Importing Medical Devices from the United Kingdom: ÜTS Registration and Document Requirements
Importing medical devices from the United Kingdom has become third-country import after Brexit. A British manufacturer's UKCA marking and MHRA registration are not used in Türkiye; the device is registered in Türkiye only with the CE marking and an authorized representative in the EU or Türkiye. This page explains the ÜTS steps for UK-origin devices with the text of the legislation.
Are the UKCA marking and MHRA registration valid in Türkiye?
Medical devices in Great Britain are regulated by the MHRA (Medicines and Healthcare products Regulatory Agency). According to MHRA's guidance on gov.uk, UKCA is the product marking for devices placed on the Great Britain market and is not recognized by the EU and Northern Ireland; manufacturers established outside Great Britain must appoint a UK Responsible Person. The same guidance states that CE-marked devices will be accepted on the Great Britain market until 30 June 2030 at the latest. All of these arrangements relate to the Great Britain market. In Türkiye, the condition for placing a device on the market is the CE marking and conformity with the Medical Device Regulation; the UKCA marking alone cannot be the basis for ÜTS registration.
If the British manufacturer maintains CE certification for the EU market, it also has an authorized representative in the EU. As an importer, the documents you will request from the British manufacturer are the EU declaration of conformity, the EU notified body certificate and the EU authorized representative mandate; a UK Approved Body certificate is not a document type in ÜTS.
The condition the UKCA marking does not meet is the CE marking (Regulation Article 20/1). The importer's pre-market verification list:
“a) To place a device on the market; 1) the importer verifies that the device bears the CE marking and the EU declaration of conformity has been drawn up, 2) the manufacturer is identified and an authorized representative has been appointed by the manufacturer in accordance with Article 11, 3) the device is labelled in accordance with this Regulation and the required instructions for use accompany the device, 4) where applicable, a UDI has been assigned by the manufacturer in accordance with Article 27.”
Source: Medical Device Regulation (OG 31499, 2.6.2021), Article 13, paragraph 2, point (a).
The item most often missing in British files is the second verification: MHRA registration and the UKCA marking do not replace the CE marking, and a UK Responsible Person does not replace the authorized representative in the Regulation. The distinction between a declaration and a certificate is in the article on the differences between EC certificates and declarations of conformity.EC sertifikası ve uygunluk beyanı farkları yazısında.
An authorized representative in the EU or Türkiye is required for a British manufacturer
Since the United Kingdom is not an EU member, a British manufacturer's device can be placed on the market in Türkiye only if an authorized representative established in Türkiye or the EU has been appointed. The representative the British manufacturer appointed for the EU is also valid for Türkiye under the Customs Union. If the manufacturer has only a UK Responsible Person, this is not considered an authorized representative for Türkiye; a separate representative established in the EU or Türkiye is required.
“If the manufacturer is not established in Türkiye or in EU member states, the device may be placed on the market only if the manufacturer appoints an authorized representative.”
Source: Medical Device Regulation (OG 31499, 2.6.2021), Article 11, paragraph 1.
“If the manufacturer of a device is not established in a Member State, the device may be placed on the Union market only if the manufacturer designates a sole authorised representative [MDR and IVDR Article 11(1)].”
Source: MDCG 2022-16 Guidance on Authorised Representatives (TİTCK Turkish translation), Section 4 Designation and mandate.
According to the Commission's Customs Union notice, a manufacturer outside the EU and Türkiye appoints a single authorized representative for the two markets. Medex provides this service as an EU Authorised Representative in EUDAMED with number TR-AR-000057550; for British manufacturers see the EU authorized representation for UK manufacturers and the authorized representation service for importers pages. The original of the mandate and its sworn translation are uploaded together; no apostille is required on the document (Guide Article 12/7-c).EU Authorised Representative olarak verir; İngiliz üreticiler için Birleşik Krallık üreticileri için AB yetkili temsilcilik, ithalatçı için yetkili temsilcilik hizmeti sayfalarına bakın. Yetki belgesinin aslı ve yeminli çevirisi birlikte yüklenir; belgede apostil aranmaz (Kılavuz Madde 12/7-c).
It is the authorized representative in the EU or Türkiye, not the UK Responsible Person, that is entered in the ÜTS document registration:
“For document registration notifications of the ‘EU Declaration of Conformity (MDR/IVDR)’ type mentioned in this article that belong to manufacturers not established in an EU member state or Türkiye, entering the ‘EU Authorized Representative’ field on the ÜTS registration screen is mandatory.”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 12/7-a.
Apostille, e-signature and translation for British documents
According to the hcch.net table of contracting states, the United Kingdom ratified the Hague Apostille Convention on 21.8.1964 and the Convention entered into force on 24.1.1965. For a British manufacturer's declaration of conformity, the apostille can be obtained from the United Kingdom or from the country where the manufacturer's EU authorized representative is located. ÜTS accepts an e-Apostille provided it can be verified through its verification tool. Since the documents are in English, a sworn Turkish translation is mandatory.
The source of the apostille for the British declaration and e-Apostille verification in the Guide:
“a) The document with an apostille, or, 1) If the manufacturer is established in an EU member state, an apostille obtained from the competent authority of the country where the manufacturer is established; if the manufacturer is established in a country that is not an EU member state, an apostille obtained from the competent authority of the country where the manufacturer or the EU Authorized Representative authorized by the manufacturer is established is accepted.”
Source: ÜTS Registration Guide, Article 12, paragraph 1, point (a).
“c) In the case that the apostilled document mentioned in point (a) of this paragraph is created electronically (e-Apostille) by the competent authorities of states that are members of or parties to the Hague Convention; provided that the documents to which the apostille is applied can be accessed and verified through the verification tools (e.g. website) specified on the relevant e-Apostille; or provided that the relevant document can be verified by uploading the apostilled document and/or entering the apostille details through the verification tools (e.g. website) specified on the relevant e-Apostille; the original of the e-Apostille certified document,”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12/1-c.
The Turkish document to be uploaded next to the English original:
“The complete Turkish translation, made by a sworn translator, of the document uploaded to the ‘Original Document’ field is uploaded to the ‘Turkish Document’ field.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12, paragraph 2.
For uploading the apostilled original without a notary copy (Guide Article 12/1-a-2), consular approval (12/1-b), the e-signed document (12/1-ç) and the translator's stamp requirement (12/2-b), see the apostille guide, e-Apostille verification and sworn translation and document preparation pages.apostil rehberi, e-Apostil sorgulama ve yeminli tercüme ve belge hazırlığı sayfalarında.
TAREKS and ÜTS import notification for UK consignments
A consignment shipped directly from the United Kingdom has no A.TR Movement Certificate; for products on the Annex-1 list of the Communiqué, TAREKS risk analysis applies. In a physical inspection, the EU declaration of conformity, the Turkish label and instructions for use, and product images taken in the customs area are requested.
“All procedures related to the import inspection of medical devices are carried out through TAREKS and according to risk analysis.”
Source: Communiqué on Import Inspection of Medical Devices (ÜGD: 2026/16), Article 4, paragraph 1.
“EU Declaration of Conformity (together with a certified copy of its Turkish translation if it is issued in other languages)”
Source: Communiqué on Import Inspection of Medical Devices (Product Safety and Inspection: 2026/16), Annex-2, third item.
A single product coming from the United Kingdom is accepted into ÜTS only if it is registered:
“The importer or a dealer authorized for import notifications can make import notifications only for medical devices that are registered in ÜTS or that meet the conditions announced by the Agency within the transitional provisions of the Medical Device Regulation.”
Source: ÜTS Individual Movement Notifications Guide, Article 7, paragraph 4.
An import notification is mandatory for a product whose origin is not Türkiye (Individual Movement Guide Article 7/1); without a registration there can be no notification, and without a notification no supply transaction can be made. The process is in the article on ÜTS registration for importing medical devices.tıbbi cihaz ithalatında ÜTS kaydı yazısında.
ÜTS steps for a device of UK origin
Five steps for a British device: ÜTS company registration as importer with a sales center authorization certificate, ÜTS document registration with the CE declaration of conformity, certificate and EU representative mandate, ÜTS product registration with the Country Imported From and GTİP fields, and an import notification per consignment. All of it is in the article on ÜTS registration for importing medical devices; the licence requirement for company registration:satış merkezi yetki belgesi ile ithalatçı türünde ÜTS firma kaydı, CE uygunluk beyanı, sertifika ve AB temsilci yetki belgesiyle ÜTS belge kaydı, İthal Edilen Ülke ve GTİP alanlarıyla ÜTS ürün kaydı, parti bazında ithalat bildirimi. Tamamı tıbbi cihaz ithalatında ÜTS kaydı yazısında; firma kaydı için ruhsat şartı:
“Firms that will register in ÜTS as ‘Manufacturer/Importer/Dealer/Exporter’ must hold a medical device sales center license, and the ÇKYS number must be entered during company registration.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 5, paragraph 5.
“If this field is selected as ‘Imported’, the ‘Country Imported From’ and ‘GTİP Number’ fields that appear on the ÜTS registration screen and are mentioned in points (c) and (ç) of this paragraph must be filled in.”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 27, Imported/Domestic Information-4.
If the legal manufacturer is in the United Kingdom, ‘Imported’ is selected in the Imported/Domestic field (Guide Article 27); for the GTİP see the GTİP code in ÜTS registration, and for a device produced in Northern Ireland or a third country see the article on contract manufacturing and country of origin.ÜTS kaydında GTİP kodu, Kuzey İrlanda veya üçüncü ülkede üretilen cihazda Menşei Ülke için fason üretim ve menşe ülke yazısına bakın.
Summary table for the United Kingdom
TopicUnited KingdomCountry authorityMHRA (Medicines and Healthcare products Regulatory Agency) (gov.uk)Is UKCA used in ÜTSNot used; the CE marking and EU declaration of conformity are requiredAuthorized representativeMandatory; a UK Responsible Person is not considered a representative for TürkiyeApostilIn force for the United Kingdom since 24.1.1965; e-Apostille accepted if it can be verifiedLanguage of documentsEnglish original + sworn Turkish translationCustomsNo A.TR for direct shipment; TAREKS risk analysis for Annex-1 tariff positions
For other countries: importing medical devices from Israel, importing medical devices from Canada.İsrail'den tıbbi cihaz ithalatı, Kanada'dan tıbbi cihaz ithalatı.
Medical Device ÜTS Registration Consultancy for Imports from the United Kingdom
We prepare the British manufacturer's CE documents, the mandate of the representative in the EU or Türkiye and the e-Apostille verification according to the ÜTS Guide, upload the English documents with sworn translation, and handle registrations and import notifications on behalf of the importer. Request a price quote or reach us on +90 505 580 46 22 and info@medexmedikal.com.Fiyat teklifi alın veya +90 505 580 46 22 numarasından ve info@medexmedikal.com adresinden ulaşın.
Frequently Asked Questions
Can I upload a UK Approved Body certificate of a British manufacturer to ÜTS?
No. The certificate types an importer can register in ÜTS are the EC Certificate or EU Certificate (MDR/IVDR), which are issued by EU notified bodies. Guide Article 7/7 refers to a NANDO query for a notified body not defined in ÜTS; a UK Approved Body is not an EU notified body.
Is a UK Responsible Person considered an authorized representative for Türkiye?
No. Regulation Article 3/1-lll defines the authorized representative as a person established in Türkiye or EU member states. The UK Responsible Person is established in Great Britain and, according to MHRA guidance, is for the Great Britain market.
A CE-marked British device is valid in the UK until 2030; is Türkiye also bound to this date?
No. 30 June 2030 is the date given in MHRA guidance for the acceptance of CE-marked devices in the Great Britain market. In Türkiye, the CE marking is a condition for placing on the market under Regulation Article 20 and has nothing to do with this date.
Is a British e-Apostille accepted in ÜTS?
Guide Article 12/1-c accepts an e-Apostille created electronically by states party to the Hague Convention, provided it can be verified through the verification tool on the document and the original is uploaded. A document with an e-Apostille whose e-signature cannot be verified is rejected.
Is there a difference if the British manufacturer's device is produced in Northern Ireland?
In the ÜTS registration, the country where the device is physically produced is entered in the Country of Origin field, and the authorized representative requirement is determined by where the legal manufacturer is established. If the legal manufacturer is established in the United Kingdom, an authorized representative in the EU or Türkiye is required under Regulation Article 11/1.
