Importing Medical Devices from Malaysia: ÜTS Registration and Document Requirements
Malaysia is one of the main countries from which latex and nitrile products such as examination gloves, surgical gloves and condoms come to Türkiye. A Malaysian manufacturer's MDA registration is not sufficient for ÜTS registration in Türkiye; the device must bear the CE marking, have an authorized representative, and have its documents uploaded to ÜTS with consular legalization or an e-signature. Since Malaysia is not a party to the Apostille Convention, the authentication route differs from other countries; this page explains that difference step by step.
The difference between MDA registration and ÜTS registration in Türkiye
In Malaysia, medical devices are regulated by the Medical Device Authority (MDA, Pihak Berkuasa Peranti Perubatan) under the Medical Device Act 2012 (Act 737). The MDA's official portal publishes the provision under Section 5(1) of Act 737 that no medical device shall be imported, exported or placed in the market unless the medical device is registered under this Act. That is, MDA registration is mandatory for a Malaysian manufacturer to sell in its own market, and it will show this registration to the Turkish importer.
MDA registration is valid for the Malaysian market. What is sought in Türkiye is the CE marking showing that the requirements of the Medical Device Regulation are met, and the EU declaration of conformity on which it is based.
“Devices that meet the requirements of this Regulation when duly supplied and properly installed, maintained and used in accordance with their intended purpose may be placed on the market or put into service.”
Source: Medical Device Regulation Article 5/1.
“Except for custom-made or investigational devices, devices that are considered to conform to the requirements of this Regulation bear the CE marking of conformity as shown in Annex V.”
Source: Medical Device Regulation (OG 31499), Article 20, paragraph 1.
A significant part of the gloves from Malaysia is marketed both as a medical device (examination glove) and as personal protective equipment. Only the product that has a medical purpose and whose declaration of conformity refers to the Medical Device Regulation (MDR) is registered in ÜTS. Our pages on examination glove ÜTS registration and condom ÜTS registration give the document lists specific to these product groups. In classes that require a notified body certificate, such as condoms and surgical gloves, MDA registration does not replace the certificate.Muayene eldiveni ÜTS kaydı ve prezervatif ÜTS kaydı sayfaları bu ürün gruplarına özel belge listelerini verir. Prezervatif ve cerrahi eldiven gibi onaylanmış kuruluş sertifikası gerektiren sınıflarda MDA kaydı sertifikanın yerini tutmaz.
Who will be the Malaysian manufacturer's authorized representative
Since the manufacturer is established in Malaysia, placing the device on the market in Türkiye depends on the manufacturer appointing an authorized representative established in the EU or Türkiye. The Regulation gives the importer the duty to verify that this appointment has been made.
“If the manufacturer is not established in Türkiye or in EU member states, the device may be placed on the market only if the manufacturer appoints an authorized representative.”
Source: Medical Device Regulation (OG 31499), Article 11(1).
“The importer verifies that: 1) the device bears the CE marking and the EU declaration of conformity has been drawn up, 2) the manufacturer is identified and an authorized representative has been appointed by the manufacturer in accordance with Article 11, 3) the device is labelled in accordance with this Regulation and the required instructions for use accompany the device, 4) where applicable, a UDI has been assigned by the manufacturer in accordance with Article 27.”
Source: Medical Device Regulation (OG 31499, 2.6.2021), Article 13, paragraph 2, point (a).
The validity of the authorized representative appointment depends on a written mandate and the representative's written acceptance.
“The appointment of an authorized representative becomes valid when a mandate is issued and accepted in writing by the authorized representative, and covers, as a minimum, all devices of the same generic device group.”
Source: Medical Device Regulation Article 11/2.
MDCG 2022-16 explains the rule of a single authorized representative for the same generic device group; for the same generic group, a glove manufacturer cannot appoint one representative in the EU and a separate one for Türkiye.
“However, for a given generic device group, the manufacturer should appoint only one authorized representative (i.e. the ‘sole’ authorized representative).”
Source: MDCG 2022-16 (TİTCK translation), Section 4.
“‘Union market’ refers to the territory of the European Union Member States and, through the European Economic Area (EEA), is extended to Norway, Liechtenstein and Iceland and, through the Customs Union Agreement, to Türkiye.”
Source: MDCG 2022-16 (TİTCK translation), first footnote.
If the Malaysian manufacturer has no representative in the EU, it can appoint a representative established in Türkiye. Medex provides this service under its EUDAMED-registered SRN TR-AR-000057550; the scope is on the Malaysia page of medexeurep.com. When registering the document in ÜTS, the importer needs this representative's details and the mandate.medexeurep.com Malezya sayfasında yer alır. İthalatçının ÜTS'de belge kaydı yaparken bu temsilcinin bilgisine ve yetki belgesine ihtiyacı olur.
“For document registration notifications of the ‘EU Declaration of Conformity (MDR/IVDR)’ type mentioned in this article that belong to manufacturers not established in an EU member state or Türkiye, entering the ‘EU Authorized Representative’ field on the ÜTS registration screen is mandatory.”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 12, paragraph 7, point (a).
“The original of the document and its Turkish translation by a sworn translator are uploaded together in the ‘Authorization Document’ field. No apostille or embassy/consulate approval is required on the original of the authorization document.”
Source: ÜTS Registration Guide, Article 12, paragraph 7, point (c).
For the duties and responsibilities of the authorized representative, see our page on the authorized representative and the authorization letter.yetkili temsilci ve yetki belgesi yazısına bakılabilir.
No apostille: consular approval or e-signature for Malaysian documents
Malaysia does not appear in the table of contracting states to the Apostille Convention on hcch.net. For this reason, the apostille option of the ÜTS Registration Guide cannot be used for an EU declaration of conformity issued in Malaysia; the other options of the Guide apply.
“b) The document approved by the Turkish embassy/consulate in the manufacturer's country, or, 1) if the manufacturer is established in a country that is not an EU member state, the approval of the Turkish embassy/consulate in the country where the manufacturer's EU Authorized Representative is established is also accepted.”
Source: ÜTS Registration Guide, Article 12, paragraph 1, point (b).
“The document approved by the Turkish embassy/consulate itself must be uploaded to ÜTS; there is no need to upload a copy of this document issued by a Turkish notary or a notary of another country.”
Source: ÜTS Registration Guide Article 12/1-b-2.
The second sentence gives the importer important flexibility: if the Malaysian manufacturer's authorized representative is in an EU country that is a party to the Apostille Convention, or in Türkiye, the document can also be certified with an apostille in the representative's country or with approval of the Turkish consulate in that country.
“If the manufacturer is established in an EU member state, an apostille obtained from the competent authority of the country where the manufacturer is established is accepted; if the manufacturer is established in a country that is not an EU member state, an apostille obtained from the competent authority of the country where the manufacturer or the EU Authorized Representative authorized by the manufacturer is established is accepted.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 8/1-a.
The third route is the e-signature. If the manufacturer signs the EU declaration of conformity with a verifiable qualified e-signature, no apostille or consular approval is required; however, the original of the signed file is uploaded, and if the e-signature cannot be verified, the document is rejected.
“ç) For documents signed electronically by the manufacturer (e-signed), provided that it can be verified through e-signature verification tools/data that the document was signed electronically by its manufacturer, that the e-signature is valid and that no changes have been made to the document afterwards, the original of the relevant e-signed document,”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12, paragraph 1, point (ç).
2026/KKB-2 update: With TİTCK Announcement No. 2026/KKB-2 dated 02.11.2026, a new route was introduced in place of the option of uploading the manufacturer's e-signed original for the declaration of conformity and SİP declaration of a foreign manufacturer: TİTCK'nın 02.11.2026 tarihli 2026/KKB-2 Sayılı Duyurusu ile yabancı imalatçıya ait uygunluk beyanı ve SİP beyanında, imalatçının e-imzalı belge aslını yükleme seçeneğinin yerine yeni yol getirildi:
“It has been decided to apply the option of uploading the document to the relevant field in ÜTS together with an undertaking signed electronically, by an authorized officer of the importer company authorized by the foreign manufacturer, with an e-signature (secure e-signature) based on a qualified electronic certificate obtained from an electronic certificate service provider recognized by Türkiye.”
Source: TİTCK Announcement No. 2026/KKB-2. Required documents and steps: ÜTS document registration guide.ÜTS belge kaydı rehberi.
“For e-signature verification of the e-signed document, the original of the relevant e-signed document must be uploaded to ÜTS.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 12/1-ç-1.
For notified body certificates, Guide Article 8/1-d additionally accepts the certificate published on the body's official query site; if the certificate is not e-signed, a copy certified by a Turkish notary is requested.
If the documents are in English or Malay, the Turkish translation certified by a sworn translator is uploaded as a separate file.
“Only the Turkish part of the document certified by the sworn translator is uploaded to the ‘Turkish Document’ field.”
Source: ÜTS Registration Guide Article 12/2-a.
“The relevant document bears the name and surname of the sworn translator who made the translation, their stamp/signature/seal, and the translator's declaration that the translation was made in conformity with the original of the document.”
Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 12, paragraph 2, point (b).
Medex determines the certification route of documents coming from Malaysia after seeing the document, and prepares the sworn translation for ÜTS with the stamp and translator's declaration. Cases where consular approval is requested in place of an apostille are explained separately in the apostille guide.ÜTS için yeminli tercümeyi kaşe ve tercüman beyanı ile hazırlar. Apostil yerine konsolosluk onayı istenen durumlar apostil rehberinde ayrıca anlatılır.
TAREKS inspection at customs
Examination gloves (3926.20.00.00.12, and sub-positions 4015.12 and 4015.19) and condoms (4014.10.00.00.00) are on the Annex-1 list of the Communiqué on Import Inspection of Medical Devices. For these products every import consignment is notified to TAREKS; risk analysis decides whether the consignment goes to physical inspection.
“All procedures related to the import inspection of medical devices are carried out through TAREKS and according to risk analysis.”
Source: Communiqué on Import Inspection of Medical Devices (ÜGD: 2026/16), Article 4, paragraph 1.
“For products not directed to physical inspection as a result of the risk analysis, the TAREKS reference number stating that they may be imported is created directly.”
Source: Communiqué on Import Inspection of Medical Devices (2026/16) Article 8/4.
For a consignment selected for physical inspection, the Annex-2 documents are uploaded within twenty working days.
“For products directed to physical inspection, the documents specified in the third, fourth and fifth items of Annex-2 are uploaded electronically to TAREKS within twenty working days, including the application day, and additional time is given by the system if requested in TAREKS.”
Source: Communiqué on Import Inspection of Medical Devices (2026/16), Article 9, paragraph 1.
“The EU Declaration of Conformity and the relevant EU Certificate or Certificates issued by a notified body in accordance with the conformity assessment procedures to which the product is subject, as specified in the Regulations in Article 1 of this Communiqué (together with certified copies of their Turkish translations if they are issued in other languages) (*)”
Source: Communiqué on Import Inspection of Medical Devices (2026/16), Annex-2, item 3.
“5. Product images of the product to be imported, taken in the customs area”
Source: Communiqué on Import Inspection of Medical Devices (2026/16), Annex-2, item 5.
The TAREKS user is defined in the Ministry of Trade system by the authorized person in the company's signature circular; this is separate from ÜTS user definition.
“The company definition procedure is carried out only by the company authority.”
Source: Communiqué on the Risk-Based Control System in Foreign Trade (2025/28), Article 4/2.
TAREKS approval does not prove the conformity of the product; the Communiqué states this explicitly and leaves the responsibility with the importer.
“Permission to import the product or the creation of a TAREKS reference number for the product does not mean that the product is compliant with the legislation and/or safe.”
Source: Communiqué on Import Inspection of Medical Devices (ÜGD: 2026/16), Article 12, paragraph 2.
Origin and customs duty matters are outside this page; your customs broker will guide you according to the current legislation of the Ministry of Trade.
ÜTS sequence for importing gloves from Malaysia
- The medical device sales center authorization certificate is obtained from the Provincial Health Directorate; for ÜTS company registration as an importer, the ÇKYS number is mandatory. See sales center authorization certificate. İl Sağlık Müdürlüğü'nden alınır; ithalatçı türünde ÜTS firma kaydı için ÇKYS numarası zorunludur. Bkz. satış merkezi yetki belgesi.
- ÜTS company registration is opened through MERSİS. See ÜTS company registration. MERSİS üzerinden açılır. Bkz. ÜTS firma kaydı.
- Document registration: EU declaration of conformity (original with consular approval or e-signed + Turkish translation), the notified body certificate if any, and the authorized representative's mandate. See ÜTS document registration. AB uygunluk beyanı (konsolosluk onaylı veya e-imzalı asıl + Türkçe tercüme), varsa onaylanmış kuruluş sertifikası, yetkili temsilci yetki belgesi. Bkz. ÜTS belge kaydı.
- Product registration: each glove size is registered with a separate UDI-DI; label and packaging images are added. See ÜTS product registration consultancy. her eldiven bedeni ayrı UDI-DI ile kaydedilir; etiket ve ambalaj görselleri eklenir. Bkz. ÜTS ürün kayıt danışmanlığı.
- Import notification: lot number, quantity, expiry date, country of import and country of origin are entered per consignment. parti bazında lot numarası, adet, son kullanma tarihi, ithal edildiği ülke ve menşe ülke girilir.
“Registration to ÜTS of firms that sell and/or apply medical devices is carried out if they are authorized under the relevant legislation.”
Source: ÜTS Registration Guide Article 5/1.
“Firms that will register in ÜTS as ‘Manufacturer/Importer/Dealer/Exporter’ must hold a medical device sales center license, and the ÇKYS number must be entered during company registration.”
Source: ÜTS Registration Guide TCKKD-KLVZ-03 V4.0, Article 5, paragraph 5.
“An ‘import notification’ is made for products whose country of origin in the product registration is not ‘Türkiye’.”
Source: Guide on Individual Movement Notifications of the Medical Device Product Tracking System (TİTCK), Article 7, paragraph 1.
“The import notification can be made by the importer as well as by a dealer authorized by the importer.”
Source: ÜTS Individual Movement Notifications Guide Article 7/3.
Authorizing a dealer for import notifications is useful for firms that send glove consignments from customs directly to the dealer's warehouse. The notification screens are explained in the individual movement notifications article. Firms that bring gloves from Thailand or China as well as Malaysia should note the apostille difference on the page about importing medical devices from China.tekil hareket bildirimleri yazısında anlatılır. Malezya ile birlikte Tayland veya Çin'den eldiven getiren firmalar Çin'den tıbbi cihaz ithalatı sayfasındaki apostil farkına dikkat etmelidir.
Malaysia summary table
TopicSituation for MalaysiaCountry authorityMedical Device Authority (MDA), Ministry of Health Malaysia; Medical Device Act 2012 (Act 737) (mda.gov.my)Is an EU/TR authorized representative requiredYes. The manufacturer is outside the EU or Türkiye; Regulation Article 11/1 and ÜTS Guide Article 12/7-aParty to the Apostille ConventionNo (not on the hcch.net list of contracting parties). Certification: approval of the Turkish embassy/consulate in Malaysia, apostille/consular approval in the country of the authorized representative, or the manufacturer's e-signatureLanguage of documents uploaded to ÜTSCertified or e-signed original + Turkish translation certified by a sworn translator; mandate original + Turkish translation
Medical Device ÜTS Registration Consultancy for Imports from Malaysia
For imports from Malaysia, Medex handles ÜTS company, document and product registrations, import notifications and the sworn translation for ÜTS. Send your documents and we will tell you in writing which certification and translation are required. Request a price quote, call +90 505 580 46 22 or write to info@medexmedikal.com.Fiyat teklifi alın, +90 505 580 46 22 numarasını arayın veya info@medexmedikal.com adresine yazın.
Frequently Asked Questions
Can I sell gloves registered with the MDA in Malaysia directly in Türkiye?
No. MDA registration is for the Malaysian market under Act 737. In Türkiye, the CE conformity marking is required under Article 20 of the Medical Device Regulation and the EU declaration of conformity verified by the importer under Article 13; the product cannot be sold by sales centers unless registered in ÜTS.
Since Malaysia is not a party to the Apostille Convention, how do I have the document authenticated?
Under Article 12/1-b of the ÜTS Registration Guide, certification by the Turkish embassy/consulate in the manufacturer's country is obtained. If the manufacturer has an EU authorized representative, an apostille from the representative's country or Turkish consulate certification there is also accepted. The third option is the original of a verifiably e-signed document under Article 12/1-ç.
Is an e-signed EU declaration of conformity sufficient on its own?
Under Article 12/1-ç of the Guide, it is sufficient if the validity of the e-signature and the absence of later changes to the document can be verified; no apostille or consular legalization is sought. The original of the e-signed file is uploaded; a scanned copy breaks the e-signature verification and the document is rejected.
Must a Malaysian glove manufacturer also appoint an authorized representative separately in Türkiye?
The authorized representative may be established in the EU or in Türkiye; MDCG 2022-16 states that the Union market covers Türkiye through the Customs Union. If the manufacturer already has a representative in the EU, the same authorization document is uploaded to ÜTS. A second representative cannot be appointed for the same generic device group.
What is done in ÜTS for each glove consignment?
Under Article 7 of the Individual Movement Notifications Guide, for products whose origin is not Türkiye, each consignment is entered into ÜTS with an import notification. The notification can only be made for products registered in ÜTS; an erroneous notification is corrected with an import cancellation notification under Article 7/8.
