top of page

Medical Device Accessory: Definition, Classification under Annex VIII and Accessory Registration in ÜTS

12 hours ago
6 min read
Tıbbi cihaz aksesuarı sınıflandırma ve ÜTS kaydı

SUMMARY

A medical device accessory is a part which, although not itself a medical device, is intended by its manufacturer to be used together with a particular medical device, and which enables that device to be used in accordance with its intended purpose or directly assists its medical functionality. The Tıbbi Cihaz Yönetmeliği (Medical Device Regulation) calls an accessory a “device”.

In this article we give the definition, the classification of an accessory under Annex VIII and the fields in accessory registration in ÜTS, with word-for-word quotations from the Tıbbi Cihaz Yönetmeliği and the TİTCK ÜTS Registration Guide TCKKD-KLVZ-03.

For the ÜTS product registration of your accessories: Medical Device ÜTS Registration Consultancy

Contents

1. An Accessory Is Also Counted as a “Device”

Paragraph two of Article 1 of the Tıbbi Cihaz Yönetmeliği:

“(2) For the purposes of this Regulation, medical devices, medical device accessories and the products listed in Annex XVI to which this Regulation applies shall hereinafter be referred to as “device”.”

The provisions written for “device” in the Regulation also apply to an accessory. The definition of “Device” in Article 4 of the ÜTS Registration Guide also covers medical device accessories and in vitro diagnostic device accessories.

2. Definition of a Medical Device Accessory

“(fff) Medical device accessory: a part which, although not itself a medical device, is intended by its manufacturer to be used together with one or more particular medical devices, in particular to enable the medical device(s) to be used in accordance with its/their intended purpose(s), or to directly and specifically assist the medical functionality of the medical device(s) with regard to its/their intended purpose(s),”

Elements of the definition:

  • The product is not itself a medical device.

  • The manufacturer intends the product to be used together with one or more particular medical devices.

  • The product enables that device to be used in accordance with its intended purpose, or directly and specifically assists its medical functionality.

To determine whether a product falls within the accessory definition, the Agency submits a request to the Commission, where necessary, under Article 4. For a short definition, see our page on what is a medical device accessory.

3. An Accessory Is Classified on Its Own

Part II of Annex VIII (implementing rules):

  • “3.1. The application of the classification rules shall be governed by the intended purpose of the devices.”

  • “3.2. If the device in question is intended to be used in combination with another device, the classification rules shall apply separately to each of the devices. Accessories for a medical device shall be classified in their own right separately from the device with which they are used.”

The class of an accessory is determined by applying the classification rules according to its own intended purpose, separately from the class of the device it is used with. The second paragraph of Article 52 of the ÜTS Registration Guide repeats the same rule. For the classification rules in general, see our article on MDR risk classes.

4. Software and Active Implantable Accessories

There is a separate rule for software:

“3.3. Software which drives a device or influences the use of a device shall fall within the same class as the device. If the software is independent of any other device, it shall be classified in its own right.”

One of the cases listed for implantable devices in Rule 8:

“- Active implantable devices or their accessories are classified as class III,”

For software, see our article on medical device software and Rule 11.

5. IVD Accessories

Article 52 of the ÜTS Registration Guide sets the same rule for IVD accessories:

“(8) Accessories for an IVD device are classified in their own right separately from the device with which they are used.”

For IVD classification, see our page on IVD device classification.

6. The Difference between an Accessory and a Spare Part

When listing the products registered in ÜTS, the ÜTS Registration Guide separates out the spare part:

“Only the medical devices and in vitro diagnostic devices that fall within the definition of “Device” as stated in Article 4 of this Guide and are covered by the Medical Device Regulations, and the parts defined as medical device accessories or in vitro diagnostic device accessories, are registered in ÜTS. Parts defined as spare parts are not registered in ÜTS.”

When a part is treated as a device is the subject of Article 23 of the Regulation; the details are in our article on spare part and component.

7. The “Bir Cihazın Bileşeni/Aksesuarı mı?” (Is It a Component/Accessory of a Device?) Field in ÜTS

Among the device registration fields under the MDR in Article 27 of the ÜTS Registration Guide:

  • “1) This field is mandatory to select in ÜTS.”

  • “2) This field is selected as “Evet” (Yes) if the device in question is an accessory of another medical device, or a part intended to replace an integral part or component of a device that significantly changes the performance or safety characteristics or the intended purpose of the device, and as “Hayır” (No) if it is not a component/accessory of another device.”

  • “3) If this field is selected as “Evet”, the field mentioned in point (ee) of this paragraph appears on the ÜTS registration screen. In this case, selecting a “Branş Türü Kodu” (Branch Type Code) in the field mentioned in point (ee) is mandatory.”

In the “Ana Cihazın Branş Türleri” (Branch Types of the Main Device) field, at least one branch type code of the main device is selected. The accessory is in ÜTS with its own device registration; for the other fields of the registration, see our article on ÜTS product registration.

8. The Instructions-for-Use Rule for Accessories

Article 17 of the ÜTS Registration Guide:

“(4) For Class IIa devices that are accessories of another device, if, during device registration, the field “Başka Bir Tıbbi Cihazın Bileşeni / Aksesuarı mı?” (Is It a Component / Accessory of Another Medical Device?) is selected as “Evet” (Yes) in device applications under the former Medical Device Regulations, or the field “Bir cihazın bileşeni/aksesuarı mı?” (Is It a Component/Accessory of a Device?) is selected as “Evet” in device applications under the MDR and IVDR, there is no obligation to upload instructions for use.”

“(5) For Class IIb and Class III devices under the MDR and MDD that are accessories of another device; for Class B, Class C, Class D, Self-Test Devices (Class B/C/D), Near-Patient Test Devices (Class B/C/D) and Supporting Diagnostic Devices (Class C/D) under the IVDR; and for Annex II List A and Annex II List B devices and Self-Test Devices under the IVDD; where the manufacturer of the main device is different from the accessory manufacturer;”

  • “(a) If there are instructions for use created by the manufacturer of the accessory, the device accessory's own instructions for use,”

  • “(b) If there are no instructions for use created by the manufacturer of the accessory, the instructions for use created by the manufacturer of the main device,”

  • “are uploaded, regardless of criteria such as differences in notified body and address.”

For the instructions for use document type, see our page on ÜTS document type: instructions for use.

9. Frequently Asked Questions

Does an accessory take the class of the main device?

No. Under point 3.2 of Annex VIII, accessories for a medical device are classified in their own right, separately from the device with which they are used.

What class is an accessory of an active implantable device?

Under Rule 8 of Annex VIII, active implantable devices or their accessories are classified as class III.

Is a spare part registered in ÜTS?

No. Under the ÜTS Registration Guide, parts defined as spare parts are not registered in ÜTS; parts defined as accessories are registered.

Are instructions for use uploaded for a Class IIa accessory?

If the “Bir cihazın bileşeni/aksesuarı mı?” (Is It a Component/Accessory of a Device?) field is selected as “Evet” (Yes) in the registration, there is no obligation to upload instructions for use for Class IIa accessories.

What is uploaded if the accessory has no instructions for use of its own?

For the classes in the fifth paragraph of Article 17 of the guide, and where the manufacturer of the main device is different, the instructions for use created by the manufacturer of the main device are uploaded.

For the ÜTS product registration of your accessories: Medical Device ÜTS Registration Consultancy

Sources

 
 

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara