SİP Declaration (MDR Article 22): A New Document Type and the ÜTS Registration Flow
SUMMARY
A SİP declaration is the declaration prepared, under Article 22 of the Medical Device Regulation (Tıbbi Cihaz Yönetmeliği), by the natural or legal person who assembles CE-marked devices as a system or procedure pack (sistem veya işlem paketi, SİP) and places it on the market. In ÜTS this declaration is registered as a separate document type under the name “SİP Beyanı (MDR) (Madde-22)” (SIP Declaration (MDR) (Article 22)).
In this guide, the basis of the declaration, the three matters it must contain, when a SİP is considered a device in its own right, and the ÜTS document registration requirements for importers and domestic manufacturers (apostille, e-apostille, e-signature, Turkish translation) are explained with the text of Articles 14, 15 and 16 of the Guideline on the Registration Processes of Medical Devices to the Product Tracking System (Tıbbi Cihazların Ürün Takip Sistemine Kayıt Süreçlerine İlişkin Kılavuz, TCKKD-KLVZ-03).
For the ÜTS document registration of your SİP declaration and the product registration of the SİP: Medical Device ÜTS Registration Consultancy
Contents
1. What Is a SİP Declaration and Who Prepares It?
The basis is Article 22 of the Medical Device Regulation. First paragraph:
“Natural or legal persons prepare a declaration if they assemble devices bearing the CE mark with the following other devices or products, in line with the intended purpose of the devices or other products and within the limits of use set by their manufacturers, in order to place them on the market as a system or procedure pack: a) Other devices bearing the CE mark. b) In vitro diagnostic devices bearing the CE mark in accordance with the In Vitro Diagnostic Medical Device Regulation. c) Other products that comply with the legislation applicable to them, provided that their use within a medical procedure or their presence in the system or procedure pack is separately justified.”
Article 14 of the Guideline matches this declaration to the document type in ÜTS and calls the person who prepares the declaration the “SİP manufacturer” (SİP imalatçısı). The beginning of the first paragraph:
““SİP Declaration (MDR) (Article 22)” document is the declaration prepared by natural or legal persons defined as SİP manufacturers when they assemble, together with CE-marked devices within the scope of the MDR, … in order to place them on the market as a SİP.”
2. The Three Matters the Declaration Must Contain
Under the second paragraph of Article 14 of the Guideline, the SİP manufacturer declares the following in the declaration:
“That it has verified the mutual compatibility of the devices and, where applicable, other products in accordance with the manufacturers’ instructions and has carried out its activity in accordance with these instructions,”
“That it has packaged the system or procedure pack and has provided the relevant information to users, including that supplied by the manufacturers of the devices or other products assembled,”
“That the activity of assembling the devices and, where applicable, other products as a system or procedure pack has been subjected to appropriate methods of internal monitoring, verification and validation,”
The same three matters appear in the same order in the second paragraph of Article 22 of the Medical Device Regulation. If any of these three statements is missing from the declaration, the document is not a SİP declaration as defined by the Guideline.

3. The Manufacturer Who Sterilizes the SİP
If the SİP manufacturer also sterilizes the pack before placing it on the market, a notified body gets involved. Third paragraph of Article 14 of the Guideline:
“If the SİP manufacturer also sterilizes the SİP pack before placing it on the market, independently of the individual sterility of the products in the SİP, it applies one of the conformity assessment procedures referred to in the ninth paragraph of Article 61 of this Guideline. The application of that procedure and the involvement of the notified body are limited to the aspects of the procedure relating to ensuring sterility until the sterile pack is opened or damaged. The SİP manufacturer states in the declaration that the sterilization was carried out in line with the manufacturer’s instructions.”
4. When Is a SİP Considered a Device in Its Own Right?
In three cases the SİP declaration route closes and the pack becomes a device in its own right. Fourth paragraph of Article 14 of the Guideline:
“Where the SİP contains devices that do not bear the CE mark, or the selected combination of devices is not compatible in view of the devices’ original intended purposes, or sterilization has not been carried out in accordance with the manufacturer’s instructions, the SİP is considered a device in its own right and is subject to the appropriate one of the conformity assessment procedures referred to in Article 52 of the MDR and Article 61 of this Guideline (excluding the ninth paragraph). In this case, the SİP manufacturer assumes the obligations incumbent on manufacturers.”
In this case, the document to be uploaded to ÜTS is not a SİP declaration but the device’s own declaration of conformity and, if any, its EU certificate. For the declaration of conformity, see our page on preparing MDR and IVDR declarations of conformity (MDR ve IVDR uygunluk beyanı hazırlama).
5. Marks and Information on the SİP
Fifth paragraph of Article 14 of the Guideline:
“The SİP does not bear an additional CE mark; however, it bears the name of the person/company, its registered trade name or registered trademark, together with an address at which the SİP manufacturer can be reached. In addition, the SİP is accompanied by the information referred to in point 23 of Annex I of the MDR.”
The retention of the declaration is regulated in the fifth paragraph of Article 22 of the Medical Device Regulation:
“The declaration referred to in the second paragraph is kept, after the system or procedure pack is assembled, to be submitted to the Agency (Kurum), for the period applicable to the assembled devices under the eighth paragraph of Article 10. Where these periods differ, the longest period applies.”
6. Importer’s SİP Declaration Document Registration: Original Document
The importer registers the declaration of a foreign SİP manufacturer in ÜTS. Under the first paragraph of Article 15 of the Guideline, one of four options is uploaded to the “Orijinal Doküman” (Original Document) field:
Apostille-certified document:
Document certified by a Republic of Türkiye embassy/consulate:
Original of an e-apostille-certified document:
Original of the SİP manufacturer’s e-signed document:
A notarized copy is not required for apostille-certified and consular-certified documents. Item 2 of subparagraph (a):
“The original of the apostille-certified document must be uploaded to ÜTS, and it is not necessary to upload a copy of this document issued by a Turkish notary or by a notary of another country.”
Uploading the original is mandatory for e-apostille and e-signed documents. Item 3 of subparagraph (c):
“E-apostille-certified documents whose e-signature cannot be verified and/or which have an invalid e-signature, because the original was not uploaded or for other reasons, are not accepted.”
For details on apostilles and e-signatures, see our article on the medical device apostille guide (tıbbi cihaz apostil rehberi).
7. Importer’s SİP Declaration Document Registration: Turkish Document and Other Requirements
Second paragraph of Article 15 of the Guideline:
““Türkçe Doküman” (Turkish Document) field: the complete Turkish translation of the document uploaded to the “Orijinal Doküman” field, made by a sworn translator, is uploaded.”
Under the same paragraph, only the Turkish part of the document certified by a sworn translator is uploaded to this field; the document contains the translator’s name and surname, stamp/signature/seal, and the translator’s statement that the translation is faithful to the original. Other requirements:
It is preferred that the uploaded documents are in a searchable format (third paragraph).
Documents do not need to be sent physically to the Agency (Kurum); a document registration application through ÜTS is sufficient (fourth paragraph).
A maximum of 5 document registration notifications is allowed in one document application (fifth paragraph).
8. Domestic Manufacturer’s SİP Declaration Document Registration
A domestic SİP manufacturer registers its own declaration with an e-signature. The conditions in the first paragraph of Article 16 of the Guideline:
“It is mandatory to apply by selecting “İmalatçı Firmalar için e-imzalı Belge Başvurusu” (e-signed Document Application for Manufacturer Firms) as the Document Application Type (Belge Başvuru Tipi).”
“The option “Belge kapsamındaki ürünlerin üreticisi firması siz misiniz?” (Are you the manufacturer of the products covered by the document?) is selected as “Evet” (Yes).”
“Documents whose original language is Turkish are accepted.”
The option “Orijinal Doküman Türkçe mi?” (Is the Original Document Turkish?) is set to “Evet” (Yes), and the original of the document is uploaded e-signed by the person registered in ÜTS on behalf of the firm as “Mesul Müdür” (Responsible Manager) or “İmza Yetkilisi” (Authorized Signatory). Item 2 of subparagraph (ç):
“If the name and surname of the signing official are written in the original of the document, the name and surname of the official on the document must match the name and surname of the official registered as “Mesul Müdür” or “İmza Yetkilisi” who electronically signs the document.”
Under the same article, the e-signed document is checked automatically by the system, and the document does not need to be sent physically to the Agency (Kurum).
9. After Document Registration: Product Registration of the SİP
Document registration of the SİP declaration is a prerequisite for the ÜTS product registration of the SİP; in the product registration, the declaration registered under this document type must be selected. For the product registration steps, kit and set preparation and barcode allocation to the SİP, see our guide SİP: kit and set preparation, SİP declaration and SİP registration in ÜTS, for the general flow of document registration, our guide ÜTS document registration, and for the whole registration, our ÜTS consultancy page.
10. Pre-Application Checklist
Are the three matters in the second paragraph of Article 14 (mutual compatibility, packaging and provision of information, internal monitoring/verification/validation) clearly written in the declaration?
Is there a device in the pack without a CE mark; is the device combination compatible with the original intended purposes?
If the pack is also sterilized, are there a sterilization declaration and a notified body certificate?
If you are an importer: is the original of the document uploaded by which option (apostille, consular certification, e-apostille or e-signature)?
Was only the Turkish part of the sworn translation uploaded, with the translator’s statement and stamp?
If you are a domestic manufacturer: is the person who e-signs the document registered in ÜTS as Responsible Manager (Mesul Müdür) or Authorized Signatory (İmza Yetkilisi), and is the name the same as on the document?
11. Frequently Asked Questions
Who prepares the SİP declaration?
The natural or legal person who assembles CE-marked devices in order to place them on the market as a system or procedure pack; the Guideline calls this person the SİP manufacturer (TCKKD-KLVZ-03 Article 14, Medical Device Regulation Article 22).
Is an additional CE mark affixed to the SİP?
No. The SİP does not bear an additional CE mark; it bears the SİP manufacturer’s name, registered trade name or trademark, and address.
What happens if there is a product without a CE mark in the pack?
The SİP is considered a device in its own right, is subject to the conformity assessment procedure in Article 52 of the MDR, and the SİP manufacturer assumes the manufacturer’s obligations.
How does an importer upload the declaration of a foreign SİP manufacturer?
The original of the apostille-certified, consular-certified, e-apostille-certified or e-signed document is uploaded to the Orijinal Doküman (Original Document) field, and the Turkish part of the sworn translation to the Türkçe Doküman (Turkish Document) field. A notarized copy is not required.
Who signs the domestic manufacturer’s SİP declaration?
The person registered in ÜTS on behalf of the firm as Responsible Manager (Mesul Müdür) or Authorized Signatory (İmza Yetkilisi) e-signs it; the application type becomes “İmalatçı Firmalar için e-imzalı Belge Başvurusu” (e-signed Document Application for Manufacturer Firms) and the document is prepared in Turkish.
How many SİP declarations can be added to one document application?
Under the fifth paragraph of Article 15 of the Guideline, a maximum of 5 document registration notifications is allowed in one document application.
12. Related Guides
SİP: kit and set preparation, SİP declaration and SİP registration in ÜTS
ÜTS document registration: document types and application types
Medical device apostille guide: apostille, e-signature and notary requirement
Manufacturer declaration of conformity and ÜTS document registration
MDR and IVDR declaration of conformity preparation consultancy
For the ÜTS document registration of your SİP declaration and the product registration of the SİP: Medical Device ÜTS Registration Consultancy



