top of page

Authorizing a Consultant in ÜTS

You have decided to have your ÜTS registration done by an outside consultant and you have come across this question: "Open an authorization for us" is what you are told, but what exactly is this authorization and what happens when you give it? Do they want your e-signature, your password, or something else

Authorizing a Consultant in ÜTS: User Types and Limits

You have decided to have your ÜTS registration done by an outside consultant and you have come across this question: "Open an authorization for us" is what you are told, but what exactly is this authorization and what happens when you give it? Do they want your e-signature, your password, or something else?

This page explains what a user authorization in ÜTS is, the difference between the "Medical Device Registration Officer" and the authorized signatory, and how authorization is opened and closed. Every rule described rests on the Guide on Registration Processes of Medical Devices to the Product Tracking System, the Medical Device Regulation or the Regulation on Sales, Advertising and Promotion of Medical Devices. Where the Guide does not describe a screen step, we say so explicitly; we do not write speculative steps.

What Is an ÜTS User Authorization and How Is It Managed From the Company Page?

The people who perform operations in ÜTS are users defined by the company itself. The system is built as users defined under the company and authorized signatories defined under the company.

Who is responsible for this list is shown by the sixth paragraph of Article 5 of the Guide: in company transfer and merger operations, the authorized signatories and users defined in ÜTS must be updated for the company's ÜTS activities to continue. That is, the authorized signatories and users defined in ÜTS are information held on the company's side and to be updated by the company.

A consultancy relationship fits into this structure: the consultant works as a user defined in the company's ÜTS account. The company's account, the company's documents and the company's applications stay where they are; the consultant performs only the operations that the user type defined for them can perform. "Authorizing a consultant" is therefore not sharing a password or handing over the e-signature.

One point needs to be stated as it is: the Guide does not describe the user definition and user deletion screens step by step. The only direct provision in the Guide is the sixth paragraph of Article 5. The operation authority of user types is defined in Articles 39 and 40. In the sections below we give what these two sources say separately.

What Can the "Medical Device Registration Officer" User Type Do?

The Guide mentions the name of a user type in only three places, and in all three it ties the same operation to it: approving the application.

The eleventh paragraph of Article 39 of the Guide says this for document applications: if all the documents that should be in the relevant application are in the list in the "Documents to Be Added to the Application" area, the "Create Application" button is pressed and the "Approve" action is taken on the "Document Application Summary" screen that appears; only users of the "Medical Device Registration Officer" type of the relevant company can perform this action.

Sub-item (f) of the fifth paragraph of Article 40 of the Guide makes the same statement for device applications: if all the devices to be applied for are in the list in the "Products to Be Applied For" area, the "Approve" action is taken on the "Medical Device Application Summary" screen, and only users of the "Medical Device Registration Officer" type of the relevant company can perform this action. Sub-item (c) of the sixth paragraph of the same article repeats the provision for custom-made medical device and system procedure pack applications.

The conclusion is this: this is the user type that creates and approves the application. The authorization opened to the consultant is exactly this. Filling in the registration screens, uploading documents, building the document combination suited to the device class and creating and approving the application are the jobs that run with this authorization.

Who Is the Authorized Signatory, and What Do They Sign?

An approved application does not go to the Agency yet. Under the twelfth paragraph of Article 39 of the Guide, if there is nothing contrary to procedure and business rules in the notifications of the application, the application is created in "Awaiting Signature" status.

The thirteenth paragraph gives the continuation: the application in "Awaiting Signature" status is signed electronically by the applicant authorized signatory of the company. Among the signed applications, those containing document types mentioned in Articles 6, 7, 10, 11 and 14 of the Guide move to "Awaiting Payment" status; those outside these document types move to "Under Review" status as soon as they are signed.

For device applications the order is a little different. Under sub-item (g) of the fifth paragraph of Article 40 of the Guide, for the application to go to the Agency in "Under Review" status, it must first be signed electronically by the company's authorized signatory and brought to "Awaiting Payment" status, and then, once the application fee is paid, it moves to "Under Review" status.

The separation of the two roles thus becomes clear: the registration officer prepares and approves the application, and the authorized signatory sends the application to the Agency with their e-signature.

Documents for Which the Responsible Manager / Authorized Signatory E-Signature Is Mandatory

For some document types the e-signature is needed not only to send the application but to create the document itself.

  • Domestic manufacturer declaration of conformity: sub-item (ç) of the first paragraph of Article 13 of the Guide says that the original of the document signed electronically by the person registered on behalf of the company as "Responsible Manager" or "Authorized Signatory" is uploaded to the "Original Document" field.

  • Domestic manufacturer SİP declaration: sub-item (ç) of the first paragraph of Article 16 of the Guide repeats the same condition for the SİP declaration.

  • Annex-21 undertaking: sub-item (a) of the second paragraph of Article 9 of the Guide says that, for domestic manufacturers that have a certificate from a foreign notified body, the original of the undertaking in Annex-21, signed with an e-signature by the person registered in ÜTS as "Responsible Manager" or "Authorized Signatory", is uploaded together with a copy of the certificate.

For these documents the e-signature is not optional. The first sub-item of sub-item (ç) of the first paragraph of Article 13 of the Guide expresses this at system level: ÜTS allows a document application to be made only if the document is signed electronically by the "Responsible Manager" or "Authorized Signatory".

The Name in the Document and the Name of the E-Signature Holder Must Match

The Guide adds a name match to the e-signature check. The second sub-item of sub-item (a) of the second paragraph of Article 9, the second sub-item of sub-item (ç) of the first paragraph of Article 13 and the second sub-item of sub-item (ç) of the first paragraph of Article 16 make the same statement: if the name and surname of the authorized person who signed appear in writing in the original of the document, the name and surname of the authorized person in the document must match the name and surname of the authorized person registered as "Responsible Manager" or "Authorized Signatory" who signs the document electronically.

In practice this provision comes into play for companies that try to prepare a document in one manager's name and send it with another manager's e-signature. The name in the document text and the person who applies the signature must be the same; otherwise the system does not let the application through.

Authority Can Be Delegated, Responsibility Cannot

Opening a user authorization does not mean handing over responsibility for the accuracy of the data. The fourth paragraph of Article 31 of the Regulation on Sales, Advertising and Promotion of Medical Devices says that the Agency issues guides on the registration of devices in the record and information management system, and that sales centers set up the infrastructure in line with these guides within the stated periods and register the devices in the system. The last sentence of the paragraph addresses responsibility: the accuracy of the information on devices registered in the system is the responsibility of the sales center that made the product registration.

This also determines the shape of the consultancy relationship. The consultant creates the records, but the data in the system stands as the company's declaration. In a sound setup, therefore, the company can see all records from its own ÜTS account; which field was entered with what, which document was linked to which device and under which number which application went are reported in a way the company can follow.

Steps for Opening the Authorization and Checks Afterwards

Here it is necessary to separate what the source says from what it does not say.

What the Guide says is as follows: the authorized signatories and users defined in ÜTS are information the company must update (sixth paragraph of Article 5). Only users of the "Medical Device Registration Officer" type can take the "Approve" action in a document application (eleventh paragraph of Article 39). The same rule applies in a device application (sub-item (f) of the fifth paragraph and sub-item (c) of the sixth paragraph of Article 40). The application in "Awaiting Signature" status is signed electronically by the applicant authorized signatory of the company (thirteenth paragraph of Article 39 and sub-item (g) of the fifth paragraph of Article 40).

What the Guide does not say is equally important: the Guide does not describe from which menu, on which screen and with which button a user is defined in ÜTS. The names of the screens for adding a user, selecting the user type, and deactivating or deleting a user do not appear in the Guide. For the current screen flow of these steps, one must look at the user management section of the ÜTS application itself and at the announcements published by the Agency. The order below is the logical work order derived from the roles defined in the Guide; it contains no screen name claims.

  • Step 1 — Verify that the company registration is complete: under Article 5 of the Guide, company registration is made from MERSİS or VEDOP sources. For companies registering as "Manufacturer/Importer/Dealer/Exporter", under the fifth paragraph of the same article, the ÇKYS number must have been entered. A user cannot be defined under a company without a company registration.

  • Step 2 — Verify the authorized signatory list: check that the person who will sign the application is defined in ÜTS as an authorized signatory and that their e-signature is usable. If domestic manufacturer documents are involved, this person must be registered as "Responsible Manager" or "Authorized Signatory".

  • Step 3 — Get the consultant's identity details: a user definition is person-based. You open the authorization not to a company but to the person who will actually carry out the work at that company. The name, surname and T.C. ID number of this person are the minimum information needed for the definition.

  • Step 4 — Select the user type as "Medical Device Registration Officer": creating and approving applications is tied in the Guide only to this user type. This is the type the consultant needs in order to do the job.

  • Step 5 — Do not open signing authority: since the Guide ties the e-signature step to the company's authorized signatory, defining the consultant as an authorized signatory would go outside the model.

  • Step 6 — Test access: the first check after the authorization is opened is which screens the consultant sees and which applications they can create. Whether the document and device application creation screens open can be seen at menu level without creating a test application.

  • Step 7 — Follow the chain end to end on the first application: on the first application, follow whether the "Awaiting Signature" status is created, whether the authorized signatory can sign, and whether the status progresses to "Awaiting Payment" or "Under Review". Seeing these three statuses in sequence is the most concrete proof that the authorization is set up correctly.

Closing the Authorization and Updating Users When Staff Leave

Closing an authorization is the company's job as much as opening it. The sixth paragraph of Article 5 of the Guide ties keeping the authorized signatories and users defined in ÜTS up to date to the continuation of the company's ÜTS activities. Failing to keep the list up to date creates a two-way risk: the access of a person who has left may stay open, or applications get stuck in "Awaiting Signature" status because the authorized signatory list is out of date.

Here too the limit of the source must be stated: the Guide does not describe from which screen a user will be deactivated or deleted. The obligation in the Guide is to keep the list up to date. The order that works in practice is this: when the service ends or a staff member leaves, the user record is updated without delay; if the authorized signatory has changed, the new authorized person is defined and the old one is removed from the list; if there is an application still in progress after the closing, it is checked in which status it remained.

There is a point not to be skipped when ending a consultancy relationship: when the registration officer authorization is closed, creating and approving new applications also closes. If there are files in progress, it is necessary to clarify, before closing the authorization, at what stage they are and who will take them over.

Re-Establishing Authorizations in a Company Transfer or Merger

The sixth paragraph of Article 5 of the Guide regulates exactly this case: in company transfer and merger operations, the authorized signatories and users defined in ÜTS must be updated for the company's ÜTS activities to continue.

In transfers and mergers the signature circular changes, the authorized persons change, and often the team doing the registration work changes too. If these changes are not reflected in ÜTS, the authorized signatory defined in the system becomes a person who no longer represents the company, and applications cannot be signed.

The seventh paragraph of the same article defines a convenience, but its scope is limited: where the responsible manager, title and address of the company change, if the relevant information is updated in ÇKYS, these changes are updated automatically in ÜTS. This automatic update is for responsible manager, title and address information; the Guide contains no provision stating that it covers the user and authorized signatory list.

EU Authorized Representative Is Not the Same as an ÜTS User Authorization

These two are often confused because they are named with similar words in Turkish, yet they are entirely different concepts.

An EU authorized representative, under the definition in Article 4 of the Guide, is the natural or legal person established in Türkiye or EU member states who is appointed in writing by the manufacturer to carry out on its behalf certain obligations under the Medical Device Regulations when the manufacturer is not established in Türkiye or EU member states. The first paragraph of Article 11 of the Medical Device Regulation says that if the manufacturer is not established in Türkiye or EU member states, the device can be placed on the market only if the manufacturer appoints an authorized representative. Under the second paragraph of the same article, the appointment becomes valid when a mandate is issued and accepted in writing by the authorized representative.

An ÜTS user authorization is none of these. As defined in the eleventh paragraph of Article 39 of the Guide, it is the authority to carry out a certain operation (approving the application) within the system. It does not establish a representation relationship at the legislative level and does not create manufacturer obligations.

Obligations a Manufacturer Cannot Transfer to an Authorized Representative

Even in an authorized representative relationship, transfer is not unlimited. The fourth paragraph of Article 11 of the Medical Device Regulation says that, within the scope of the mandate, the manufacturer cannot transfer its obligations set out in the first, second, third, fourth, sixth, seventh, ninth, tenth, eleventh and twelfth paragraphs of Article 10.

The tasks to be performed by the authorized representative are listed in the third paragraph of the same article: verifying that the declaration of conformity and the technical documentation have been prepared, keeping copies of these documents to be submitted to the Agency, complying with the registration obligations, providing information and documents to the Agency on request in Turkish or in an EU official language the Agency deems appropriate, forwarding sample requests to the manufacturer, cooperating with the competent authorities in corrective and preventive actions, informing the manufacturer promptly of complaints and reports, and terminating the mandate if the manufacturer acts contrary to the Regulation.

Joint and Several Liability of the Authorized Representative

The fifth paragraph of Article 11 of the Medical Device Regulation defines a heavy consequence: without prejudice to the fourth paragraph, if the manufacturer does not comply with the obligations in Article 10, the authorized representative is legally jointly and severally liable for defective devices on the same basis as the manufacturer.

This shows that acting as an authorized representative is an obligation that cannot be compared with being a user in ÜTS. The sixth paragraph of the same article requires an authorized representative who terminates the mandate on the grounds in sub-item (g) of the third paragraph to promptly notify the Agency and, if any, the notified body of the termination and its reasons.

An Authorized Distributorship Certificate Does Not Mean Granting Authority

A third confusion of concepts is here. Under the definition in Article 4 of the Guide and the first paragraph of Article 23, the Authorized Distributorship Certificate is a document issued by the manufacturer of the device on behalf of importer companies operating in our country, declaring that the importer company concerned is authorized in Türkiye for the devices within the scope of the document.

This document shows the commercial authorization between the manufacturer and the importer; it does not give a user an operation authority within ÜTS. It is also not mandatory: the ninth paragraph of Article 23 of the Guide says that uploading the Authorized Distributorship Certificate to ÜTS is not a mandatory document but an optional one, and that even if the record of this document falls into rejected status for any reason, the devices linked to the relevant document will continue to remain in registered status.

Training Requirement and Sanction for the Person Registering in ÜTS

There is one more condition the person you authorize must meet. The tenth paragraph of Article 26 of the Regulation on Sales, Advertising and Promotion of Medical Devices says that persons who carry out medical device registration operations in the Agency's record and information management system on behalf of the sales center must successfully complete the training determined by the Agency.

The second paragraph of Article 28/A of the same Regulation defines the sanction: if it is determined that operations have been repeatedly carried out in the Agency's record and information management systems contrary to the procedures and principles determined by the Agency, the trainings these persons received under the tenth paragraph of Article 26 are cancelled.

Asking the person you will authorize about this condition is a reasonable check. Having registration work done by a person who has not completed the training carries both a risk of violating the Regulation and a risk of interruption in the middle of the process.

If a False Document Is Submitted, System Access May Be Restricted

The heaviest risk of authorization is here. The first paragraph of Article 28/A of the Regulation on Sales, Advertising and Promotion of Medical Devices says that if the Agency determines that applications have been made to the record and information management systems with false information and documents, it may restrict the access of the persons or organizations carrying out these operations to the relevant record and information management systems.

There is a parallel consequence on the document side. Sub-item (b) of the eighteenth paragraph of Article 39 of the Guide says that documents determined to be forged or tampered with are rejected, and that after the rejection the PGD process is also started so that the necessary actions can be taken.

Read together, these two provisions show why selectivity matters in authorization: the document submitted by the person acting on your company's behalf in the system is your company's declaration.

What to Record When Granting Authorization

The following are not provisions in the Guide; they are a recommendation from practice. Putting these headings in writing before opening the authorization prevents most of the disputes that come up later.

  • Service scope: which company, which documents and which product group will be registered.

  • User type opened: that the authorization is opened as "Medical Device Registration Officer" and that no signing authority is given.

  • Owner of the signature step: the name of the person who will e-sign the applications and who their backup is.

  • Reporting arrangement: how often, over which application numbers and with which status information reports will be given.

  • Responsibility for requests and objections: who will write the request texts, bearing in mind that, under the sixteenth paragraph of Article 39 of the Guide, requests that do not refer to the legislation are not taken into assessment.

  • Time of closing the authorization: when and by whom the user record will be updated when the service ends.

Can a Consultant E-Sign on Behalf of the Company?

No. The thirteenth paragraph of Article 39 of the Guide says that the application in "Awaiting Signature" status is signed electronically by the applicant authorized signatory of the company. For device applications too, sub-item (g) of the fifth paragraph of Article 40 requires the application to be signed electronically by the company's authorized signatory.

For domestic manufacturer documents this is even stricter: under the first sub-item of sub-item (ç) of the first paragraph of Article 13 of the Guide, ÜTS allows a document application only if the document is signed electronically by the "Responsible Manager" or "Authorized Signatory"; the name-match condition in Articles 9, 13 and 16 also ties the signature to the person.

The right model is this: the consultant prepares and approves, and the company's authorized signatory signs. The e-signature staying with the company is not a restriction; it is the very structure that keeps the process under the company's control.

You can find the whole of the registration job and the option of proceeding with your own team on our Having ÜTS Registration Done page, the steps of company registration on our ÜTS Company Registration page, and the process specific to imported devices on our Imported Medical Device ÜTS Registration page. For the service side of the authorization setup, you can look at our ÜTS Registration Officer Authorization and Authorized Representative Service pages.

ÜTS Registration

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara