Importing Medical Devices from France: ÜTS Registration and Document Requirements
Importing medical devices from France is a common question for product groups such as dermal fillers, surgical instruments and orthopedic implants. Since French manufacturers are established in the EU, there is no authorized representative requirement; the difficulty lies in preparing the documents with the authentication and translation that ÜTS requires. This page explains the importer's ÜTS steps for French-origin devices together with the text of the legislation.
Is there such a thing as an ANSM approval document?
The competent authority for medical devices in France is ANSM (Agence nationale de sécurité du médicament et des produits de santé); ANSM is the body listed for France in the European Commission's list of national competent authorities, and on ANSM's own website medical devices and in vitro diagnostic devices fall within the agency's remit. Under the MDR system there is no national pre-market approval for a device; a French manufacturer places the device on the market with the CE marking under the MDR. The documents used in ÜTS are the French manufacturer's EU declaration of conformity and the notified body certificate.
French manufacturers mostly draw up the declaration of conformity bilingually in French and English. The whole bilingual document is uploaded to the Original Document field; only the Turkish section of the sworn translation is placed in the Turkish Document field.
It is the CE marking, not a notification to ANSM, that is the condition for placing on the market in Türkiye (Regulation Article 20/1). Four points the importer verifies before placing on the market:
“a) To place a device on the market; the importer verifies that: 1) the device bears the CE marking and the EU declaration of conformity has been drawn up, 2) the manufacturer is identified and an authorized representative has been appointed by the manufacturer in accordance with Article 11, 3) the device is labelled in accordance with this Regulation and the required instructions for use accompany the device, 4) where applicable, a UDI has been assigned by the manufacturer in accordance with Article 27.”
Source: Medical Device Regulation, Article 13, paragraph 2, subparagraph (a).
The second of these four points is met automatically for imports from France: since the manufacturer is established in the EU, the authorized representative requirement does not arise. The remaining three, namely the CE marking, the Turkish label and instructions for use, and the UDI, are under the importer's control. For the difference between the EC certificate and the declaration of conformity, see the article on EC certificate and declaration of conformity differences.EC sertifikası ve uygunluk beyanı farkları yazısına bakın.
No authorized representative requirement for a French manufacturer
France is an EU member state. The Regulation's authorized representative requirement applies only to manufacturers outside Türkiye and the EU; when importing from a French manufacturer, the EU Authorized Representative field in ÜTS document registration is left blank. The Commission's Customs Union notice confirms this. By contrast, if the device of a French manufacturer belongs to a legal manufacturer outside the EU (for example, if the French company is only a distributor), the representative requirement arises again; the document is checked to see who the legal manufacturer is.
“If the manufacturer is not established in Türkiye or an EU member state, the device may be placed on the market only on condition that the manufacturer appoints an authorized representative.”
Source: Medical Device Regulation, Article 11, paragraph 1.
"Manufacturers established in the EU have no obligation to designate an authorised representative in Turkey in order to place devices on the Turkish market."
Source: Notice to Stakeholders, EU-Turkey Customs Union Agreement in the Field of Medical Devices (European Commission, March 2022), I.1.
In other words: there is no obligation to appoint a representative in Türkiye for a manufacturer established in the EU; the TİTCK translation of MDCG 2022-16 gives the same result in a footnote:
“‘Union market’ refers to the territory of the Member States of the European Union and, owing to the European Economic Area (EEA), is extended to Norway, Liechtenstein and Iceland and, through the Customs Union Agreement, to Türkiye.”
Source: MDCG 2022-16, TİTCK Turkish translation, footnote 1.
The representative requirement arises again if the company in France is only a distributor and the legal manufacturer is outside the EU. In ÜTS, this distinction is made according to the firm that issues the declaration of conformity. For manufacturers outside the EU, we described the representation service on the EU Authorised Representative page at medexeurep.com (EUDAMED SRN TR-AR-000057550); for the content of the mandate, see the article on the authorized representative mandate and responsibility.medexeurep.com üzerinden EU Authorised Representative sayfasında (EUDAMED SRN TR-AR-000057550) anlattık; yetki belgesi içeriği için yetkili temsilci yetki belgesi ve sorumluluğu yazısına bakın.
Apostille, e-signature and translation for French documents
According to the hcch.net table of contracting parties, France ratified the Hague Apostille Convention on 25.11.1964 and the Convention entered into force on 24.1.1965. For the French manufacturer's declaration of conformity, the apostille is obtained from the competent authority of France. If the e-signed certificates of French notified bodies carry a verifiable e-signature, the original of the certificate is uploaded without an apostille. A sworn Turkish translation of a French-language document is mandatory.
Uploading the apostilled original and the e-signature option for a French declaration:
“The original of the apostilled document must be uploaded to ÜTS; there is no need to upload a copy of this document issued by a Turkish notary or by a notary of another country.”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 12/1-a-2.
“ç) For documents electronically signed by the manufacturer (e-signed), provided that it can be verified through e-signature verification tools/data that the document was electronically signed by its manufacturer, that the e-signature is valid, and that the document has not been altered afterwards, the original of the relevant e-signed document,”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 12/1-ç.
2026/KKB-2 update: With TİTCK Announcement No. 2026/KKB-2 dated 02.11.2026, a new route replaced the option of uploading the manufacturer's e-signed original for the declaration of conformity and the SİP declaration of a foreign manufacturer: TİTCK'nın 02.11.2026 tarihli 2026/KKB-2 Sayılı Duyurusu ile yabancı imalatçıya ait uygunluk beyanı ve SİP beyanında, imalatçının e-imzalı belge aslını yükleme seçeneğinin yerine yeni yol getirildi:
“it has been decided to apply the option of uploading the relevant document to the relevant field in ÜTS, by an authorized official of the importer firm authorized by the foreign manufacturer, together with an undertaking electronically signed with an e-signature (secure e-signature) based on a qualified electronic certificate obtained from an electronic certificate service provider recognized by Türkiye.”
Source: TİTCK Announcement No. 2026/KKB-2. Required documents and steps: ÜTS document registration guide.ÜTS belge kaydı rehberi.
If the e-signed certificate of a French notified body can be verified in EUDAMED with all its pages, the original is uploaded:
“e) Provided that the certificate in question is uploaded to EUDAMED by the notified body that issued it, together with all its current and valid pages, and that the certificate can be accessed and verified in EUDAMED with all its pages;”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 8/1-e.
The Turkish document to be uploaded alongside the French original:
“The Turkish translation of the document uploaded to the ‘Original Document’ field, made by a sworn translator, is uploaded in full to the ‘Turkish Document’ field.”
Source: ÜTS Registration Guide, Article 12, paragraph 2.
For the apostille rule (Guide Article 12/1-a), e-Apostille (12/1-c) and the translator's stamp requirement (12/2-b), see the apostille guide, e-Apostille query and sworn translation and document preparation pages.apostil rehberi, e-Apostil sorgulama ve yeminli tercüme ve belge hazırlığı sayfalarına bakın.
Customs with an A.TR from France, then the ÜTS import notification
Products in free circulation in the EU arrive from France with an A.TR Movement Certificate and the TAREKS reference number is created directly; risk analysis keeps the physical inspection gate open. The reference number is not proof that the product complies with the legislation; the importer's responsibility continues.
“In the assessment to be made according to risk analysis, products within the scope of the first paragraph may also be referred to physical inspection.”
Source: Communiqué on Import Control of Medical Devices (ÜGD: 2026/16), Article 6/4.
“Permission to import a product or the creation of a TAREKS reference number for the product does not mean that the product complies with the legislation and/or is safe.”
Source: Communiqué on Import Control of Medical Devices (ÜGD: 2026/16), Article 12/2.
Once the French product clears customs, the import notification is made in ÜTS:
“For products whose country of origin in the product registration is not ‘Türkiye’, an ‘import notification’ is made.”
Source: TİTCK Individual Movement Notifications Guide, Article 7, paragraph 1.
The notification is limited to products registered in ÜTS (Individual Movement Guide Article 7/4); an import notification and the subsequent supply notification cannot be entered before the French product's registration is complete. The types are covered in the article on ÜTS individual movement notifications.ÜTS tekil hareket bildirimleri yazısında.
ÜTS steps for a French-origin device
Four ÜTS steps remain when importing from a French manufacturer: ÜTS company registration with the sales center authorization certificate that carries a ÇKYS number, ÜTS document registration with the declaration and certificate, ÜTS product registration with France as country of origin and the GTIP information, and an import notification for each consignment; the general process is in the article on ÜTS registration for importing medical devices. The licence requirement for company registration:satış merkezi yetki belgesi ile ÜTS firma kaydı, beyan ve sertifikayla ÜTS belge kaydı, Fransa menşe ve GTİP bilgisiyle ÜTS ürün kaydı, her parti için ithalat bildirimi; genel süreç tıbbi cihaz ithalatında ÜTS kaydı yazısında. Firma kaydındaki ruhsat şartı:
“Companies that will register as a ‘Manufacturer/Importer/Distributor/Exporter’ type company in ÜTS must hold a medical device sales center license, and the ÇKYS number must be entered during company registration.”
Source: ÜTS Registration Guide, Article 5, paragraph 5.
“If this field is selected as ‘Imported’, the ‘Imported Country’ and ‘GTIP Number’ fields that appear on the ÜTS registration screen and are mentioned in subparagraphs (c) and (ç) of this paragraph must be filled in.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 27, Imported/Manufactured Information, sub-item 4.
If the legal manufacturer is in France, the Imported/Manufactured field is set to Imported (Guide Article 27); for the GTIP, see the GTIP code in ÜTS registration article, and for origin in a device that a French brand has manufactured in a third country, see the contract manufacturing and country of origin article. Labeling obligation:ÜTS kaydında GTİP kodu, Fransız markanın üçüncü ülkede ürettirildiği cihazda menşe için fason üretim ve menşe ülke yazısına bakın. Etiket yükümlülüğü:
“Importers shall indicate their name, registered trade name or registered trade mark, the registered place of business and the address at which they can be contacted, on the device or on its packaging or in a document accompanying the device.”
Source: Medical Device Regulation (RG 31499, 2.6.2021), Article 13/3.
France summary table
TopicFranceCountry authorityANSM (Agence nationale de sécurité du médicament et des produits de santé) (ansm.sante.fr)National approvalNone; an ANSM notification is not a document type in ÜTSAuthorized representativeNot required; if the French company is only a distributor, the legal manufacturer is checkedApostilleIn force for France since 24.1.1965; a certificate with a verifiable e-signature needs no apostilleLanguage of documentsFrench original + sworn Turkish translationCustomsReference number created directly with A.TR; risk analysis can refer to physical inspection
For other countries: importing medical devices from Belgium, importing medical devices from Spain.Belçika'dan tıbbi cihaz ithalatı, İspanya'dan tıbbi cihaz ithalatı.
Medical Device ÜTS Registration Consultancy for Imports from France
We prepare the French manufacturer's declaration and certificate for ÜTS with apostille or e-signature verification, and French documents with sworn translation; on behalf of the importer, we complete the company, document and product registrations and the import notifications. Get a quote or reach us at +90 505 580 46 22 and info@medexmedikal.com.Fiyat teklifi alın veya +90 505 580 46 22 numarasından ve info@medexmedikal.com adresinden ulaşın.
Frequently Asked Questions
Is a French manufacturer's notification to ANSM used as a document in ÜTS?
No. The ÜTS document types are the EU declaration of conformity, the EC/EU certificate and documents under the former legislation. National notification outputs are not among these types.
Can I have only the English section of a bilingual French-English declaration of conformity translated?
Guide Article 12/2 requires the sworn translation of the document uploaded to the Original Document field to be uploaded in full to the Turkish Document field. If the original document is bilingual, the translation must cover the whole document; translating only one language section risks being treated as incomplete.
How do I fill in the EU Authorized Representative field in ÜTS for a French manufacturer?
Guide Article 12/7-a makes this field mandatory only for manufacturers established outside the EU and Türkiye. For a French legal manufacturer, the field is left blank.
Are documents still requested for a consignment arriving from France with an A.TR?
Communiqué Article 6/1 provides that the reference number is created directly for products with an A.TR Movement Certificate, while Article 6/4 says that these products can also be referred to physical inspection based on risk analysis. In physical inspection, the documents in Annex-2 are uploaded within twenty working days.
The French company is only a distributor and the legal manufacturer is in the USA. Is a representative required?
Yes. The authorized representative requirement is determined by where the legal manufacturer is established. If the manufacturer issuing the declaration of conformity is in the USA, Regulation Article 11/1 applies and the EU Authorized Representative field becomes mandatory in ÜTS document registration.
