top of page
< Back

Dental Prosthesis Laboratory ÜTS Registration: Scope, Authorization Certificate and Custom-Made Devices

A dental prosthesis laboratory is a workplace that manufactures patient-specific prostheses according to a dentist's prescription. The Medical Device Sales, Advertising and Promotion Regulation leaves these laboratories outside its scope but keeps ÜTS registration procedures within scope. This page explains the laboratory's position with respect to ÜTS, the sales center authorization certificate status and the custom-made device provisions, based on the text of the legislation.

How a dental prosthesis laboratory appears in the legislation

The Regulation keeps dental prosthesis laboratories bound to the Regulation on Dental Prosthesis Laboratories (OG 26016):

"Public health institutions and organizations, opticianry establishments within the scope of the Regulation on Opticianry Establishments published in the Official Gazette dated 18/1/2014 and numbered 28886, custom-made prosthesis and orthosis centers and hearing aid centers within the scope of the Regulation on Custom-Made Prosthesis and Orthosis Centers and Hearing Aid Centers published in the Official Gazette dated 24/9/2011 and numbered 28064, and dental prosthesis laboratories within the scope of the Regulation on Dental Prosthesis Laboratories published in the Official Gazette dated 7/12/2005 and numbered 26016 are outside the scope of this Regulation. However, the trade, advertising, information, clinical support and promotion activities of medical devices placed on the market at or made available on the market through these places by means of distance communication, and the registration procedures for the registration and information management systems determined by the Agency, are within the scope of this Regulation."

Source: Medical Device Sales, Advertising and Promotion Regulation (RG 29001), Article 2, paragraph 2.

The same Regulation also contains an exception relating to the building in which the laboratory is located; a sales center can be opened in buildings that contain a dental prosthesis laboratory:

"A sales center cannot be opened in a building that houses a healthcare institution or organization, including its garden and annexes, except for buildings that contain polyclinics and practices opened by physicians and dentists, laboratory diagnostic centers that provide only analysis and imaging services, pharmacies, opticianry establishments, hearing aid centers, custom-made prosthesis and orthosis centers and dental prosthesis laboratories."

Source: Medical Device Sales, Advertising and Promotion Regulation (RG 29001), Article 34, paragraph 1.

The TİTCK implementation guide counts the dental prosthesis laboratory among sales centers in terms of establishment advertising and leaves the evaluation to the Regulation on Dental Prosthesis Laboratories (TCS-KLVZ-08 Article 15/9).

 

Is a dental prosthesis laboratory required to register in ÜTS

The last sentence of Article 2/2 brings the 'registration procedures for the registration and information management systems determined by the Agency' for devices placed on the market at or made available through out-of-scope places within the scope of the Regulation. This system is ÜTS. The second ground for ÜTS registration comes from the supply chain:

"Sales centers are prohibited from selling devices other than those listed in Annex-3 to places not registered in the Agency's registration and information management system, except for the places specified in the guide published by the Agency."

Source: Medical Device Sales, Advertising and Promotion Regulation (RG 29001), Article 26, paragraph 7.

The dental prosthesis laboratory obtains medical devices such as dental alloys, acrylic and implant superstructure parts from medical device sales centers. A sales center cannot sell devices other than those in Annex-3 to a place not registered in ÜTS. If the laboratory is not registered in ÜTS, the sales center cannot make a transfer notification to it and the sale cannot take place.

 

How to open an ÜTS company registration

The ÜTS Registration Guide's definition of a company covers, besides the listed types, companies that sell and/or apply medical devices 'in similar fields':

"Company: A company that sells and/or applies medical devices in fields such as medical device sales centers, manufacturers/importers/dealers/exporters, opticianry establishments, hearing aid application centers, custom-made orthosis-prosthesis application centers, pharmacies, pharmaceutical warehouses and similar,"

Source: Guide on Medical Device Registration Processes in the Product Tracking System (TCKKD-KLVZ-03, V4.0), Article 4, paragraph 1 subparagraph (o).

"The registration of companies that sell and/or apply medical devices in ÜTS is carried out if they are authorized under the relevant legislation."

Source: Guide on Medical Device Registration Processes in the Product Tracking System (TCKKD-KLVZ-03, V4.0), Article 5, paragraph 1.

"Company registrations are carried out based on MERSİS or VEDOP. If a company has both a MERSİS and a VEDOP number, the procedure is carried out under the MERSİS number. Company registration procedures for pharmacies are carried out based on EBS."

Source: Guide on Medical Device Registration Processes in the Product Tracking System (TCKKD-KLVZ-03, V4.0), Article 5, paragraph 2.

The laboratory is considered authorized by its license under the Regulation on Dental Prosthesis Laboratories; the application is made through the MERSİS number (company) or tax identification number (sole proprietorship). Under Article 5/3 of the Guide, no physical documents are required in the application for the 'company with a MERSİS record' or 'sole proprietorship without a MERSİS record' types.

 

Is a medical device sales center authorization certificate required for a dental prosthesis laboratory

Since the laboratory is placed outside the scope of the Regulation by Article 2/2, the sales center authorization certificate process in Articles 5 to 7 of the Regulation is not run for dental prosthesis activity.

Two situations fall outside this exception. First, if the laboratory imports dental materials from abroad itself, it must open an importer registration in ÜTS, and a sales center license is required for this registration:

"In other words, companies that will register as a “Manufacturer/Importer/Dealer/Exporter” type in ÜTS must hold a medical device sales center license, and the ÇKYS number must be entered during company registration."

Source: Guide on Medical Device Registration Processes in the Product Tracking System (TCKKD-KLVZ-03, V4.0), Article 5, paragraph 5.

Second, no authorization certificate is required for the sale of denture care products for individual use in Annex-3, but this exception does not cover the manufacturer and importer:

"Denture care products for individual use."

Source: Medical Device Sales, Advertising and Promotion Regulation (OG 29001), Annex-3, item 2.

"No authorization certificate is required for places where the devices listed in Annex-3 are sold, excluding their manufacturer or importer. This exception does not remove the obligations determined by other relevant legislation."

Source: Medical Device Sales, Advertising and Promotion Regulation (RG 29001), Article 33, paragraph 2.

 

Patient-specific dental prosthesis: custom-made medical device provisions

The ÜTS Registration Guide defines a custom-made medical device (ITC) as a device made specifically for a particular patient according to the written prescription of an authorized person, and expressly states that the person who wrote the prescription in the ITC statement may be a dentist:

"the name of the person who wrote the prescription (physician or dentist), authorized by virtue of their professional qualifications, and, if any, the name of the relevant healthcare institution,"

Source: Guide on Medical Device Registration Processes in the Product Tracking System (TCKKD-KLVZ-03, V4.0), Article 29, paragraph 5 subparagraph (d).

On the ÜTS ITC registration screen as well, the dentist is a separate personnel type:

"In the “Select Physician/Dentist” screen in this field, it is mandatory to select either “Physician” or “Dentist” as the personnel type."

Source: Guide on Medical Device Registration Processes in the Product Tracking System (TCKKD-KLVZ-03, V4.0), Article 29, paragraph 13, subparagraph (ç) (ITC registration screen).

On the other hand, the Guide ties the ÜTS application for ITCs other than custom-made orthopedic orthoses-prostheses to a specific company type:

"For ITCs other than custom-made orthopedic orthoses-prostheses, only companies that manufacture or import the relevant ITC and whose activity area registered in ÜTS is “Manufacturer/Importer/Dealer/Exporter”,"

Source: Guide on Medical Device Registration Processes in the Product Tracking System (TCKKD-KLVZ-03, V4.0), Article 29, paragraph 3, subparagraph (b).

Read together, these two provisions mean that a laboratory that wants to register the prosthesis it produces in ÜTS as a custom-made medical device must be registered with the Manufacturer/Importer/Dealer/Exporter activity area; this activity area requires a sales center license and a ÇKYS number under Article 5/5. The laboratory being out of scope for its own activity does not change this ITC registration path. Which path to follow is determined by the laboratory's product flow; Medex makes this assessment based on the existing license and product list.

 

Mandatory ÜTS notifications of a dental prosthesis laboratory

 

NotificationWhenBasisReceipt NotificationWhen dental materials from the sales center are receivedIndividual Movement Guide Article 10/1Transfer NotificationWhen materials are returned to the supplier or given to another ÜTS-registered placeIndividual Movement Guide Article 9/1Disposal/Loss NotificationFor materials that have passed their expiry date or been lostIndividual Movement Guide Article 15/1Custom-Made Medical Device ApplicationWhen the prosthesis is to be registered in ÜTS as an ITC (subject to the company type condition above)ÜTS Registration Guide Article 29/3-b

 

"A receipt notification is made to accept the transfer notifications made by an institution/company/hospital."

Source: Guide on ÜTS Individual Movement Notifications of Medical Devices, Article 10, paragraph 1.

"If a receipt notification is made incorrectly, it cannot be cancelled. To cancel the transaction, a new transfer notification must be made to the company/institution/hospital that made the transfer notification, and the relevant party must receive the medical devices with a receipt notification."

Source: Guide on ÜTS Individual Movement Notifications of Medical Devices, Article 10, paragraph 4.

 

Online sales and advertising

Online sales and advertising to consumers of devices sold, adapted or applied at the laboratory are prohibited:

"Only devices sold, adapted or applied at hearing aid centers, custom-made prosthesis and orthosis centers, opticianry establishments or dental prosthesis laboratories,"

Source: Medical Device Sales, Advertising and Promotion Regulation (OG 29001), Article 26, paragraph 5, subparagraph (a).

"are prohibited from being sold to consumers on the internet, while the sale on the internet of medical devices not covered by this article is made only by sales centers authorized under this Regulation."

Source: Medical Device Sales, Advertising and Promotion Regulation (RG 29001), Article 26, paragraph 5.

 

Common mistakes

  • Trying to obtain materials from a sales center without an ÜTS company registration; a sales center cannot sell non-Annex-3 devices to a place not registered in ÜTS (Article 26/7).
  • Not answering the sales center's transfer notification with a receipt notification; the stock transfer does not take place (Individual Movement Guide Article 9/2).
  • Trying to cancel an incorrect receipt notification; a receipt notification cannot be cancelled (Article 10/4).
  • Importing materials from abroad and trying to register products in ÜTS without an importer registration and a sales center license (ÜTS Registration Guide Article 5/5).
  • Advertising the prosthesis to consumers on the internet (Article 15/1-a).

 

Related pages

 

Medical Device ÜTS Registration Consultancy for Dental Prosthesis Laboratories

To open your ÜTS company registration as a dental prosthesis laboratory, set up your notification flow or carry out your sales center authorization certificate process, you can work with Medex. We review your current license and product list and tell you in writing which company type the registration will be opened under and which notifications are mandatory. Get a quote, call +90 505 580 46 22 or write to info@medexmedikal.com.Fiyat teklifi alın, +90 505 580 46 22 numarasını arayın veya info@medexmedikal.com adresine yazın.

Frequently Asked Questions

Is a dental prosthesis laboratory required to register in ÜTS?

Yes. While Article 2/2 of the Regulation leaves the laboratory outside its scope, it keeps registration procedures relating to the Agency's registration system within scope. In addition, under Article 26/7, sales centers cannot sell devices other than those in Annex-3 to places not registered in ÜTS; a laboratory without a registration cannot procure dental materials.

Is a dental prosthesis laboratory required to obtain a sales center authorization certificate?

Not for its own activity; it is outside the scope under Article 2/2. If it imports materials itself, or will register the prostheses it produces in ÜTS as custom-made medical devices, a Manufacturer/Importer/Dealer/Exporter registration is required, and for this registration a sales center license and a ÇKYS number are mandatory under Article 5/5 of the ÜTS Registration Guide.

Is a prosthesis produced with a dentist's prescription a custom-made medical device?

Article 4/t of the ÜTS Registration Guide defines an ITC as a device made specifically for a particular patient according to the written prescription of a person authorized under Law No. 1219; Article 29/5-d states that the person who wrote the prescription in the ITC statement may be a dentist, and the 'Dentist' personnel type is selected on the ÜTS registration screen.

Which ÜTS notifications does the laboratory make?

A receipt notification is made for materials received from the sales center, a transfer notification for returns or transfers, and a disposal/loss notification for materials that have passed their expiry date or been lost. No stock transfer takes place without a receipt notification.

Is an authorization certificate required for denture care products?

No. Denture care products for individual use are in item 2 of Annex-3 of the Regulation; under Article 33/2, no authorization certificate is required for places where these products are sold, excluding their manufacturer or importer.

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara