top of page

Person Responsible for Regulatory Compliance (PRRC) Service: For ÜTS-Registered Manufacturers

A permanent and continuous regulatory compliance officer service; ÜTS registration, technical file and reporting obligations.

Person Responsible for Regulatory Compliance (PRRC) Service: For ÜTS-Registered Manufacturers

Person Responsible for Regulatory Compliance for Medical Device Manufacturers

We provide the person responsible for regulatory compliance (PRRC) as a permanent and continuous service to manufacturers within the scope of Medical Device Regulation Art. 15/2. The job description is set out in writing on the basis of the four responsibilities in Art. 15/3; technical documentation, the EU declaration of conformity, post-market surveillance and adverse event reporting are within this definition. To start, send the document showing your company's SME status, your device list and your quality management system documents; you can use our price quote form.

Who it is for

  • Medical device manufacturers established in Türkiye at micro or small enterprise scale.
  • In vitro diagnostic device manufacturers established in Türkiye at micro or small enterprise scale (IVD Regulation Art. 16/2 contains the same provision).
  • Domestic manufacturers who will place on the market for the first time and have no employee with the qualification in Art. 15/1.
  • Manufacturers whose person responsible for regulatory compliance has left and who are looking for a permanent service to replace them.

We do not provide this service to manufacturers established in EU member states. Medex is established in Türkiye; the person responsible for regulatory compliance of a manufacturer within the EU is expected to be within the EU as well.

Legal basis

The exception for micro and small enterprises and the obligation to obtain the service are in the same paragraph:

"Micro and small enterprises within the scope of the Regulation on the Definition, Characteristics and Classification of Small and Medium-Sized Enterprises, put into force by Council of Ministers Decision No. 2005/9617 dated 19/10/2005, are not required to have the person responsible for regulatory compliance within their organization; however, such enterprises shall have the services of such a person at their disposal permanently and continuously, in a manner consistent with the procedures and principles determined by the Agency." (Medical Device Regulation Art. 15/2)

The minimum responsibilities of the person responsible for regulatory compliance:

"The person responsible for regulatory compliance shall be responsible at least for ensuring that: a) the conformity of the devices is appropriately checked, in accordance with the quality management system under which the devices are manufactured, before a device is released, b) the technical documentation and the EU declaration of conformity are drawn up and kept up-to-date, c) the post-market surveillance obligations are complied with in accordance with paragraph ten of Article 10, ç) the reporting obligations referred to in Articles 85 to 88 and in the measures adopted by the Commission are fulfilled, d) in the case of investigational devices, the statement referred to in point 4.1 of Section II of Annex XV is issued." (Medical Device Regulation Art. 15/3)

If responsibility is shared among more than one person, it is separated in writing:

"If several persons are jointly responsible for regulatory compliance in accordance with paragraphs one, two and three, their respective areas of responsibility shall be stipulated in writing." (Medical Device Regulation Art. 15/4)

For in vitro diagnostic device manufacturers, IVD Regulation Art. 16/2 contains the same provision; for these manufacturers the job description is written according to the articles of the IVD Regulation, and the reporting and surveillance subparagraphs according to the relevant articles of that regulation.

The details of the person responsible for regulatory compliance are among the information provided in the economic operator registration:

"The name, address and contact details of the person or persons responsible for regulatory compliance referred to in Article 15." (Medical Device Regulation Annex VI Part A 1.4)

We take the phrase "procedures and principles determined by the Agency" in Art. 15/2 as it is into the contract; the scope of the service is updated according to the procedures and principles the Agency determines. For the general framework of the subject, see our glossary entry on who the person responsible for regulatory compliance is.

What we do as the person responsible for regulatory compliance

For each subparagraph in Art. 15/3, we record in the written job description how we meet the requirement of that subparagraph:

  • Pre-release check: we check the release records defined in your quality management system before the device goes on the market; we do not give release approval with incomplete records.
  • Technical documentation and EU declaration of conformity: we follow that the technical file is up to date according to the headings of Annex II and Annex III, that the declaration of conformity carries the Annex IV fields, and that it is updated with every change.
  • Post-market surveillance: we check that the surveillance plan is implemented under Art. 10/10 and Art. 81, and that the PMS report or PSUR is updated according to your class.
  • Adverse event and field safety corrective action reporting: we set up your internal procedure so that the reports in Art. 85 to 88 are prepared and submitted on time, and we prepare the notification file together with you.
  • Investigational devices: if an investigational device is involved, we follow the issuing of the statement in Annex XV Section II 4.1.

The details of the responsible person are entered in your economic operator registration. If an EUDAMED actor registration is needed, we carry out this step together under EUDAMED registration consultancy.

What permanent and continuous service means

Art. 15/2 requires the service to be permanent and continuous. For this reason we set up the service not as a one-off consultancy job but as a duty that continues for the duration of the contract. The responsible person is defined by name in your quality management system, appears in your release and reporting procedures as the person with signature and approval authority, and every new device, every technical file revision and every adverse event information is passed to them.

In practice this means: when you plan a new model, a new label, a new packaging or a new ÜTS product registration, the process does not bypass the responsible person. A change record is opened, the responsible person assesses its effect on the technical file and the declaration of conformity, and the device is not released until the necessary updates are completed. When a complaint or adverse event information arrives, whether the event is a serious adverse event to be reported under Art. 85 is assessed together with the responsible person.

If the responsible person changes, the new person's details are entered in your economic operator registration, your quality manual and the relevant procedures; the job description is signed again in the new person's name.

Micro and small enterprise status

The exception in Art. 15/2 depends on the enterprise being a micro or small enterprise under the SME Regulation put into force by Council of Ministers Decision No. 2005/9617. The relevant regulation determines the limits of the status; before we start, we ask for the document showing your company's status and place it in the file. If your status moves up to a medium or large enterprise, under Art. 15/1 the responsible person must be within your organization; in that case we close the service with a plan to hand over to a person within your organization.

The relationship between the person responsible for regulatory compliance and ÜTS registration work

The person responsible for regulatory compliance is responsible for keeping up to date the documents on which your ÜTS document and product records rest: the declaration of conformity, the technical documentation, the label and the instructions for use. The ÜTS registration itself is a separate job and runs under Medical Device ÜTS Registration Consultancy. When you take the two services together, every document going to ÜTS has passed through the responsible person's check, and differences in name, brand and model between the declaration of conformity and the ÜTS record are caught before registration.

For a more detailed account of the obligations of the person responsible for regulatory compliance, see our article on Art. 15.

Qualification

The person we assign holds one of the qualification conditions in Art. 15/1: a relevant higher education diploma together with professional experience in medical device regulation or quality management systems, or the professional experience route alone. The diploma and experience documents showing the qualification are given to you as an annex to the contract; they stay in your file to be presented upon the Agency's request.

Under Art. 15/5, the person responsible for regulatory compliance is not subjected to any disadvantage for performing their duties, even if they are not an employee of your organization. This provision is included in the contract.

The boundary between the manufacturer's responsibility and the responsible person's duty

The person responsible for regulatory compliance ensures that the work listed in Art. 15/3 is done; they do not take the manufacturer's place. The manufacturer draws up and signs the EU declaration of conformity, the manufacturer makes the design and production decisions of the device, and the manufacturer operates the quality management system. The responsible person checks whether this work is carried out in accordance with the legislation, notifies in writing when they see a deficiency, and does not give release approval until the deficiency is remedied.

We write this boundary clearly in the job description; so that, in a request from the Agency, which record is with whom and who made which decision can be shown by document.

Process

  • You send the document showing your SME status, your device list and your quality management system documents.
  • We review that your enterprise falls within Art. 15/2, the class of your devices and the state of the existing technical file.
  • We put the job description and the sharing of responsibility into writing for each subparagraph in Art. 15/3; under Art. 15/4 this document is signed by both parties.
  • The details of the responsible person are entered in your quality manual, the relevant procedures and your economic operator registration.
  • The service continues permanently and continuously: release checks, documentation updates, surveillance and reporting follow-up run according to the calendar in the contract.

Deliverables

  • A job description and responsibility sharing document written according to the subparagraphs of Art. 15/3.
  • The qualification file of the person responsible for regulatory compliance: diploma and professional experience evidence.
  • The responsible person's details to be entered into your quality management system documents, and procedure revision notes.
  • A draft adverse event and field safety corrective action reporting procedure.
  • Periodic check records: release check, technical file and declaration of conformity currency, surveillance follow-up.

What we need from you

  • The document showing your SME status.
  • The device list: risk class, Basic UDI-DI and ÜTS registration details.
  • The quality management system manual and the release, complaint and corrective action procedures.
  • The technical documentation and EU declarations of conformity.
  • The post-market surveillance plan and, if any, the latest PMS report or PSUR.

Out of scope

  • Notified body conformity assessment and CE certification.
  • Testing and laboratory processes, including laboratory selection and test arrangement.
  • Interpreting or changing your technical specifications.
  • Finding an importer or distributor.

Related services

Frequently asked questions

Can a micro or small enterprise obtain the person responsible for regulatory compliance from outside?

Yes. Medical Device Regulation Art. 15/2 does not require these enterprises to have the responsible person within their organization; it requires them to have the services of this person permanently and continuously.

Do you provide this service to medium or large manufacturers?

No. Under Art. 15/1 these manufacturers have the responsible person within their own organization. In that case we can support you in preparing the job description and procedures of the person within your organization.

What qualification must the person responsible for regulatory compliance have?

Under Art. 15/1, either a relevant higher education diploma together with professional experience in medical device regulation or quality management systems, or longer professional experience in these fields. The qualification documents are given as an annex to the contract.

Does all responsibility pass to you?

No. The person responsible for regulatory compliance is responsible for ensuring the duties in Art. 15/3; the manufacturer's general obligations in Art. 10 stay with the manufacturer. The division of duties is set in writing under Art. 15/4.

Can you be the person responsible for regulatory compliance for a manufacturer established in the EU?

No. Medex is established in Türkiye; the person responsible for regulatory compliance of a manufacturer within the EU is expected to be within the EU as well.

Can we take the service together with ÜTS registration consultancy?

Yes. In that case the declaration of conformity, the label and the instructions for use to be uploaded to ÜTS pass through the responsible person's check before upload; differences between the document and the record are corrected before registration.

What happens if our technical file is incomplete?

First we list what is missing. We can carry out building the technical file in line with the documents coming from the manufacturer under our technical file service.

For the qualifications, duties, the micro and small enterprise exception and the registration steps, see our guide to the person responsible for regulatory compliance (PRRC).

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara