquely identify the device in the system. Under Article 27, paragraph 2 of the Guide, the UDI Issuing Entity, UDI-DI Number, Brand Name, Product Name and Trade Name, and Number of Products in the Contents fields are mandatory.

In the version and reference fields a pair of rules applies. Under sub-subparagraph 7 of subparagraphs (ğ) and (h) of the same paragraph, the Version/Model and Reference/Catalog Number fields are not both left blank, and "NONE" is not written in these fields; entering information in at least one of the two fields is mandatory.

The number of products in the contents is also not as simple as it looks. Subparagraph (i) of Article 27, paragraph 2 of the Guide separates three different cases with examples: if the smallest package contains 4 of the same device, 4 is entered in the field; in kits consisting of more than one component, 1 is entered, but if the package contains more than one kit, the number of kits is entered; for devices used as a pair, the number of pairs is entered, for example 1 is entered for a pair of gloves.

Automatically locked fields

Some fields are filled in by the system depending on the selection of another field and cannot be changed afterwards. Working the screen without knowing this behavior often ends with the record being opened again from the beginning.

Under Article 27, paragraph 7, subparagraph (h), sub-subparagraph 3 of the Guide, when the "Can it be implanted in the body?" field is selected as "Yes", ÜTS automatically selects the single-use and limited number of uses fields as "Yes", the limited number of uses value as "1", and the fields for subject to calibration and maintenance as "No", and no changes can be made to these fields. Article 25, paragraph 7 of the Guide defines the same behavior for the old regulations.

A similar lock exists on the single-use field. Under Article 27, paragraph 7, subparagraph (ı), sub-subparagraph 4, when the "Is it single-use?" field is selected as "Yes", the limited number of uses becomes "1", the calibration and maintenance fields are marked "No", and the related fields cannot be changed.

Fields not filled in by the company

Not every field you see on the screen is a field you must fill in. Two fields are generated by the system.

The first is the Turkish label. Under Article 27, paragraph 7, subparagraph (c) of the Guide, this field is created automatically by ÜTS after a device registration or update application is made, and companies do not upload a Turkish label separately. Sub-subparagraph 4 of the same subparagraph carries an important warning: the template created in this field does not replace the original label. Article 25, paragraph 7, subparagraph (c) of the Guide carries the same provision for the old regulations.

The second is the class field in a system/procedure pack record. Under Article 28, paragraph 6, subparagraph (a) of the Guide, this field is not filled in by the applicant company and does not appear on the SPP registration screen; the class of the highest-risk device under the MDR among the devices forming the pack is automatically selected by ÜTS as the class of the pack.

Five data items needed for each product

We fill in the screen, but the source of the data is you. For each product we ask for five items of data, and all of them correspond to a mandatory field on the registration screen.

  • Images of the label and the sales packaging: Under Article 27, paragraph 7, subparagraph (b) of the Guide, the "Original Label and Sales Packaging" field is mandatory. Under the same subparagraph, if all the information that must be on the original label is not on it, the inner and/or outer sales packaging must also be uploaded; the packaging at the level where the information is located is uploaded.
  • Shelf life, sterility and sterilization method: Under Article 27, paragraph 7, subparagraph (l) of the Guide, the shelf life field is mandatory and, when "Yes" is selected, the shelf life value is entered in days, months or years. Under subparagraph (r) of the same paragraph, the sterile packaging field is mandatory; when "Yes" is selected, making a selection in the sterilization method field in subparagraph (s) becomes mandatory. More than one method can be selected in this field, and selecting all the methods used in the packaging is mandatory.
  • Calibration and maintenance period: Under Article 27, paragraph 7, subparagraph (o), sub-subparagraph 4 of the Guide, if the calibration period of a device is not specifically determined by the manufacturer and is not stated in the Guide, the value 12 is entered in this field. Article 25, paragraph 7, subparagraph (n) of the Guide writes the same rule for the old regulations.
  • Content information: Under Article 27, paragraph 7, subparagraphs (d), (e), (f) and (g) of the Guide, the fields on whether the device contains latex, phthalate or DEHP, ionizing radiation and nanomaterial are all mandatory. These fields bind not only the registration screen but also the label; for example, under sub-subparagraph 3 of subparagraph (d), if the device contains latex, it is mandatory that this information is on the label and/or sales packaging and in the instructions for use.
  • Dimension and storage condition values: Under Article 27, paragraph 8 of the Guide, dimension information is added together with units of measurement, and more than one dimension of the same dimension type cannot be added. Under paragraph 9, the field on whether there is a storage and/or use condition is mandatory; when "Yes" is selected, adding the conditions to the system becomes mandatory.

We collect these five items through a template. Every cell left blank in the template means a field that will stay blank on the registration screen.

The barcode is entered exactly as in the document

The barcode is the strictest field of the registration and the one that causes the most disputes. The rule can be summed up in one sentence: whatever the barcode says in the document is what is entered.

Under Article 27, paragraph 2, subparagraph (b), sub-subparagraph 3 of the Guide, the barcode allocated in the standard the device holds must be entered into ÜTS exactly, without any change. The provision in the same place in Article 25 of the Guide says the same for the old regulations.

Sub-subparagraph 4 of the same subparagraph also writes the consequence: a device application made for a device record whose barcode is not entered into ÜTS as it appears in its technical documents, that is, documents such as the label, sales packaging, EU declaration of conformity and EU certificate, ends unfavorably.

The issuing entity is not a free choice either. Under Article 27, paragraph 2, subparagraph (a), sub-subparagraph 3 of the Guide, the UDI issuing entities registered in ÜTS under the MDR and authorized for medical devices, and their standards, are GS1, HIBCC, ICCBBA and IFA.

There is also a format compatibility check. Under sub-subparagraph 5 of the same subparagraph, the format of the UDI-DI number must be compatible with the barcode allocation rules determined by the entity that allocated it; the Guide gives as an example the compatibility between a barcode allocated under the HIBCC standard and the reference/catalog number.

Identifying in advance the changes that require a new UDI-DI

Some changes made to a product are not resolved by updating the existing record; they require a new barcode. Catching this distinction at the registration stage is much cheaper than catching it later.

Under Article 27, paragraph 2, subparagraph (b), sub-subparagraph 7 of the Guide, when there is a change that could lead to misidentification of the device and/or ambiguity in its traceability, a new UDI-DI number must be allocated to the resulting new device. The same sub-subparagraph lists the changes requiring a new number one by one.

  • A change in the device name or trade name
  • A change in the device version or model
  • A change related to whether it is single-use
  • A change related to whether it is packaged sterile
  • A change related to whether it must be sterilized before use
  • A change in the quantity of devices in the package or box
  • A change in critical warnings or contraindications: the Guide gives as examples changes related to latex, DEHP, or CMR and endocrine-disrupting substance content

There is also a situation most companies do not expect. Under Article 27, paragraph 2, subparagraph (g), sub-subparagraph 2 of the Guide, any change in the trade name resulting from translation into the languages of the EU countries in which the device is placed on the market leads to the affected device being placed on the market with a new UDI-DI. That is, even a name translation alone may require a new number.

Product images: one of the most common rejection reasons

The image field is the most underestimated section of the registration screen and the one that produces the most rejections. Article 25, paragraph 6, subparagraph (a) and Article 27, paragraph 6, subparagraph (a) of the Guide write the rules of this field in detail.

The basic rule is this: packaging alone is not enough. Under Article 25, paragraph 6, subparagraph (a), sub-subparagraph 5 of the Guide, not only the package or packaging of the device is uploaded as the product image; images clearly showing a photograph or technical drawing of the device must also be uploaded together with the package images. If there is an image of the device itself on the device package, that package image can be uploaded.

Two exceptions are defined. Under sub-subparagraph 6 of the same subparagraph, if opening the device package would compromise properties such as sterility and reliability and/or the device is in liquid form, only the package image can be uploaded to this field. Under sub-subparagraph 10, if the device is a software on its own, a screenshot of the software interface can be uploaded as the image; the provision in the same place in Article 27 of the Guide adds the software identity to this.

The remaining rules are also clear: the catalog itself is not uploaded as a product image, images belonging to other devices are not uploaded even if they belong to similar devices, at most 10 images are uploaded to the field, uploading unclear and unreadable images makes the application end unfavorably, and file names do not contain commercial extensions and expressions such as "WhatsApp".

We do not undertake the photography. What we do is screen the images that come in against these rules and report back to you, with reasons, those that do not comply.

The step after registration is complete

When the device reaches "Registered" status, there is one more step, and it is usually skipped. Under Article 36, paragraph 1 of the Guide, associating the barcodes of boxes, packages and containers containing multiple products with the device's individual product barcode, that is, adding market placement information, is done only for devices whose application ended favorably and that reached "Registered" status. Under paragraph 2 of the same article, this operation can also be carried out in bulk from the "Add Bulk Market Placement Information" screen.

The order of this step cannot be changed. A multi-package barcode cannot be entered before the record is opened; the record is opened with the barcode of the smallest package, and multi-package barcodes are added to this field later.

What will not be registered is also defined. Under Article 27, paragraph 7, subparagraph (dd), sub-subparagraph 5 and Article 25, paragraph 7, subparagraph (z), sub-subparagraph 5 of the Guide, only medical devices that fall within the definition of "Device", in vitro diagnostic devices and parts defined as accessories are registered in ÜTS; parts defined as spare parts are not registered in ÜTS. In portfolio lists, spare part items are often included in the scope of registration; separating them from the list is one of the first steps of the preparation.

The path followed on a rejection and revision decision

When an unfavorable decision arrives, our first reaction is not to open a new application. The Guide defines a separate route for this, and opening a new application without trying that route often produces the same result.

Under Article 40, paragraph 9 of the Guide, if the Agency has given a rejection or revision decision for one or more notifications in a device application and this decision is thought to be contrary to the relevant legislation or the Guide, the company can use the "Report Request" screen in ÜTS before making a new device application. "Medical Device Document and Product Registration Transactions" is selected as the request field, and the number assigned for the relevant device application is entered in the "Medical Device/Document Application Number" field.

The same paragraph sets two conditions. The request must refer to the legislation and/or the Guide provisions on the matter objected to; requests in which the application number is not entered, or which contain no reference to legislation, are not taken into evaluation. The same paragraph also states that the Agency will not be held responsible for applications that are sent for review by reapplying without being corrected through the request.

What we do here is concrete: we compare the reasoning of the decision with the relevant provision of the Guide, and if there is a ground that can be objected to, we prepare a request text with references. If there is no ground for objection, we say so plainly; in that case the right path is to correct what is missing and reapply. At no stage do we give a commitment on when an application will conclude, because the Guide defines no period for the conclusion of an application in any article.

For labeling and application type decisions on the document side, see ÜTS Document Registration Consultancy; for correcting files that ended unfavorably, see Correcting a Rejected ÜTS Application; and for reimbursement preparation, see SUT Code and Barcode Matching.

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara