top of page

Label and Instructions for Use Check: Before ÜTS Registration

We check your label and instructions for use against Annex I Art. 23, the symbols and the Turkish-language rule, and catch ÜTS rejection reasons before registration.

Label and Instructions for Use Check: Before ÜTS Registration

Medical Device Label and Instructions for Use Check

We check your medical device label and instructions for use against Article 23 of Annex I of the Medical Device Regulation, the symbols you use and the Turkish-language rule. You get the label back marked up; next to each change we write the article it rests on. We catch the rejection reasons we encounter in ÜTS before registration. To start, send the label files, the instructions for use and the device list; you can use our price quote form.

Who it is for

  • Domestic manufacturers: those who prepare the label for the first time or who add a new model, new packaging or a new language
  • Class I and Class A device manufacturers: whose label is not read by a notified body before placing on the market
  • Importers: those who add their own information to a label coming from abroad and have the Turkish label and instructions for use prepared
  • Companies whose ÜTS product application came back: for a label or image reason

Legal basis

The language and legibility of the label and the instructions for use are among the manufacturer's general obligations:

"Manufacturers shall ensure that the information specified in point 23 of Annex I accompanies the device in a manner compliant with Article 7, paragraph 1, subparagraph (ğ) of Law No. 7223 and, where applicable, in the official EU language or languages determined by the EU member state in which the device is made available to the user or patient. The particulars on the label shall be indelible, easily legible and clearly comprehensible to the intended user or patient." (Medical Device Regulation Art. 10/11)

One of the particulars that must be on the label is one of the lines most often skipped:

"An indication that the device is a medical device. If the device is made exclusively for clinical investigation purposes, the statement “exclusively for clinical investigation”," (Medical Device Regulation Annex I 23.2-n)

The basis for symbols is also in Annex I:

"Where appropriate, the information provided by the manufacturer shall take the form of internationally recognised symbols. Any symbol or identification colour used shall conform to the harmonised standards or common specifications. In areas for which no harmonised standards or common specifications exist, the symbols and colours shall be described in the documentation supplied with the device." (Medical Device Regulation Annex I 23.1-g)

For an imported device, the importer's particulars are also on the label or in the accompanying document:

"Importers shall indicate on the device or on its packaging or in a document accompanying the device their name, registered trade name or registered trade mark, the registered place of business at which they can be contacted and their address. Importers shall ensure that any additional label does not obscure any information on the label provided by the manufacturer." (Medical Device Regulation Art. 13/3)

What we check on the label

We go through Annex I 23.2 point by point; for each point we record whether it applies, where it stands on the label and whether it is correct.

  • The name or trade name of the device and the particulars the user needs to identify the device.
  • The name and address of the manufacturer; for a manufacturer outside Türkiye, the name and address of the authorized representative.
  • The lot or serial number, the expiry date or the manufacturing date.
  • The UDI carrier.
  • The storage and handling conditions, warnings and precautions.
  • Single use, sterile status and the sterilization method, where applicable.
  • The indication that the device is a medical device.
  • The CE mark and, if a notified body is involved, the body's number.
  • For an imported device, the importer's particulars and that an additional label does not obscure information on the manufacturer's label.

For the general rules of the label, see our page on the label and instructions for use document in ÜTS.

Symbols

An important part of the information on the label is given by symbols. We check each symbol against ISO 15223-1: including the MD symbol, manufacturer, date of manufacture, use-by date, lot, authorized representative, UDI and importer symbols. If a symbol with no counterpart in the standard is used, it must be explained in the documentation supplied with the device under Annex I 23.1-g.

What we check in the instructions for use

Annex I 23.4 determines the content of the instructions for use. We check that the intended purpose, indications, contraindications, target patient group and intended users are written; that residual risks and warnings match the risk file; and that information shared with the label is the same in the two documents. If the product name, variants or intended purpose differ between the label and the instructions, we mark both.

Instructions for use may be omitted for Class I and Class IIa devices only if the exemption conditions in Annex I 23.1-ç exist. Electronic instructions for use are possible only under the conditions in the Communiqué on Electronic Instructions for Use of Medical Devices, to which Annex I 23.1-e refers.

The Turkish-language rule

The label and instructions for use information of a device made available on the domestic market must comply with the provision of Law No. 7223 to which Art. 10/11 refers. We explained the details of the Turkish label and instructions for use in our article on Turkish label and instructions for use.

Rejection reasons we encounter in ÜTS

These are the reasons we see in ÜTS product records applications that came back because of the label and images:

  • The MD symbol was not on the label.
  • The CE mark was not in the instructions for use.
  • In the product image, a UDI other than the product's own UDI was visible.
  • The label contained information of another model.
  • The trade name on the label was not the same as the brand name in the declaration of conformity.

Before the label file goes to ÜTS, we check each of these reasons. For the image rules, see our page on ÜTS product image and label rules.

Process

  • You send the label files, the instructions for use, the device list and the declaration of conformity.
  • We check the label against Annex I 23.2, the instructions against 23.4, and the symbols and the Turkish-language rule.
  • We send the marked-up label and the check table.
  • Your designer updates the label; we check the new version again.

Deliverables

  • A marked-up label with the point it rests on written next to each change.
  • An instructions for use check table.
  • A list of the symbols used on the label, with their names.
  • A pre-check note made according to ÜTS rejection reasons.

What we need from you

  • A label file for each packaging level, editable or high-resolution.
  • The current version of the instructions for use.
  • The device list: risk class and Basic UDI-DI.
  • The declaration of conformity, for comparing names, brands and codes.
  • Product images, if an ÜTS registration will be made.

Out of scope

  • Notified body conformity assessment and CE certification.
  • Testing and laboratory processes, including laboratory selection and test arrangement.
  • Interpreting or changing your technical specifications.
  • Finding an importer or distributor.

Related services

Frequently asked questions

Is the MD symbol mandatory on the label?

Annex I 23.2-n requires an indication on the label that the device is a medical device. We have seen rejections in ÜTS because of labels without this indication; the MD symbol gives this indication.

Are instructions for use needed for a Class I device?

In general yes. Annex I 23.1-ç gives an exemption for Class I and Class IIa devices if safe use is possible without instructions and nothing else is stated.

Do you design the label?

No. We mark up the label and write what must change and why. Your designer makes the change and we check the new version.

Can the importer stick its own label over the manufacturer's label?

The importer's information is on the device, on the packaging or in an accompanying document; under Art. 13/3, an additional label may not cover any information on the manufacturer's label.

Can I use electronic instructions for use?

Only if the conditions in the Communiqué on Electronic Instructions for Use of Medical Devices, to which Annex I 23.1-e refers, are met.

Do you also check IVD device labels?

Yes, according to the IVD Regulation's own Annex I.

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara