Change of Notified Body and Derogation from Conformity Assessment Procedures: Articles 58, 59 and ÜTS Document Registration

SUMMARY
A change of notified body, under Article 58 of the Tıbbi Cihaz Yönetmeliği (Medical Device Regulation), is the situation in which a manufacturer terminates its contract with a notified body and enters into a contract with another notified body for the conformity assessment of the same device. The details of the transition are defined in an agreement between the manufacturer, the new notified body and, where applicable, the previous notified body.
This article gives, as direct quotations, Article 58, the exception to the conformity assessment procedures in Article 59, the related provisions of Articles 46 and 53, and their counterparts in the ÜTS Registration Guideline.
For the ÜTS document registration of your new EU certificate: Medical Device ÜTS Registration Consultancy
Contents
1. Art. 58: Voluntary Change of Notified Body
“(1) Where a manufacturer terminates its contract with a notified body and enters into a contract with another notified body in respect of the conformity assessment of the same device, the detailed arrangements for the change of notified body are clearly defined in an agreement between the manufacturer, the new notified body and, where applicable, the previous notified body. That agreement covers at least:”
“a) The date on which certificates issued by the previous notified body become invalid,”
“b) The date until which the identification number of the previous notified body may be indicated in the information supplied by the manufacturer, including any promotional material,”
“c) The transfer of documents, including confidentiality aspects and property rights,”
“ç) The date after which the conformity assessment tasks of the previous notified body are assigned to the new notified body,”
“d) The last serial number or lot number for which the previous notified body is responsible,”
The paragraph ends with the word “covers.” The parties to the agreement are the manufacturer and the new notified body; the previous notified body is a party “where applicable.”
2. Withdrawal of Old Certificates: Art. 58(2)
“(2) The previous notified body withdraws the certificates it issued for the device concerned on the date on which they become invalid.”
The invalidity date is determined in the agreement under subparagraph (a) of the first paragraph. Withdrawal and suspension of certificates are also regulated in Article 56; for details, see our article on certificate suspension and withdrawal.
3. Identification Number: CE Marking and Promotional Materials
Subparagraph (b) of Article 58 refers to the identification number of the previous notified body. Where the identification number appears is in Article 20, paragraph 5:
“(5) Where a notified body is responsible for the conformity assessment procedures referred to in Article 52, its identification number follows the CE marking. The identification number is also indicated on any promotional material which mentions that a device fulfils the requirements for CE marking.”
For the CE marking, see our article on the EU declaration of conformity and CE marking.
4. Application to the New Notified Body: Art. 53
“(1) Where the involvement of a notified body is required in the conformity assessment procedure, the manufacturer may apply to a notified body of its choice, provided that the body is designated for conformity assessment activities related to the relevant types of devices. The manufacturer cannot lodge an application in parallel with another notified body for the same conformity assessment procedure.”
“(3) When applying to a notified body under the first paragraph, the manufacturer declares whether it has withdrawn an earlier application to another notified body before that notified body’s decision, and provides information about any previous application for the same conformity assessment that was refused by another notified body.”
For the choice of procedure, see our article on the conformity assessment procedure.
5. If a Notified Body Ceases Its Activity: Art. 46(3)
If the change originates from the notified body and not from the manufacturer, the third paragraph of Article 46 applies:
“(3) Where a notified body decides to cease its conformity assessment activities, it informs the Agency and the manufacturers concerned as soon as possible and, in the case of a planned cessation, one year before ceasing its activities. The certificates may remain valid for a temporary period of nine months after cessation of the notified body’s activities, provided that another notified body has confirmed in writing that it will assume responsibilities for the devices covered by those certificates.”
“The new notified body completes a full assessment of the devices affected by the end of that period before issuing new certificates for those devices.”
6. New Certificate and ÜTS Document Registration
The EU certificate issued by the new notified body at the end of the change is registered in ÜTS as a document of the type “AB Sertifikası (MDR/IVDR)” (EU Certificate (MDR/IVDR)). Article 7, second paragraph of the TİTCK ÜTS Registration Guideline (TCKKD-KLVZ-03), among the fields checked in the document review:
“d) The name and identification number of the notified body,”
“e) The address of the notified body,”
If the new notified body is not defined in ÜTS, the seventh paragraph of Art. 7 applies:
“(7) If the notified body that issued the EU certificate is not defined in ÜTS as a notified body, before the ÜTS document registration procedures for the relevant EU certificate, a request is opened, using the “Talep Bildir” (Report Request) screen in ÜTS, in the “Onaylanmış/Uygunluk Değerlendirme Kuruluş İşlemleri” (Notified/Conformity Assessment Body Procedures) field for adding the notified body concerned to ÜTS or defining authority under the relevant legislation.”
Under Annex XII, Chapter I, Section 8 of the Regulation, a certificate that has been supplemented, amended or re-issued refers to the previous certificate and its date of issue. The steps of document registration are in our article on ÜTS document registration and on our ÜTS document registration service page.
7. Art. 59: Derogation from the Conformity Assessment Procedures
“(1) By way of derogation from Article 52, the Agency may, on a duly justified request, authorize the placing on the market or putting into service, within the national territory, of a specific device for which the procedures referred to in that Article have not been carried out, but the use of which is in the interest of public health or patient safety or health.”
“(2) Where such an authorization has not been granted for a single patient, the Agency informs the Commission and the EU Member States of its decision to authorize the placing on the market or putting into service of a device under the first paragraph.”
The elements of the paragraph:
The authorization is granted on a duly justified request.
The authorization is for a specific device.
The use of the device must be in the interest of public health or patient safety or health.
The authorization relates to placing on the market or putting into service within the national territory.
The provision says “may authorize”; the authorization is the Agency’s decision.
If the authorization is not granted for a single patient, the Agency notifies the Commission and the EU Member States of the decision.
8. Art. 59 Permission in the ÜTS Registration Guideline
Article 46, third paragraph, subparagraph (c) of TCKKD-KLVZ-03 regulates the extension application under announcement No. 2023/KK-1. The subparagraph covers the case where the manufacturer of devices under an EC certificate whose expiry date is before 20.03.2023 signed, after the expiry date, a contract with a notified body designated under the MDR. One of the documents submitted in this application is:
“3) The authorization document obtained from the Agency under the first paragraph of Article 59 of the MDR, or the document given by the Agency to the economic operator concerned under the first paragraph of Article 94 of the MDR, requesting the manufacturer to carry out the applicable conformity assessment procedure within the specified period”
According to the guideline, the application is made through the Agency’s Electronic Application System (EBS) with the document type “2023/KK-1 Sayılı Süre Uzatım Başvurusu” (Extension Application No. 2023/KK-1). For the transition timetable, see our article on the (EU) 2023/607 MDR transition timetable.
9. Frequently Asked Questions
Between whom is the agreement made in a change of notified body?
Under the first paragraph of Article 58, between the manufacturer, the new notified body and, where applicable, the previous notified body.
What does the agreement contain at a minimum?
The date on which the old certificates become invalid, the date until which the previous identification number may be indicated, the transfer of documents, the date after which tasks are assigned to the new body, and the last serial or lot number for which the previous body is responsible.
When are the old certificates withdrawn?
Under the second paragraph of Article 58, the previous notified body withdraws the certificates on the date on which they become invalid.
Can two notified bodies be applied to at the same time for the same device?
No. Under the first paragraph of Article 53, the manufacturer cannot apply in parallel to another notified body for the same conformity assessment procedure.
Can an Art. 59 authorization be obtained for every device?
Article 59 provides that the Agency may grant authorization for a specific device, on a duly justified request, and where the use of the device is in the interest of public health or patient safety or health.
For the ÜTS document registration of your new EU certificate: Medical Device ÜTS Registration Consultancy
Sources



