top of page

PMS Plan, PMS Report and PSUR Preparation: For ÜTS-Registered Devices

We prepare the PMS plan, PMS report and PSUR from your own data; support for serious incident reports.

PMS Plan, PMS Report and PSUR Preparation: For ÜTS-Registered Devices

Medical Device PMS Plan, PMS Report and PSUR Preparation

For your medical device, we prepare the post-market surveillance (PMS) plan, the PMS report for Class I devices, and the periodic safety update report (PSUR) for Class IIa, IIb and III devices. We compile the reports from your complaint, sales and incident records and complete them with literature and public information on similar devices. We also stand by you in preparing serious incident and field safety corrective action reports. To start, send the device list, your existing PMS documents and the complaint records of the recent period; you can use our price quote form.

Who it is for

  • Domestic manufacturers: those whose ÜTS-registered device has no PMS plan written, or whose technical file has no current PMS report or PSUR.
  • Class I and Class A device manufacturers: those who prepare the PMS report on their own responsibility, without a notified body seeing it.
  • Class IIa, IIb and III device manufacturers: those who must update the PSUR at regular intervals and want to outsource this work.
  • Manufacturers abroad and their importers in Türkiye: those who must submit the PMS documents requested by the Agency in Turkish and as an orderly file.

Legal basis

PMS is a part of the manufacturer’s quality management system and is set up separately for each device:

“For each device, manufacturers shall plan, establish, document, implement, maintain and update a post-market surveillance system in a manner that is proportionate to the risk class and appropriate for the type of device. That system shall be an integral part of the manufacturer’s quality management system referred to in Article 10(9).” (Medical Device Regulation Art. 81/1)

The system rests on a PMS plan written according to the requirements in Section 1 of Annex III, and the plan is part of the technical documentation (Art. 82/1). For Class I devices, the result of the plan is a PMS report:

“Manufacturers of class I devices shall prepare a post-market surveillance report summarising the results and conclusions of the analyses of the post-market surveillance data gathered as a result of the post-market surveillance plan referred to in Article 82 together with a rationale and description of any preventive and corrective actions taken. The report shall be updated when necessary and made available to the Agency upon request.” (Medical Device Regulation Art. 83/1)

For Class IIa, IIb and III devices, the PSUR takes the place of this report (Art. 84/1-a). The update frequency varies by class:

“b) Manufacturers of class IIb and class III devices shall update the periodic safety update report at least annually. That report shall, except in the case of custom-made devices, form part of the technical documentation as specified in Annexes II and III. c) Manufacturers of class IIa devices shall update the periodic safety update report when necessary and at least every two years. That report shall, except in the case of custom-made devices, form part of the technical documentation as specified in Annexes II and III.” (Medical Device Regulation Art. 84/1-b and c)

For IVD devices, the same structure is in the IVD Regulation: the PMS report for Class A and B devices is regulated in Art. 80/1, and the PSUR for Class C and D devices in Art. 81/1. We explain the general framework of the subject on our PMS and vigilance page and the details of Art. 83 on our post-market surveillance article page.

What we write in the PMS plan

The plan is built according to Section 1 of Annex III. In the plan we write where the data will come from, how it will be evaluated and at what threshold action will be taken:

  • Information on serious incidents and field safety corrective actions.
  • Records of non-serious incidents and undesirable side-effects.
  • Information subject to trend reporting.
  • Relevant literature, databases and registries.
  • Feedback and complaints from users, distributors and importers.
  • Publicly available information about similar devices.

For each source, we define in the plan from whom, how often and in what format the data will be collected, and how it will be linked to the risk management file, the clinical evaluation and the instructions for use. The plan is proportionate to the risk analysis in the technical file and to the class of the device.

What we write in the PMS report and the PSUR

The PMS report and the PSUR are summaries of the data collected through the implementation of the plan. In both, we write the rationale and description of each corrective and preventive action taken in the period. The PSUR also contains the three headings listed in Art. 84/1-a:

  • The conclusions of the benefit-risk determination.
  • The main findings of the post-market clinical follow-up (PMCF); you provide the PMCF findings, and we incorporate them into the report.
  • The volume of sales of the device and an estimate evaluation of the size and other characteristics of the population using the device and, where practicable, the usage frequency of the device.

In the reports we identify the device by its Basic UDI-DI, so that the report matches the device in the ÜTS record and in the declaration of conformity under the same key. We compare the product name, model and class in the report with your declaration of conformity and your ÜTS record. See also UDI-DI and Basic UDI-DI.

Vigilance: serious incident and FSCA reports

Serious incidents and field safety corrective actions (FSCA) concerning devices on the market are reported to the Agency through the electronic system referred to in Article 89, in accordance with Art. 85/1. The deadlines are short:

“Manufacturers shall report any serious incident as referred to in point (a) of paragraph 1 immediately after they have established the causal relationship between that incident and their device or that such causal relationship is reasonably possible and, in any event, not later than 15 days after they become aware of the incident.” (Medical Device Regulation Art. 85/3)

In the event of a serious public health threat, the period does not exceed 2 days (Art. 85/4), and in the event of death or an unanticipated serious deterioration in a person’s state of health, it does not exceed 10 days (Art. 85/5). Where necessary, an initial report may be submitted before the complete report (Art. 85/6).

We do not make decisions in vigilance on your behalf. The manufacturer decides whether the incident is reportable and on the causality assessment. From the incident information you hold, we prepare the draft of the report, list the missing information, write the draft of the notification going out to the field for an FSCA, and support the submission of the report. For deadlines and the notification flow, see our post on vigilance and serious incident reporting.

What we check in existing PMS documents

If you have a PMS plan or an old report, we read it before writing from scratch. The points we check are:

  • Does the plan cover every device or device group in the device list; is there a model left out of scope?
  • Does each of the information sources in Section 1 of Annex III find a counterpart in the plan?
  • Is it written who will keep the complaint and incident records and in what format?
  • Does the report contain the rationale and description of corrective and preventive actions in the period?
  • Does the risk assessment in the report use the same hazards and the same acceptability criteria as the risk analysis in the technical file?
  • Is the estimate of sales and number of users in the PSUR consistent with the sales data you provided?
  • Are the product name, model, class and Basic UDI-DI in the report the same as in the declaration of conformity and the ÜTS record?

If we find a missing or contradictory point, we write it in the list together with the article it is based on. If we find the existing document usable, we do not rewrite it; we only complete the missing sections.

PMS, the technical file and the ÜTS record

Under Art. 82/1 and Art. 84/1-b and c, the PMS plan and the PSUR are part of the technical documentation; for Class I devices, the PMS report is submitted to the Agency upon request. For this reason, we consider the PMS documents together with the rest of the technical file: if a new hazard has emerged in the risk analysis, or if a new warning is needed in the instructions for use, we write in the report, as a recommendation, that the risk file or the instructions be updated. The manufacturer makes the update. If the whole technical file needs to be looked at, we carry out this work together with our technical file pre-review service.

Process

  • You send the device list, their classes, the existing PMS plan or old reports, and the risk analysis section of the technical file.
  • We read the existing documents against Articles 81–84 and Annex III; we send you the missing headings and the data we need from you as a list.
  • You send your complaint, sales, incident, corrective action and, if any, PMCF records; we search the literature and public information on similar devices.
  • We write the PMS plan, the PMS report or the PSUR and send you the draft.
  • You review the draft; we incorporate the corrections and send the final version ready for your signature.
  • In the next period, we update it with the same structure: annually for Class IIb and III, and for Class IIa when necessary and at the latest every two years.

What we deliver

  • A PMS plan written according to Section 1 of Annex III.
  • A PMS report for Class I and Class A, B devices.
  • A PSUR for Class IIa, IIb, III and Class C, D devices.
  • A summary of the literature and similar device search with its source list.
  • Data collection templates: complaint record, incident record, sales and usage data tables.
  • Where vigilance is needed, a draft serious incident or FSCA report and a draft of the notification going out to the field.

What we ask from you

  • Device list: product name, model, risk class and Basic UDI-DI.
  • Existing PMS plan, old PMS reports or PSURs, if any.
  • The risk management and clinical evaluation sections of the technical file.
  • Complaint and adverse event records and corrective and preventive action records for the period.
  • Sales quantities and countries of sale.
  • The PMCF plan and PMCF report, if any.
  • The declaration of conformity, for comparing the name, model and class information.

Out of scope

  • Notified body conformity assessment and CE certification.
  • Test and laboratory processes, including laboratory selection and arranging tests.
  • Interpreting or changing your technical specifications.
  • Finding an importer or distributor.

We do not conduct PMCF studies or clinical investigations; nor do we decide on the manufacturer’s behalf on the reportability or causality of an adverse event.

Related services

Frequently asked questions

Is a PSUR needed for a Class I device?

No. For Class I devices, Art. 83/1 requires a PMS report. The PSUR, under Art. 84/1, is for Class IIa, IIb and III devices.

How often is the PSUR updated?

At least annually for Class IIb and III devices, and when necessary and at least every two years for Class IIa devices (Art. 84/1-b and c).

Do I have to send the PMS report to the Agency?

Under Art. 83/1, the PMS report is updated when necessary and made available to the Agency upon request. The report must be ready in the technical file.

We have no complaint records; can a report still be written?

Yes. If there are no records, we state this in the report as it is, and we write in the plan how records will be kept from now on. Data that does not exist is not put into the report.

Do you submit the serious incident report yourselves?

We prepare the report and support its submission. The manufacturer decides whether the incident is reportable and on causality; the report is submitted on the manufacturer’s behalf.

Do you also carry out the PMCF study?

No. You provide the PMCF findings and we incorporate them into the PSUR. We state the need for a PMCF plan in the PMS plan.

Do you prepare these for IVD devices as well?

Yes. According to Art. 80 and 81 of the IVD Regulation: a PMS report for Class A and B, and a PSUR for Class C and D.

For the legal basis of the PMS system, the PMS plan, the PMS report and the PSUR update frequency, see our PSUR and post-market surveillance guide page.

To get started, you can request a quote for ÜTS registration consultancy.

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara