top of page
< Back

Importing Medical Devices from Switzerland: ÜTS Registration and Document Requirements

Importing medical devices from Switzerland is asked about for product groups such as dental implants, hearing aids and surgical instruments. Since Switzerland is not an EU member, a Swiss manufacturer's device can be placed on the market in Türkiye only with an authorized representative in the EU or Türkiye. This page explains the importer's ÜTS steps for Swiss-origin devices with the text of the legislation.

Are Swissmedic and MedDO valid in Türkiye?

The competent authority for medical devices in Switzerland is Swissmedic (Swiss Agency for Therapeutic Products). According to Swissmedic's own pages, medical devices do not go through an official licensing procedure in Switzerland; Switzerland follows the EU's conformity assessment and certification system, and the agency's focus is market surveillance. The national regulation is the Medical Devices Ordinance of 1 July 2020 (MedDO, SR 812.213); for manufacturers not established in Switzerland, Swissmedic defines a Swiss authorized representative (CH-REP) symbol and obligations. This framework belongs to the Swiss market. In Türkiye, the condition for placing on the market is the CE marking and conformity with the Medical Device Regulation.

Swiss manufacturers do their CE certification with EU notified bodies and appoint an authorized representative for the EU market. As an importer, the documents you will request are the EU declaration of conformity, the EU notified body certificate and the EU authorized representative mandate. A CH-REP contract is not an authorized representative mandate for Türkiye.

It is the CE marking, not Swissmedic's market surveillance, that is the condition for placing on the market in Türkiye:

“Except for custom-made or investigational devices, devices that are considered to conform to the requirements of this Regulation bear the CE marking of conformity as shown in Annex V.”

Source: Medical Device Regulation, Article 20, paragraph 1.

Regulation Article 13/2-a places four verifications on the importer: the CE marking and declaration of conformity, identification of the manufacturer and the authorized representative, appropriate label and instructions for use, and the UDI where required. The second is the one most often missing in Swiss files; the CH-REP symbol does not replace the authorized representative in the EU or Türkiye. For the distinction between a declaration and a certificate, see the article on the differences between EC certificates and declarations of conformity.EC sertifikası ve uygunluk beyanı farkları yazısında.

 

An authorized representative in the EU or Türkiye is required for a Swiss manufacturer

Switzerland is not an EU member, and the Medical Device Regulation applies the authorized representative requirement to all manufacturers established outside Türkiye and EU member states. A Swiss manufacturer's device can be placed on the market in Türkiye only if an authorized representative established in Türkiye or the EU has been appointed. The representative the manufacturer appointed for the EU is also valid for Türkiye under the Customs Union.

“If the manufacturer is not established in Türkiye or in EU member states, the device may be placed on the market only if the manufacturer appoints an authorized representative.”

Source: Medical Device Regulation (OG 31499), Article 11, paragraph 1.

“Authorized representative: a natural or legal person established in Türkiye or EU member states who has been appointed in writing by the manufacturer, if the manufacturer is established outside Türkiye and EU member states, to perform certain obligations under this Regulation on its behalf”

Source: Medical Device Regulation (OG 31499, 2.6.2021), Article 3/1-lll.

“manufacturers established outside the territory of the EU or Turkey only need to designate one authorised representative, either in the EU or in Turkey, in order to place medical devices on the market in the EU or in Turkey.”

Source: EU-Turkey Customs Union Agreement in the Field of Medical Devices, Notice to Stakeholders, European Commission, March 2022, Section I.2.

In Turkish terms: for a manufacturer established outside the EU or Türkiye, a single representative in the EU or Türkiye is enough; the Swiss manufacturer's representative in the EU also covers Türkiye. Medex provides this service as an EU Authorised Representative in EUDAMED with number TR-AR-000057550; for Swiss manufacturers see the EU authorized representation for Swiss manufacturers and the authorized representation service for importers pages.EU Authorised Representative olarak verir; İsviçreli üreticiler için İsviçre üreticileri için AB yetkili temsilcilik, ithalatçı için yetkili temsilcilik hizmeti sayfalarına bakın.

The Swiss manufacturer's mandate is entered in the ‘EU Authorized Representative’ field in ÜTS (Guide Article 12/7-a) and is uploaded under the following rule:

“The original of the document and its Turkish translation by a sworn translator are uploaded together in the ‘Authorization Document’ field. No apostille or embassy/consulate approval is required on the original of the authorization document.”

Source: ÜTS Registration Guide, Article 12, paragraph 7, point (c).

 

Apostille, e-signature and translation for Swiss documents

According to the hcch.net table of contracting states, Switzerland ratified the Hague Apostille Convention on 10.1.1973 and the Convention entered into force on 11.3.1973. For a Swiss manufacturer's declaration of conformity, the apostille can be obtained from Switzerland or from the country where the manufacturer's EU authorized representative is located. Documents may be drawn up in German, French, Italian or English; whatever the language, a sworn Turkish translation is uploaded.

The Guide's order for the Swiss apostille and consular approval:

“a) The document with an apostille, or, 1) If the manufacturer is established in an EU member state, an apostille obtained from the competent authority of the country where the manufacturer is established; if the manufacturer is established in a country that is not an EU member state, an apostille obtained from the competent authority of the country where the manufacturer or the EU Authorized Representative authorized by the manufacturer is established is accepted.”

Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12, paragraph 1, point (a).

“b) The document approved by the Turkish embassy/consulate in the manufacturer's country, or, 1) if the manufacturer is established in a country that is not an EU member state, the approval of the Turkish embassy/consulate in the country where the manufacturer's EU Authorized Representative is established is also accepted.”

Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12/1-b.

Two rules for the Turkish translation of a German, French or Italian original:

“The complete Turkish translation, made by a sworn translator, of the document uploaded to the ‘Original Document’ field is uploaded to the ‘Turkish Document’ field.”

Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 12, paragraph 2.

“The relevant document bears the name and surname of the sworn translator who made the translation, their stamp/signature/seal, and the translator's declaration that the translation was made in conformity with the original of the document.”

Source: ÜTS Registration Guide, Article 12, paragraph 2, point (b).

The routes of uploading the apostilled original without a notary copy (Guide Article 12/1-a-2), the e-Apostille (12/1-c) and the e-signed document (12/1-ç) are in the apostille guide and e-Apostille verification articles; translation from the four official languages is on the sworn translation and document preparation page.apostil rehberi ve e-Apostil sorgulama yazılarında; dört resmi dilden yapılan çeviri yeminli tercüme ve belge hazırlığı sayfasında.

 

TAREKS and ÜTS import notification for Swiss consignments

A consignment shipped directly from Switzerland has no A.TR Movement Certificate; for products on the Annex-1 list of the Communiqué, TAREKS risk analysis applies. For product groups such as dental implants and hearing aids, whether the tariff position is on Annex-1 is checked product by product.

“All procedures related to the import inspection of medical devices are carried out through TAREKS and according to risk analysis.”

Source: Communiqué on Import Inspection of Medical Devices (Product Safety and Inspection: 2026/16), Article 4, paragraph 1.

“Permission to import the product or the creation of a TAREKS reference number for the product does not mean that the product is compliant with the legislation and/or safe.”

Source: Communiqué on Import Inspection of Medical Devices (Product Safety and Inspection: 2026/16), Article 12/2.

Post-customs ÜTS procedures for a product from Switzerland begin with two provisions:

“An ‘import notification’ is made for products whose country of origin in the product registration is not ‘Türkiye’.”

Source: Guide on Individual Movement Notifications of the Medical Device Product Tracking System (TİTCK), Article 7, paragraph 1.

“The importer or a dealer authorized for import notifications can make import notifications only for medical devices that are registered in ÜTS or that meet the conditions announced by the Agency within the transitional provisions of the Medical Device Regulation.”

Source: TİTCK Guide on Individual Movement Notifications, Article 7, paragraph 4.

If a dental implant or hearing aid is not registered in ÜTS, an import notification cannot be made, and without a notification a supply notification cannot be made. The chain is in the articles on ÜTS registration for importing medical devices and ÜTS individual movement notifications.tıbbi cihaz ithalatında ÜTS kaydı ve ÜTS tekil hareket bildirimleri yazılarında.

 

ÜTS steps for a device of Swiss origin

The sequence for a Swiss device: ÜTS company registration with a sales center authorization certificate and ÇKYS number (Guide Article 5/5), ÜTS document registration with the apostilled declaration and mandate, ÜTS product registration with Swiss origin and GTİP information, and an import notification for each consignment; the article on ÜTS registration for importing medical devices opens up all the steps. The rule for the origin field:satış merkezi yetki belgesi ve ÇKYS numarasıyla (Kılavuz Madde 5/5) ÜTS firma kaydı, apostilli beyan ve yetki belgesiyle ÜTS belge kaydı, İsviçre menşe ve GTİP bilgisiyle ÜTS ürün kaydı, her parti için ithalat bildirimi; tıbbi cihaz ithalatında ÜTS kaydı yazısı tüm adımları açar. Menşe alanının kuralı:

“The country where the device is physically produced is selected. More than one country can be selected in this field.”

Source: ÜTS Registration Guide, Article 27 (Country of Origin).

If the legal manufacturer is in Switzerland, ‘Imported’ is selected in the Imported/Domestic field, and the GTİP and Country Imported From become mandatory (Guide Article 27); for the GTİP see the GTİP code in ÜTS registration, and for contract manufacturing see the article on contract manufacturing and country of origin.ÜTS kaydında GTİP kodu, fason üretimde menşe için fason üretim ve menşe ülke yazısına bakın.

 

Summary table for Switzerland

 

TopicSwitzerlandCountry authoritySwissmedic (Swiss Agency for Therapeutic Products) (swissmedic.ch)National approvalNo licensing; the MedDO framework belongs to the Swiss marketAuthorized representativeMandatory; a CH-REP is not a representative for TürkiyeApostilIn force for Switzerland since 11.3.1973; can also be obtained from the country of the representative in the EULanguage of documentsGerman, French, Italian or English original + sworn Turkish translationCustomsNo A.TR for direct shipment; implant and hearing aid tariff positions are checked product by product against Annex-1

 

For other countries: importing medical devices from the United Kingdom, importing medical devices from Germany.İngiltere'den tıbbi cihaz ithalatı, Almanya'dan tıbbi cihaz ithalatı.

 

Medical Device ÜTS Registration Consultancy for Imports from Switzerland

We prepare the Swiss manufacturer's declaration, certificate and EU representative mandate for ÜTS with apostille and sworn translation in four languages; for files such as dental implants and hearing aids, we handle company, document and product registrations and import notifications. Request a price quote or reach us on +90 505 580 46 22 and info@medexmedikal.com.Fiyat teklifi alın veya +90 505 580 46 22 numarasından ve info@medexmedikal.com adresinden ulaşın.

Frequently Asked Questions

Switzerland applies the same system as the EU; is an authorized representative still required?

Yes. The criterion in Regulation Article 11/1 is whether the manufacturer is established in Türkiye or EU member states; Switzerland is not an EU member. The footnote in the Turkish translation of MDCG 2022-16 also defines the Union market as the EU member states, EEA countries and, through the Customs Union, Türkiye; Switzerland is not in this list.

Can a Swiss manufacturer's CH-REP be the authorized representative for Türkiye?

The CH-REP is the representative established in Switzerland defined by Swissmedic for the Swiss market. Regulation Article 3/1-lll requires a representative established in Türkiye or EU member states; a CH-REP established in Switzerland does not fall within this definition.

From which authority should I obtain the Swiss apostille?

Guide Article 12/1-a-1 accepts an apostille obtained from the competent authority of the country where the manufacturer is established; alternatively, the apostille of the country of the EU authorized representative is also accepted. The authorities competent to issue apostilles in Switzerland are listed on the country page at hcch.net.

Is a TAREKS application needed when importing Swiss-origin dental implants?

Annex-1 of the Communiqué includes items under position 9021 such as 9021.21.90.00.00, 9021.29.00.00.00 and 9021.31.00.00.00. If the device's customs tariff position is on Annex-1, a TAREKS application is made under Article 4/1; the A.TR exemption does not apply for Switzerland.

The Swiss manufacturer's declaration of conformity is in German. Can I have the Turkish translation made via an English translation?

Guide Article 12/2 requires the sworn translation of the document uploaded to the Original Document field in the Turkish Document field. The translation must be made from the German original, and under Article 12/2-b the translator's declaration must state conformity with the original.

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara