top of page

Documents Required for ÜTS Registration

The question "which documents are needed for ÜTS" has no single answer, because there are three separate stages in ÜTS and each stage asks for a different set of papers

Documents Required for ÜTS Registration: A Stage-by-Stage Checklist

The question "which documents are needed for ÜTS" has no single answer, because there are three separate stages in ÜTS and each stage asks for a different set of papers. What is asked at company registration is not the same as what is asked at document registration; the documents entered at device registration build on the first two. This page separates the three stages and lists, on the basis of the TİTCK Guide and the relevant regulation provisions, which document is requested where, by which route of approval and in what number.

The Document Lists of the Three Stages Are Not the Same

For a device to reach "Registered" status in ÜTS, three steps must be completed in order. Document registration cannot be made without company registration, and device registration cannot be made without document registration. Paragraph 3 of Article 5 of the Guide regulates in which cases physical papers are requested at company registration, paragraphs 4 to 8 of Article 39 regulate by which type document applications are made, and paragraphs 5 to 7 of Article 25 regulate the document fields at device registration.

  • Company registration: Depending on the company type it mostly proceeds without physical papers; the ÇKYS number is the critical field.

  • Document registration: The stage at which certificates, declarations, the instructions for use and optional documents are uploaded to ÜTS and an application is made to the Agency.

  • Device registration: The stage, after the documents reach "Registered" status, at which the device's own data, images and label are entered.

Papers Requested at the Company Registration Stage

Company registration is the lightest stage for most companies. Paragraph 3 of Article 5 of the Guide expressly states that if the company type "company with a MERSİS record" or "sole proprietorship without a MERSİS record" is selected, no physical paper is required for the application. Paragraph 2 of the same article states that company records are made on the basis of MERSİS or VEDOP, and that if a company has both a MERSİS and a VEDOP number, the transaction is carried out through the MERSİS number.

The point that really needs attention is ÇKYS. According to paragraph 5 of Article 5 of the Guide, companies that will make a company registration of the "Manufacturer/Importer/Dealer/Exporter" type in ÜTS must hold a medical device sales centre licence, and the ÇKYS number must be entered at company registration. The same paragraph states that, with the amendment published in Official Gazette No. 32202 dated 26/5/2023, a sales centre authorisation certificate is not required for the places where the devices in Annex-3 of the Regulation on Sales, Advertising and Promotion are sold, other than manufacturers or importers, but that this exception does not remove the obligations determined by the Medical Device Regulations.

Partnership Agreement and Signature Circular in an Ordinary Partnership

The only exception is the ordinary partnership. Paragraph 3 of Article 5 of the Guide provides that if the company type is "Ordinary partnership company", a company registration application must also be made through EBS for the company registration process to be completed, and lists two documents.

  • Ordinary partnership agreement: The original or a notary-approved copy is sent to the Agency through EBS together with the standard petition.

  • Signature circular or declarations: The originals or notary-approved copies of the signature circulars or signature declarations of the persons named in the agreement are sent.

Paragraph 4 of the same article states that if the ordinary partnership application ends negatively, the physical papers sent to the Agency will be returned with a cover letter; if the registration is concluded positively, the originals of the physical papers will not be returned and will be kept in the Agency's archive.

Documents Requested in the Sales Centre Authorisation Certificate Application

The sales centre authorisation certificate, which is the source of the ÇKYS number, is obtained not in ÜTS but at the directorate. Paragraph 2 of Article 5 of the Regulation on Sales, Advertising and Promotion of Medical Devices lists the documents to be submitted together with the application petition.

  • Responsible manager contract: Where the operator of the sales centre is not the responsible manager, the written service contract concluded between the operator and the responsible manager.

  • Personnel documents: For the personnel to be employed, the responsible manager, sales and promotion staff and, if any, clinical support staff documents issued under Article 35 of the Regulation.

  • Commercial records: A copy of the Turkish Trade Registry Gazette, the tax plate and the registry certificate.

  • Undertaking: An undertaking, regarding the devices to be sold and promoted, that it will sell devices registered in the Agency's registration and information management system.

  • Workplace opening licence: The workplace opening and operating licence obtained from the relevant authority; if the place is in a free zone, technology park or organised industrial zone, the document obtained from the relevant administration; if it is a pharmaceutical warehouse, the pharmaceutical warehouse licence issued by the Agency.

Paragraph 1 of Article 6 of the same Regulation states that the prepared documents will be examined by the directorate within fifteen working days from the application date, and that, if there is no deficiency in the application, an on-site inspection will be made within forty-five working days from the application date. These are the examination periods that the legislation gives the administration; they are not the time in which the work is concluded.

Documents to Be Requested from the Manufacturer for an Imported Device

If you are bringing devices from abroad, most of the document set comes from the manufacturer. Formulating the request correctly is important; a document that arrives in the wrong format has to be requested again.

  • Approved original of the EC/EU certificate: Paragraph 1 of Article 8 of the Guide accepts, for certificates of a foreign manufacturer, in the "Original Document" field: the apostilled version; the version approved by the embassy/consulate of the Republic of Türkiye in the manufacturer's country; the original of the e-Apostille document, provided it can be verified; the original of the e-signed certificate, provided it can be verified; and, if the certificate is published with all its pages on the notified body's official query site or in EUDAMED, its original if e-signed, or a copy certified by a Turkish notary if not e-signed.

  • Declaration of conformity or EU declaration of conformity: Paragraph 1 of Article 12 of the Guide lists, for declarations of a foreign manufacturer, the routes of the apostilled version, the embassy/consulate-approved version, the verifiable e-Apostille original and the verifiable e-signed original.

  • Instructions for use: Paragraph 1 of Article 18 of the Guide provides that, in importer notifications, if the original instructions were not prepared in Turkish, the original and its Turkish translation; if prepared in several languages including Turkish, all pages of the multilingual instructions; and if the instructions were prepared in Turkish by the manufacturer, the most recent original instructions prepared in at least one of the official languages of the EU together with the Turkish instructions, are uploaded.

  • Authorisation document of the EU authorised representative: Subparagraph (b) of paragraph 7 of Article 12 of the Guide states that, for manufacturers established outside the EU or Türkiye, the agreement and/or authorisation document between the manufacturer and the EU authorised representative is uploaded to the "Authorisation Document" field; alternatively, an output of the EUDAMED actor screen can be uploaded.

Optional documents are a separate group. Paragraph 9 of Article 23 of the Guide states that the Authorised Distributorship Document, and paragraph 9 of Article 21 that the document called "Quality Management Certificate – ISO-13485", are not mandatory documents to be uploaded to ÜTS. Article 24 of the Guide also states that a Turkish catalogue containing an image identifying the device, short information and reference/catalogue/version/model information can be uploaded, and that the uploaded catalogues will be recorded without being subject to checking by the review expert.

Documents to Be Prepared for a Domestic Manufacturer

If a domestic manufacturer is registering its own product, the route is completely different. Paragraph 1 of Article 9 of the Guide states that, in applications for the EC/EU certificate of their own products, domestic manufacturers must select "e-signed Document Application for Manufacturer Companies" as the Document Application Type and must select "Yes" for the option "Are you the manufacturer of the products within the scope of the document?".

  • Annex-21 undertaking and a copy of the certificate: Subparagraph (a) of paragraph 2 of Article 9 of the Guide provides that, if the certificate was issued by a notified body established outside Türkiye, the original of the undertaking, an example of which is in Annex-21 and which is electronically signed by the company's "Responsible Manager" or "Signatory", is uploaded to the "Original Document" field together with a complete copy of the relevant certificate.

  • Turkish and e-signed declaration: Paragraph 1 of Article 13 of the Guide states that, in the domestic manufacturer's own declaration of conformity or EU declaration of conformity notification, the original document language will be Turkish, and that the original of the document electronically signed by the person registered as the company's "Responsible Manager" or "Signatory" is uploaded to the "Original Document" field.

  • Certificate of Domestic Goods: Paragraph 6 of Article 22 of the Guide provides that, since the original document language will be Turkish, only the "Original Document" field is uploaded, and that the original of the document obtained from the chamber or a copy certified by a Turkish notary is uploaded to this field together with its annexes, if any.

  • ISO 13485: Paragraph 3 of Article 21 of the Guide states that, if the document was issued by a certification body established abroad, the routes of apostille, embassy/consulate, verifiable e-Apostille or the verifiable e-signed original apply; paragraph 5 states that, if the document was issued by a body established in Türkiye, the original of the document or a copy certified by a Turkish notary is uploaded.

Documents to Be Entered into the System at the Device Registration Stage

After the documents reach "Registered" status, it is the turn of device registration. Three document fields are mandatory at this stage, and all three are reviewed separately for content. Paragraphs 5, 6 and 7 of Article 25 of the Guide for the old regulations, and of Article 27 for the MDR, regulate these fields.

  • Product Documents: According to subparagraph (a) of paragraph 5 of Article 25 of the Guide, this field is mandatory; documents appropriate to the risk class of the device and the regulation it belongs to are selected from among those in "Registered" status in ÜTS. The class of the device must have been selected before selecting documents.

  • Product Images: According to paragraph 6 of Articles 25 and 27 of the Guide, this field is mandatory; photographs and/or technical drawings clearly showing the device are uploaded, a maximum of 10 images is permitted and the files are uploaded with the jpeg, jpg, pdf or png extension.

  • Original Label: According to subparagraph (b) of paragraph 7 of Article 25 and subparagraph (b) of paragraph 7 of Article 27 of the Guide, this field is mandatory; the current and original market placement label of the device and, if necessary, the inner/outer sales package are uploaded.

For devices on which SUT matching will be made, one more document becomes mandatory. The fifth sub-item of subparagraph (v) of paragraph 7 of Article 25 and the fifth sub-item of subparagraph (bb) of paragraph 7 of Article 27 of the Guide state that uploading a Turkish Catalogue to ÜTS is mandatory for devices for which a SUT matching application will be made. The same subparagraphs also define when each of the options "Match Exists", "Match Will Be Made" and "No Match" is selected.

Mandatory Documents, Optional Documents and Quantity Limits

The document business rule tables in Annex-81 to Annex-100 of the Guide show, for each class, which documents are mandatory, which are optional, and how many of the optional documents can be linked. The optional column has the same structure in all classes.

  • Quality Management Certificate ISO 13485: Optional, a maximum of 1.

  • Authorised Distributorship Document: Optional, a maximum of 1.

  • Certificate of Domestic Goods: Optional, a maximum of 1.

  • Technical File: Optional, a maximum of 1.

  • Catalogue: Optional and there may be more than one.

Being optional has a second consequence. Paragraph 9 of Article 21 of the Guide for ISO 13485, paragraph 9 of Article 22 for the Certificate of Domestic Goods and paragraph 9 of Article 23 for the Authorised Distributorship Document repeat the same provision: even if the registration of these documents in ÜTS falls into rejected status for any reason, the device or devices linked to the relevant document continue to remain in registered status. That is, the rejection of an optional document does not drop your device registration.

What Is Uploaded to the "Technical Document Relating to the Products in the Document" Field?

This is a field you encounter in declaration of conformity notifications, and its content is asked about very often. The number of items requested varies according to the regulation under which the declaration was issued.

Paragraph 6 of Article 10 of the Guide provides that, for declarations of conformity under the old regulations, a technical document of five items is requested if deemed necessary: the effect and mechanism of action of the medical device; its intended purpose, place of use, duration of use and target population; the class of the medical device, the classification rule and its rationale; the product content and, according to the form of the product, percentage component information; and label information and the instructions for use.

Paragraph 5 of Article 11 of the Guide, on the other hand, asks for a longer list for EU declarations of conformity under the MDR and IVDR: the name/trade name and general description of the device; the name and address of the manufacturer; the UDI-DI number and, if any, the EU certificate number; the intended purpose; the place of use; the form of contact; the duration of use; the population to be used on; the mechanism of action; the class and classification rule; the device content and, according to its form, percentage component information, together with label information and the instructions for use. The same paragraph requires these documents to be in the technical file of the device and the entire technical file to be kept ready to be delivered to the Agency when deemed necessary.

How Should the Document Scope Be Written? "Surgical Hand Instruments" Is Not Enough

The product scope in the content of a document is one of the most frequent sources of rejection. Paragraph 5 of Article 10 of the Guide states that the scope of the medical devices in the declaration of conformity must be able to identify the product, that general expressions are not sufficient to identify the product, and gives the example itself: instead of "Surgical hand instruments", detail such as forceps, retractor and dilator should be given.

The same paragraph also shows what is to be done if there is non-compliance with this point in documents issued for imported products: a document listing the branch types or product descriptions that contain the detail of the products described in general terms is uploaded separately to the "Technical Document Relating to the Product(s) in the Document" field. In other words, instead of waiting for the manufacturer to reissue the document, the route of having a list prepared that opens up the scope is available.

Date Rule for the Declaration of Conformity: 26/05/2021 and 26/05/2022

For declarations of conformity under the old regulations, two dates draw a firm limit, and these limits are checked directly in the ÜTS review.

  • MDD and AIMDD declarations: Paragraph 8 of Article 10 of the Guide states that, under Article 110 and subparagraph (d) of paragraph 1 of Article 111 of the MDR, the MDD and AIMDD were repealed as of 26/5/2021, and that the date of first issue of a declaration of conformity issued for devices under the MDD or AIMDD must be before 26/05/2021.

  • IVDD declarations: Paragraph 9 of Article 10 of the Guide states that, under Article 107 and subparagraph (d) of paragraph 1 of Article 108 of the IVDR, the IVDD was repealed as of 26/5/2022, and that the date of first issue of a declaration of conformity issued for devices under the IVDD must be before 26/05/2022.

This does not mean that the declaration can never be updated. Both paragraphs state that, provided the relevant devices benefit from the transitional provisions, the declaration can be updated within a limited framework: updates can be made for changes such as a change of manufacturer's address, a change of manufacturing site, a change of EU authorised representative and a change of GMDN code, other than "significant changes" in the product scope of the declaration and in the design and intended purpose of the devices. The same paragraphs add that a declaration updated in this way is expected to be linked to its version issued before 26/5/2021 or 26/5/2022; if no link can be established, the old version or versions must be uploaded to the "Technical Document Relating to the Product(s) in the Document" field.

Who Issues the Documents? The Legal Manufacturer Rule

Paragraph 3 of Article 10 of the Guide is a single sentence and leaves no room for discussion: the Declaration of Conformity is issued by the legal manufacturer. Paragraph 3 of Article 11 of the Guide repeats the same rule for the EU Declaration of Conformity.

The consequence of this for the importer is this: you cannot write a declaration of conformity on your own letterhead. It is the legal manufacturer that will issue the declaration; the importer's task is to carry the declaration into ÜTS by the correct route of approval and in full.

Contract Manufacturing: Showing the Address in the Declaration and Certificate

If the legal manufacturer has production carried out by another company, the documents are expected to show this. Paragraph 4 of Article 10 of the Guide states that if the manufacturing company has its devices within the scope of the declaration produced by another manufacturer, the title and address information of that manufacturer is also expected to be in the declaration of conformity or the EC certificate; if this information is not in the documents and is not on the label or sales package of the device either, the Agency, if it deems necessary, will request that the technical file pages containing this information be uploaded to the "Technical Document Relating to the Product(s) in the Document" field. Paragraph 4 of Article 11 of the Guide repeats the same rule for the EU declaration of conformity and the EU certificate.

On the device registration side there is a separate field for this. The field "Was the product manufactured by another manufacturer by its legal manufacturer?" in subparagraph (gg) of paragraph 7 of Article 27 of the Guide is mandatory; if "Yes" is selected, the manufacturing company/institution that carries out the production is selected. The IVDR counterpart is subparagraph (çç) of paragraph 7 of Article 30.

Document Validity Periods

The validity periods of documents vary by document type, and some document types have no period at all. The items below are taken word for word from the relevant articles of the Guide.

  • EC Certificate: According to paragraph 3 of Article 6 of the Guide, except for the EC Verification Certificate and the EC Type Verification Certificate, EC certificates have a validity period and this period cannot exceed 5 years. The validity may be extended, on the basis of re-assessment upon the manufacturer's application, for additional periods each not exceeding 5 years.

  • EC Verification and EC Type Verification Certificates: Under the same paragraph, these two certificate types have no validity period.

  • EU Certificate (MDR/IVDR): According to paragraph 3 of Article 7 of the Guide, EU certificates remain valid for the period indicated on the certificate, not exceeding 5 years, as long as no change or update is made to the certificate during this period.

  • Certificate annexes: Paragraph 3 of Articles 6 and 7 of the Guide states that any annex to a certificate continues to be valid as long as the certificate to which it is added is valid.

  • Quality Management Certificate ISO 13485: According to paragraph 5 of Article 20 of the Guide, the validity period of this type of document cannot exceed 3 years.

  • Certificate of Domestic Goods: According to paragraph 5 of Article 22 of the Guide, the validity period is one year from the date of issue.

Which Document Is Uploaded with Which Application Type?

Even if you upload the document correctly, when you choose the wrong application type the document will not appear in the list. Paragraph 4 of Article 39 of the Guide lists four application types, and paragraphs 5 to 8 match which document type goes with which type.

  • Document Application for Importer Companies: According to paragraph 5 of Article 39 of the Guide, selected for the document types referred to in Articles 8, 12 and 15; that is, for the importer's notifications of certificates, declarations and SIP declarations of a foreign manufacturer.

  • Document Application for Importer or Manufacturer Companies for other types: According to paragraph 6, selected for the document types referred to in Articles 18, 19, 21, 22 and 23; that is, for the Instructions for Use, the Intended Use Form, ISO 13485, the Certificate of Domestic Goods and the Authorised Distributorship Document.

  • e-signed Document Application for Manufacturer Companies: According to paragraph 7, selected for the document types referred to in Articles 9, 13 and 16; that is, for the domestic manufacturer's certificate, declaration and SIP declaration notifications for its own product.

  • Document Application under Announcement No. 2023/KK-1: According to paragraph 8, selected for the MDR and IVDR transition period applications referred to in Articles 47 and 50 of the Guide.

Paragraph 9 of Article 39 of the Guide states that only documents appropriate to the selected application type will be listed on the "Select Document" screen. If you cannot find the document you are looking for in the list, the first thing to check is the application type.

Where Does the Process Stop If a Document Is Missing?

The second sub-item of subparagraph (a) of paragraph 5 of Article 25 of the Guide states that the documents to be selected at device registration are chosen from among the documents that are in registered status in ÜTS as a result of the application made under Article 39. If the document has not reached "Registered" status, it does not appear at all in device registration; therefore the device application cannot be opened either.

The second limit is the quantity limit. Paragraph 15 of Article 39 of the Guide states that a document application may contain at most 5 document notifications. The same limit is repeated in paragraph 7 of Article 8, paragraph 5 of Article 12 and paragraph 5 of Article 15. For a sixth document you need to open a separate application.

Twelve-Item Document Pre-Check Before Registration

The list below gathers the items to go through before sending the document application.

  • Is the route of approval correct? Which of the routes in paragraphs 1 and 3 of Article 8 and paragraph 1 of Article 12 of the Guide will be used is determined by looking at the document; not every document type has an "original" option.

  • Was the original uploaded for an e-Apostille? Subparagraph (c) of paragraph 1 of Article 8 of the Guide states that it is mandatory to upload not the printout of the e-apostilled document but the original given digitally by the authority.

  • Is the e-signature verifiable? The relevant subparagraphs of the same article state that documents whose e-signature cannot be verified and/or which have an invalid e-signature are not accepted.

  • Is the translation complete? According to subparagraph (b) of paragraph 2 of Article 8 of the Guide, the translation must carry the translator's name and surname, stamp/signature/seal and the translator's declaration that the translation conforms to the original.

  • What was uploaded to the Turkish field? According to subparagraph (a) of the same paragraph, only the Turkish part of the document approved by the sworn translator is uploaded to the "Turkish Document" field.

  • Are the annexes complete? Paragraph 6 of Article 6, paragraph 6 of Article 7 and paragraph 7 of Article 10 of the Guide require the document to be uploaded in full, with all its annexes and additional pages.

  • Is the document start date correct? According to paragraph 4 of Articles 6 and 7 of the Guide, if the document has been revised, the revision date is entered as the start date; if there is no revision and no date is clearly stated, the most recent date of issue is entered.

  • Was the revision number entered? According to paragraph 5 of the same articles, if the revision number is shown on the certificate together with the document number, the certificate is registered with the revision number.

  • Is the scope detailed enough? According to paragraph 5 of Article 10 of the Guide, general expressions are not sufficient; if necessary, a detail list is uploaded to the technical document field.

  • Do the signature and the authorised person's name match? The second sub-item of subparagraph (a) of paragraph 2 of Article 9 and the second sub-item of subparagraph (ç) of paragraph 1 of Article 13 of the Guide make it mandatory that the name and surname of the authorised person in the document and the name and surname of the person who electronically signed the document match.

  • Is the notified body defined? Paragraph 7 of Articles 6 and 7 of the Guide states that if the notified body that issued the certificate is not defined in ÜTS, before the document registration a request is opened through the "Notified/Conformity Assessment Body Transactions" field on the "Submit Request" screen.

  • Is the document data the same as the ÜTS data? Paragraph 2 of Articles 6 and 7 of the Guide states that the information entered into ÜTS and the information on the certificate must be the same; paragraph 2 of Articles 10 and 11 repeats the same rule for declarations.

Companies can also carry out the preparation of the document set, having translations made and creating the application through ÜTS by opening authorisation for a consultant from their own ÜTS company pages; in this case, under paragraph 13 of Article 39 of the Guide, the person who electronically signs the application is still the company's signatory.

For the counterpart on the EU side, our English page on the EU declaration of conformity is a guide.

ÜTS Registration

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara