top of page

ÜTS Document Registration: Document Types, Application Types, Review and Rejection Process

12 hours ago
9 min read
ÜTS belge kaydı ve belge başvurusu

SUMMARY

ÜTS document registration means entering a medical device’s certificate, declaration of conformity, instructions for use and similar documents into the Product Tracking System (ÜTS) and bringing them to “Registered” status by applying to the Authority for document registration. In product registration, the documents linked to the device are selected from the registered documents.

This article explains the document types, application steps and rejection process from the ÜTS Registration Guideline TCKKD-KLVZ-03 of TİTCK, by article number and with direct quotations.

For registering your documents in ÜTS in accordance with the Guideline: Medical Device ÜTS Registration Consultancy

Contents

1. What Is ÜTS Document Registration?

Entering a document notification is not enough. Article 39 of the guideline requires an application to the Authority:

“ARTICLE 39- (1) An application to the Authority is required for the document registration or update notifications, as specified in Articles 8, 9, 12, 13, 15, 16, 18, 19, 21, 22 or 23 of this Guideline, to be evaluated in accordance with the relevant medical device legislation and the provisions of this Guideline.”

Document registration comes after company registration and before product registration. For company registration, see our ÜTS company registration and for product registration, our ÜTS product registration articles.

2. Document Types in ÜTS

The third section of the guideline regulates document types in separate articles:

  • EC Certificate (Article 6): notified body certificates under the old medical device regulations (MDD, AIMDD, IVDD).

  • EU Certificate (MDR/IVDR) (Article 7): notified body certificates under the new regulations.

  • Declaration of Conformity (Article 10): declarations of conformity under the old regulations.

  • EU Declaration of Conformity (MDR/IVDR) (Article 11): declarations of conformity under the new regulations.

  • System/Procedure Pack Statement (MDR) (Article 22) (Article 14): statement of the manufacturer of a system or procedure pack.

  • Instructions for Use (Article 17): instructions for use issued by the manufacturer.

  • Intended Use Form/Statement (Article 19): only for Class IIa devices under MDD, if the manufacturer has not issued instructions for use.

  • Other types: Quality Management Certificate - ISO-13485 (Article 20), Domestic Goods Certificate (Article 22), Authorized Distributorship Certificate (Article 23) and Catalog (Article 24).

“ARTICLE 7- (1) The document type “EU Certificate (MDR/IVDR)” is the document type used only in notifications and applications concerning certificates prepared by a notified body under the New Medical Device Regulations. For certificates issued under the Old Medical Device Regulations, a document registration/update notification and application is made with the document type “EC Certificate”.”

For catalogs, the guideline sets a separate rule:

“(2) Uploaded catalogs are registered in ÜTS without being subject to review by the review expert.”

3. Document Business Rules by Class

The documents to be linked to a device are determined by document business rules according to class. For MDR, Article 66 of the guideline:

  • “(3) For devices to be registered in ÜTS under MDR as “Class-I Other”, “Class-Is”, “Class-Im” or “Class-Ir”, the appropriate one of the ÜTS document business rules shown in Annex-88 is applied.”

  • “(4) For devices to be registered in ÜTS under MDR as “Class-IIa”, the appropriate one of the ÜTS document business rules shown in Annex-89 is applied.”

  • “(8) For devices to be registered in ÜTS under MDR as “Class-III”, the appropriate one of the ÜTS document business rules shown in Annex-93 is applied.”

For Class IIb, implantable devices and devices under Rule 12 are regulated in separate annexes (Annex-90, Annex-91, Annex-92). The document business rules under IVDR are in Article 67; for details see our IVDR ÜTS document registration article.

The instructions-for-use requirement also depends on class. Article 17 of the guideline lists, under MDR and MDD:

“1) For Class-III and Class-IIb devices, instructions for use issued by the manufacturer,”

“(3) For devices in other risk groups (Class-I Other, Class-Im, Class-Is, Class-Ir, Class A, Class A Sterile and IVD Other devices), uploading instructions for use is optional.”

For Class IIa devices, if the manufacturer has issued instructions for use, they are uploaded. When the Authority considers it necessary, it may also request instructions for use for devices in the optional groups.

4. Fields Checked in the EU Declaration of Conformity

“(3) The EU Declaration of Conformity is issued by the legal manufacturer.”

The second paragraph of Article 11 of the guideline lists the fields checked in the document review. Some of them:

  • “a) The name or trade name and address of the manufacturer,”

  • “ç) A statement that the EU declaration of conformity is issued under the sole responsibility of the manufacturer,”

  • “d) Basic UDI-DI,”

  • “g) The risk class of the device,”

  • “ı) For EU declarations of conformity other than those covering only Class-I Other or Class A devices; the name and identification number of the notified body, a description of the conformity assessment procedure carried out and identification of the EU certificate or EU certificates issued (certificate number or numbers),”

  • “l) The place and date of issue of the declaration,”

“The information entered into the system and the information in the document must be the same.”

For preparing the declaration, see our manufacturer declaration of conformity article.

5. Different Rules for Domestic Manufacturers and Importers

A domestic manufacturer’s own declaration is uploaded e-signed and in Turkish. Article 13 of the guideline:

  • “a) It is mandatory to apply by selecting “İmalatçı Firmalar için e-imzalı Belge Başvurusu” (e-Signed Document Application for Manufacturer Companies) as the Document Application Type.”

  • “c) Documents whose original document language is Turkish are accepted.”

  • “1) Since the relevant e-signed document will be checked automatically by the system, the e-signed document must have been signed electronically by the company’s “Mesul Müdür” (Responsible Manager) or “İmza Yetkilisi” (Signatory).”

The importer uploads the foreign manufacturer’s document to the “Orijinal Doküman” (Original Document) field in one of the forms listed in Articles 8 and 12 of the guideline: an apostilled original, an original certified by a Republic of Türkiye embassy/consulate, an e-Apostille certified original, or an original of an e-signed document. The rule for the Turkish document field:

“(2) Where the condition mentioned in the first paragraph of this article exists, a complete Turkish translation of the document uploaded to the “Original Document” field, made by a sworn translator, is uploaded to the “Türkçe Doküman” (Turkish Document) field.”

For the certification forms, see our medical device apostille guide article. The documents do not need to be sent physically:

“(6) For the evaluation by the Authority of the document applications created under Article 39 of this Guideline for the document registration or update notifications mentioned in paragraphs one to four of this article, the documents uploaded to the “Original Document” and, if any, “Turkish Document” sections do not need to be sent physically to the Authority.”

2026/KKB-2: Uploading Documents to ÜTS with the Importer Representative’s Secure e-Signature

Announcement No. 2026/KKB-2 of TİTCK dated 02.11.2026 introduced a new route in place of the option of uploading the original e-signed document of the foreign manufacturer under Articles 12 and 15 of the Guideline:

“In this context, in place of the option of uploading the original of the e-signed document belonging to the foreign manufacturer to the “Original Document” field mentioned in subparagraph (ç) of the first paragraphs of Articles 12 and 15 of the Guideline, it has been decided to apply the option of uploading the said document to the relevant field in ÜTS together with an undertaking electronically signed, by an authorized representative of the importer company authorized by the foreign manufacturer, with an e-signature (secure e-signature) created on the basis of a qualified electronic certificate obtained from an electronic certificate service provider recognized by the Republic of Türkiye.”

On this route, the ÜTS document registration rests on three parts: the e-Signature Authorization Statement (e-İmza Yetkilendirme Beyanı) issued by the manufacturer for the importer (ANNEX-2 of the announcement), the Importer Company Undertaking (İthalatçı Firma Taahhütnamesi) signed with the secure e-signature of the importer representative (ANNEX-1), and the sworn Turkish translation of the document. For the declaration of conformity and the EU/EC certificate, the authorization statement is uploaded to the “Belgedeki Ürün(ler)e Ait Teknik Doküman” (Technical Document of the Product(s) in the Document) field. The statement is confirmed by TİTCK through the manufacturer’s corporate e-mail:

“In order for the Authority to confirm the relevant statement, the e-mail sent to the official/corporate e-mail address(es) of the manufacturer representative(s) specified in the statement must be answered within 3 business days.”

“(7) The foreign manufacturer company must issue a separate e-Signature Authorization Statement for each importer company.”

The apostille, consulate and e-Apostille options remain in force. The announcement is valid until a new document type called “e-İmza Yetkilendirme Beyanı” is created in ÜTS.

6. How Is a Document Application Made?

“(2) To make a document application, one enters the screen of the same name from the “Belge Başvurusu Oluştur” (Create Document Application) field on the “Belge Başvuru İşlemleri” (Document Application Transactions) screen under the “Belge” (Document) tab in ÜTS.”

There are four types in the “Başvuru Tipi” (Application Type) list:

  • “a) “İthalatçı Firmalar için Belge Başvurusu” (Document Application for Importer Companies),”

  • “b) “İthalatçı veya İmalatçı Firmalar için diğer türlerde (Kullanma Kılavuzu, Kullanım Amacı Formu, Kalite Yönetim Belgesi - ISO13485, Yerli Malı Belgesi, Yetkili Distribütörlük Belgesi) Belge Başvurusu” (Document Application for Importer or Manufacturer Companies in other types: Instructions for Use, Intended Use Form, Quality Management Certificate - ISO13485, Domestic Goods Certificate, Authorized Distributorship Certificate),”

  • “c) “İmalatçı Firmalar için e-imzalı Belge Başvurusu” (e-Signed Document Application for Manufacturer Companies) and”

  • “ç) “2023/KK-1 Sayılı Duyuru Kapsamında Belge Başvurusu” (Document Application Under Announcement No. 2023/KK-1)”

After the type is selected, documents are chosen in the “Başvuruya Eklenecek Belgeler” (Documents to Be Added to the Application) field, and the “Onayla” (Confirm) action is made on the “Belge Başvurusu Özeti” (Document Application Summary) screen opened with “Başvuru Oluştur” (Create Application). This action is performed only by the company’s users of the “Tıbbi Cihaz Kayıt Elemanı” (Medical Device Registration Staff) type. If there is no procedural violation, the application is created in “Awaiting Signature” status.

“(15) A document application contains at most 5 document notifications.”

7. Signature, Payment and Review

  • “(13) An application in “Awaiting Signature” status is signed electronically by the company’s applicant signatory.”

  • “b) Documents other than the document types mentioned in subparagraph (a) of this paragraph move to “Under Review” status as soon as the document application is electronically signed.”

  • “(14) Applications that do not reach “Under Review” status cannot be evaluated by the Authority’s review expert.”

The types in subparagraph (a) are the EC certificate, EU certificate, declaration of conformity, EU declaration of conformity and system/procedure pack statement (Articles 6, 7, 10, 11 and 14). Applications containing them move to “Awaiting Payment” status after signature; once the fee is paid and approved, they become “Under Review”.

8. Rejection, Revision and Request Update Decisions

The Authority may issue a “Ret” (Rejection) or “Revizyon” (Revision) decision for a document notification, or grant a 3-day update period with “Güncelleme İste” (Request Update). If the decision is considered contrary to the legislation or the Guideline, re-evaluation is requested from the “Talep Bildir” (Notify Request) screen before making a new application:

“The request must also refer to the legislation and/or the provisions of this Guideline related to the point objected to.”

The Request Area is selected as “Tıbbi Cihaz Belge ve Ürün Kayıt İşlemleri” (Medical Device Document and Product Registration Transactions) and the Document Application Number is entered. Requests with no number entered or no reference to a provision are not taken into evaluation. The currency of registered certificates is also queried later:

“a) A 45-day revision procedure is applied to certificates determined not to be current.”

To have the document registration prepared on your behalf, see our ÜTS document registration service page.

For the steps before and after document registration, see our ÜTS registration guide; for the document requested in exports, our free sale certificate article; and for having the registrations carried out on your behalf, our ÜTS consultancy page.


9. Frequently Asked Questions

How many documents can be added to one document application?

According to Article 39 of the guideline, one document application contains at most 5 document notifications.

Is uploading instructions for use mandatory for a Class I device?

For Class-I Other, Is, Im and Ir devices, uploading instructions for use is optional. The Authority may request it when it considers it necessary.

How does a domestic manufacturer upload the declaration of conformity?

With the “İmalatçı Firmalar için e-imzalı Belge Başvurusu” type, in Turkish, uploading the original of the document e-signed by the person registered in ÜTS as the company’s “Mesul Müdür” (Responsible Manager) or “İmza Yetkilisi” (Signatory).

Do the originals of the documents need to be sent to the Authority by post?

No. According to Article 8 of the guideline, documents uploaded to ÜTS do not need to be sent physically to the Authority.

What is done if the rejection decision is wrong?

Before reapplying, re-evaluation of the decision is requested from the “Talep Bildir” screen by entering the Document Application Number and referring to the provision relating to the point objected to.

For the preparation and application of your ÜTS document registrations: Medical Device ÜTS Registration Consultancy

Sources

 
 

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara