top of page

ÜTS Product Registration

Your company registration is ready and your documents have reached "Registered" status; now it is the turn of the device itself. Product registration is the ÜTS step with the most fields and the most returns

ÜTS Product (Medical Device) Registration: How Is It Done?

Your company registration is ready and your documents have reached "Registered" status; now it is the turn of the device itself. Product registration is the ÜTS step with the most fields and the most returns, because every piece of data you enter here must match the document you hold and the product label exactly.

This page explains product registration from start to finish based on Articles 25, 27 and 30 of the Guide on Registration Processes of Medical Devices to the Product Tracking System (the TİTCK Guide), which regulate device registration, and Article 40, which regulates the device application. From which screen to register, to choosing the application type, from the single-declaration rule to product limits, the whole process is here.

Device Registration and Device Application: Two Separate Operations

As on the document side, there are two stages on the device side. The registration notification creates the data in ÜTS; the application submits that data to the Agency for assessment. The eleventh paragraph of Article 25, the twelfth paragraph of Article 27 and the thirteenth paragraph of Article 30 of the Guide say the same thing: for the device registration or update notification to be assessed for conformity with the relevant regulation and the Guide provisions, a device application must be made to the Agency as set out in Article 40.

The same provision is repeated for SİP and custom-made medical device registrations: the fifteenth paragraph of Article 26, the sixteenth paragraph of Article 28 and the eighteenth paragraph of Article 29 of the Guide give the same direction.

The result is summarized by the sentence in the fourteenth paragraph of Article 39 of the Guide: applications that do not reach "Under Review" status cannot be assessed by the Agency review expert. If a company fills in the registration screen but does not submit an application, nothing moves forward; the product waits in "Ready for Application" status and never passes to "Registered".

Blocks on the Registration Screen: From Identifier to Application Status

The device registration screen is divided into blocks, and each block collects a specific group of information. Under the first paragraph of Article 25 of the Guide, for device registration under the Old Medical Device Regulations the headings are: "Identifier Information", "Imported/Manufactured Information", "Classification Information", "Product Documents", "Product Images", "Features", "Dimension Information", "Storage/Usage Condition Information" and "Application Status".

  • Identifier Information: barcode organization, product number, brand name, product name, version/model, reference number, product description and the number of products in the contents.

  • Imported/Manufactured Information: whether the device is imported or manufactured, country of origin, country imported from and GTIP number.

  • Classification Information: the class of the device, GMDN code, branch type code and, on the new regulation screens, the EMDN term.

  • Product Documents: the documents to be linked to the device and, on the new regulation screens, the Basic UDI-DI.

  • Product Images: images of the device and label files.

  • Features: attributes such as sterility, whether it is single-use, shelf life, calibration and maintenance period.

  • Dimension Information: dimension types such as weight, length and diameter, and their units.

  • Storage/Usage Condition Information: fields on storage and usage conditions.

  • Application Status: the field that determines whether the record is a draft or ready for application.

On the new regulation screens one more block is added to this list. The first paragraph of Article 27 of the Guide for MDR and the first paragraph of Article 30 for IVDR list the blocks for registration and also include the heading "CMR and/or Endocrine-Disrupting Substance Information". This block does not exist on the screen in Article 25.

Which Screen Will You Register On? MDD/AIMDD/IVDD, MDR and IVDR

The framework under which your device is certified determines under which article you make the registration. Article 25 of the Guide regulates device registration under the Old Medical Device Regulations, Article 27 regulates device registration under MDR, and Article 30 regulates device registration under IVDR.

The screens look similar at first glance, but the fields are not the same. Under the second paragraph of Article 25 of the Guide, on the old regulation screen the "Primary Barcode Organization" field lists the GS1, HIBCC and ICCBBA standards; under the second paragraph of Article 27, on the MDR screen the field is called "UDI Issuing Entity" and IFA is added to the list. There is no Basic UDI-DI field on the old regulation screen, whereas on the MDR screen, under sub-item (c) of the fifth paragraph of Article 27, selecting a Basic UDI-DI is mandatory.

Choosing the wrong screen spoils the application from the start: the document type, the barcode field and the classification options will all fail to match. Before starting the registration, you need to be clear about which regulation the certificate and declaration in your hands refer to.

Fields on the IVDR Screen That Do Not Exist in MDR

A registration under IVDR is not the in vitro diagnostic version of an MDR registration; it contains questions of its own. Among the fields listed under the "Features" heading in the seventh paragraph of Article 30 of the Guide, three stand out that have no counterpart on the MDR screen.

  • Does it contain cells or substances of microbial origin?: the field regulated in sub-item (p) of the same paragraph.

  • Is it a new type of device?: the field regulated in sub-item (ş) of the same paragraph.

  • Is the device intended for self-testing or near-patient testing?: the field regulated in sub-item (t) of the same paragraph.

These three fields reflect the classification logic specific to IVDR. Under the definition in Article 4 of the Guide, a near-patient testing device means a device that is not intended for self-testing and is used outside a laboratory environment.

The "Ready for Application?" Question: Draft and Ready for Application

This single question in the last block of the registration screen determines whether your record moves on to the next step. Under sub-item (a) of the tenth paragraph of Article 25 of the Guide, this field is set to "No" if the registration notification of the device entered will be updated later or is not yet ready to be sent to the Agency with an application, and to "Yes" if the notification has taken its final form and is ready for application.

The consequence of the choice is written in the same sub-item. If "No" is selected, the status of the notification is saved in ÜTS as "Draft". If "Yes" is selected, the status of the notification is saved as "Ready for Application" and it is listed on the "List My Medical Devices" screen. The same provision is repeated in sub-item (a) of the eleventh paragraph of Article 27 for MDR registrations and in sub-item (a) of the twelfth paragraph of Article 30 for IVDR registrations.

The practical importance of the field shows at the next step: the application screen works only with devices in "Ready for Application" status. If you left this field as "No", you will not find your device in the application list.

Device Application and the Seven Application Types

Under the second paragraph of Article 40 of the Guide, a device application is started by selecting an application type from the list in the "Create Medical Device Application" area on the "Medical Device Application Transactions" screen under the "Medical Device" tab in ÜTS. The third paragraph of the same article lists the seven application types currently in the list.

  • Optical Products Application: the type defined for optician products.

  • Active Implantable Medical Devices Application: the type defined for active medical devices that can be implanted in the body.

  • Class 3 Products Application: the type defined for Class III devices.

  • Other Products Application: the general type used for devices that do not fall under the types above.

  • Custom-Made Medical Device Application: the type defined for the custom-made medical devices defined in Article 4 of the Guide.

  • System Procedure Pack Application: the type defined for system or procedure packs.

  • Products Under 2023/KK-1 & 2023/KK-2 Application: the type defined for products within the scope of the transition period extension.

When you select the type, under the fourth paragraph of the same article the "Medical Device Application Summary" screen appears. The declaration is selected here, products are added here, and approval is given here.

Which Device Goes Through Which Application Type?

Not all seven types proceed through the same steps. The fifth paragraph of Article 40 of the Guide regulates the steps to follow when "Optical Products Application", "Active Implantable Medical Devices Application", "Class 3 Products Application", "Other Products Application" or "Products Under 2023/KK-1 & 2023/KK-2 Application" is selected. In these five types the application is built around a declaration.

The sixth paragraph regulates separately the case where "Custom-Made Medical Device Application" or "System Procedure Pack Application" is selected. These two types have no declaration selection step; the application is built directly by selecting devices on the "Select Product" screen in the "Products to Be Applied For" area. This difference in the number of steps matches the difference in the product limit.

The Declaration Linked to the Application: Why Only One Declaration?

In the five standard application types, the first step is selecting the declaration. Under sub-item (a) of the fifth paragraph of Article 40 of the Guide, from the list on the "Select Declaration of Conformity/EU Declaration of Conformity" screen in the "Declaration" field of the "Medical Device Application Summary" screen, the declaration linked to the relevant device or devices is selected.

The critical restriction is in sub-item (c): since medical device applications can be created only from devices linked to a single declaration, only one declaration can be selected from this list. That is, more than one declaration of conformity cannot be combined in one application. Under sub-item (ç), the selected declaration is displayed in the list in the "Selected Declaration" field and, if a wrong selection was made, it can be removed with the "Remove" button.

For an importer with a large portfolio, this rule is the basis of application planning. If you hold five separate declarations of conformity from five different manufacturers, you need to set up at least five separate applications. Grouping your products by declaration before opening the registration clarifies in advance both the number of applications and the product list that will go into each one.

If the Declaration Does Not Appear in the List: "Ready for Application" Status

This is the most frequently asked question in device applications, and the answer is in sub-item (b) of the fifth paragraph of Article 40 of the Guide: only declarations linked to a device or devices in "Ready for Application" status are listed on the "Select Declaration of Conformity/EU Declaration of Conformity" screen.

That is, it is not enough for the declaration itself to be registered in the system; at least one device record linked to that declaration must be in "Ready for Application" status. If you cannot see your declaration in the list, first go back to the device record and check the "Ready for application?" field. If the record is in "Draft" status, the declaration is not listed either.

How Many Products Can Be Added to One Application? 500 and 5

The product limit varies by application type, and there are two different figures.

  • Standard device applications: under sub-item (ğ) of the fifth paragraph of Article 40 of the Guide, device applications of this kind contain at most 500 medical device notifications. This limit applies to optical products, active implantable medical devices, class 3 products, other products, and applications for products under 2023/KK-1 and 2023/KK-2.

  • Custom-made medical device and SİP applications: under sub-item (d) of the sixth paragraph of the same article, device applications of this kind contain at most 5 medical device notifications.

Although 500 looks like a wide limit, it alone is not enough for planning, because the products that can enter the same application are also restricted by a grouping rule. For companies with large catalogues, what determines the number of applications is often not the 500 limit but the grouping rule below.

Application Grouping Rule: Same GMDN, Same Basic UDI-DI

Which devices can enter an application together is determined by the framework the device is in, and there are two separate rules.

Under the seventh paragraph of Article 40 of the Guide, in device applications under the Old Medical Device Regulations, applications are allowed only for devices linked to the same GMDN code. Under the eighth paragraph, in device applications under the New Medical Device Regulations, except for custom-made medical devices, applications are allowed only for devices linked to the same Basic UDI-DI code.

Read together, these two rules give the following picture: on the old regulation side, applications are set up on a GMDN basis; on the new regulation side, on a Basic UDI-DI basis. Under sub-item (c) of the fifth paragraph of Article 27 of the Guide, the Basic UDI-DI is the main key that links devices of the same manufacturer with the same intended purpose, risk class and basic design and manufacturing characteristics. Hence, on the new regulation side, an application naturally covers a family of closely related devices.

GMDN and EMDN must not be confused. Under the definitions in Article 4 of the Guide, GMDN stands for Global Medical Device Nomenclature and EMDN for European Medical Device Nomenclature. They are two separate fields in ÜTS, and one does not replace the other. The difference between the two is covered in detail on the GMDN and EMDN Code page.

Order of Linking Documents to the Device Registration

The "Product Documents" block on the device registration screen shows why document registration comes first. Under sub-item (a) of the fifth paragraph of Article 25 of the Guide, the "Documents" field is mandatory in ÜTS, and the documents to be added to this field are selected from among the documents that are in "Registered" status in ÜTS as a result of the application under Article 39. The same provision is in sub-item (a) of the fifth paragraph of Article 27 for MDR registrations.

There is also an order within this field. Under the third sub-item of the same sub-item, the class of the relevant device must have been selected on the registration screen before document selection; the system filters the documents that can be selected according to the class of the device. On the MDR side the chain is one link longer: under the third and fourth sub-items of sub-item (c) of the fifth paragraph of Article 27, before making a selection from the "Select Basic UDI-DI" screen, the EU Declaration of Conformity and EU Certificate associated with the device must have been selected according to the document business rule, and only the Basic UDI-DI numbers associated with the selected EU Declaration of Conformity are shown in the list. Under the same sub-item, more than one selection cannot be made in this field.

The order is: the class is selected, the documents suited to the class are selected, and then the Basic UDI-DI is selected. Trying this path in reverse leads to empty lists in the fields.

Signature and Payment Chain in a Device Application

Once the devices to be added to the application are selected, a three-step chain runs. Under sub-item (f) of the fifth paragraph of Article 40 of the Guide, if all the devices that should be in the application are in the "Products to Be Applied For" list, the "Approve" action is performed on the "Medical Device Application Summary" screen, and only users of the "Medical Device Registration Officer" type of the relevant company can perform this action.

Sub-item (g) of the same paragraph regulates the remaining two steps. If there is nothing contrary to procedure and business rules in the device notifications of the application, the application is created in "Awaiting Signature" status; for the application to go to the Agency in "Under Review" status, it must first be signed electronically by the company's authorized signatory and brought to "Awaiting Payment" status, and then, once the application fee is paid, it moves to "Under Review" status. The same sub-item repeats that applications that do not reach "Under Review" status cannot be assessed. For custom-made medical device and SİP applications, the same chain is regulated in sub-items (c) and (ç) of the sixth paragraph.

This chain also clarifies the division of duties in companies that work with a consultant: the registration and approval step lies with the person who has been assigned the "Medical Device Registration Officer" authorization, and the electronic signature step lies with the company's authorized signatory.

Product Statuses: Registered, Rejected, Unique Product Exists in the System

The status of a device record in ÜTS determines which operations you can perform with that device. The first paragraph of Article 40 of the Guide defines the goal: for medical devices that are ready for application to reach "Registered" status in ÜTS, a device application must be made.

The other statuses have concrete consequences. Under sub-item (ı) of the second paragraph of Article 42 of the Guide, all devices in a free sale certificate application must be in "Registered" status in ÜTS; if the application includes devices in "Rejected" or "Unique Product Exists in the System" status, the application is rejected by the Agency. There is a similar obstacle on the system and procedure pack side: under sub-item (a) of the eleventh paragraph of Article 26 of the Guide, if medical devices not in "Registered" status are selected, ÜTS automatically blocks the SİP application.

The "Unique Product Exists in the System" status comes up when the same barcode is registered under more than one company. Under the third paragraph of Article 43 of the Guide, a data correction request is submitted for the opinion of the other company or companies that have records with the same barcode in "Registered" or "Unique Product Exists in the System" status in ÜTS; at this stage the request is in "Awaiting Opinions of Other Companies" status, and the period for those companies to give an opinion on an imported product data correction request is 5 days. Companies that do not give an opinion within the stated period are deemed to have accepted the request. The 5 days here is the period the legislation gives to the party that wants to give an opinion; it is not the time in which a transaction will be completed.

Spare Parts, Accessories and Components: Which Is Registered?

Not every part is registered in ÜTS, and where the line is drawn is clearly written in the Guide. Under the fifth sub-item of sub-item (z) of the seventh paragraph of Article 25 of the Guide, without prejudice to the registration of biocidal or cosmetic products, only medical devices, in vitro diagnostic devices and parts defined as medical device accessories or in vitro diagnostic device accessories that fall under the definition of "Device" in Article 4 of the Guide and are within the scope of the Medical Device Regulations are registered in ÜTS. The same sub-item ends with a clear sentence: parts defined as spare parts are not registered in ÜTS. The same provision is repeated in sub-item (dd) of the seventh paragraph of Article 27 for MDR registrations and in sub-item (aa) of the seventh paragraph of Article 30 for IVDR registrations.

The basis of the distinction is in the definitions. Under Article 4 of the Guide, a spare part is a part or component intended to replace a defective or worn part in order to maintain or restore the function of a device without changing its performance, safety characteristics or intended purpose. A medical device accessory is not a medical device on its own, but it is registered in ÜTS.

Its counterpart on the registration screen is a question field. Under sub-item (z) of the seventh paragraph of Article 25 of the Guide, the field "Is it a component/accessory of a device?" is mandatory, and "Yes" is selected if the device is an accessory of another medical device or a part of a device that is intended to replace a part or component of a device and significantly changes its performance, safety characteristics or intended purpose. Under the third sub-item of the same sub-item, if "Yes" is selected, the "Branch Types of the Main Device" field regulated in sub-item (aa) appears on the screen, and at least one branch type code must be selected in this field.

This choice also has a convenient consequence. Under the fourth paragraph of Article 17 of the Guide, for Class IIa devices that are accessories of another device, no obligation to upload instructions for use is required if the relevant field is selected as "Yes" during registration.

On Whose Behalf Is the Product Registration Made?

The "Imported/Manufactured Information" field determines not on whose behalf the registration is made but where the device comes from, and its criterion is a single person: the legal manufacturer who issues the declaration. Under sub-item (a) of the third paragraph of Article 25 of the Guide, if the manufacturer company issuing the declaration of conformity to which the device is linked is established in Türkiye, this field is selected as "Manufactured", and if it is not in Türkiye, as "Imported". The same criterion applies in sub-item (a) of the third paragraph of Article 27 for MDR registrations and in sub-item (a) of the third paragraph of Article 30 for IVDR registrations.

The dealership relationship creates a separate condition. Under the third sub-item of sub-item (a) of the eleventh paragraph of Article 26 of the Guide, if the company that will register the SİP in ÜTS is not the importer or manufacturer of the medical devices that make up the SİP, an ÜTS dealership record for the relevant devices is mandatory. For SİP registrations under MDR, the same condition is in the fourth sub-item of sub-item (a) of the eleventh paragraph of Article 28. The same sub-items state that the company selects the devices it is the manufacturer or importer of from the "Add Medical Device You Are the Manufacturer Of" screen and the devices it is a dealer of from the "Add Medical Device You Are a Dealer Of" screen.

Configurable Devices and the "Product Description" Field

"Product Description" is an optional field under sub-item (ğ) of the second paragraph of Article 25 of the Guide; additional information describing the device, other than what is entered in the other identifier fields, can be entered here. But being optional does not mean it is unimportant: under the second sub-item of the same sub-item, the device and packaging information that the review expert needs to know during the assessment of the application is also entered in this field. The example in the Guide is the case where not all the information that must be on the label is on the label carrying the unique barcode, so the multi-box label is also uploaded.

For configurable devices the field is no longer optional. Under the third sub-item of the same sub-item, for configurable devices, it is mandatory to write in this field that the device is a configurable device with more than one configuration, and to enter the name of each configuration, its variant/model, its reference/catalogue number where available, and other information identifying the variant concerned. For MDR registrations, the same provision is in the third sub-item of sub-item (ı) of the second paragraph of Article 27.

There is also a limit: under the fourth sub-item of the same sub-item, only information and characteristics concerning the relevant device can be entered in this field. The field is not used for company promotion or for describing the general product family.

How Is the "Number of Products in the Contents" Calculated?

The calculation for this mandatory field is given with examples in sub-item (h) of the second paragraph of Article 25 of the Guide. The basic rule is in the second sub-item: the number of products in the device packaging is entered in this field, and since ÜTS registration is made on the smallest packaging placed on the market, this value equals the number of products in the contents of the smallest device packaging. The content quantities of multi-sales packaging formed by combining several devices registered with the smallest packaging are added later in the "Market Placement Information" field on the screen of the device.

  • Packaging with several of the same device: under the third sub-item, the number of products in the contents equals the packaging contents. The Guide's example: if the smallest device packaging contains 4 units of device A, 4 is entered in this field.

  • Kit made up of several components: under the fourth sub-item, 1 is entered in this field. If the smallest package consists of several identical kits, the number of products in the contents equals the number of kits in the packaging. The Guide's example: if the smallest packaging consists of 2 units of kit B made up of components a, b, c and d, 2 is entered in this field.

  • Device used as a pair: under the fifth sub-item, the number of products in the contents equals the number of pairs. The Guide's example: for 1 pair (right/left) of gloves in the smallest package, 1 is entered in this field.

  • If the pair information is not in the documents: under the same sub-item, if the fact that the device is used as a pair is not stated on the label, packaging or documents, this information is also entered in the "Product Description" field.

The same rules and examples are repeated for MDR registrations in sub-item (i) of the second paragraph of Article 27.

Not Breaking the Order in Product Registration: Checklist

Most of the returns in product registration come not from data errors but from order errors. The list below shows at a glance the order set out by the provisions of the Guide cited above.

  • Document registration is completed first: under sub-item (a) of the fifth paragraph of Article 25 of the Guide, only documents that have reached "Registered" status as a result of the application under Article 39 can be linked to the device.

  • The correct screen is selected: the registration screen in Article 25, 27 or 30 is used according to the framework in which the device is certified.

  • The class is selected: under the third sub-item of the same sub-item, the class of the device must have been selected before document selection.

  • Documents are selected, then the Basic UDI-DI: in MDR registrations, under sub-item (c) of the fifth paragraph of Article 27, the Basic UDI-DI is selected after the relevant EU Declaration of Conformity and EU Certificate have been selected.

  • The "Ready for application?" field is set to "Yes": otherwise the record stays as "Draft" and is not listed on the application screen.

  • Grouping by application type and the single-declaration rule: under sub-item (c) of the fifth paragraph of Article 40, only one declaration can be linked to an application.

  • The grouping rule is applied: devices linked to the same GMDN under the old regulation and to the same Basic UDI-DI under the new regulation are sent together.

  • Approved, signed, paid: the registration officer approves, the authorized signatory signs, the fee is paid and the application moves to "Under Review".

The exact list of mandatory fields is covered on the ÜTS Device Registration Mandatory Fields page, barcode and UDI rules on the UDI-DI and Barcode Rules page, and image and label rules on the ÜTS Product Image and Label Rules page. The way to bulk-upload catalogues with many products is explained on the ÜTS Bulk Product Registration page, and the details of the document side are explained on the ÜTS Document Registration page.

If you also place your device on the EU market, you can take a look at our English guide on UDI carrier requirements.

ÜTS Registration

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara