
Imported Medical Device ÜTS Registration
You are bringing a medical device in from abroad, and to place it on the Turkish market you need to register it in the Product Tracking System
Registering an Imported Medical Device in ÜTS: The Importer's End-to-End Guide
You bring medical devices from abroad, and to place a device on the market in Turkey you have to register it in the Product Tracking System. The problem usually does not lie in the question "how is the registration done" but in which document each field on the registration screen is to be read from and in correctly identifying which role you hold. This page explains every critical field you will meet as an importer, together with the provision it rests on.
The information below rests on the provisions of the TİTCK Manual on Registration Procedures of Medical Devices in the Product Tracking System (Tıbbi Cihazların Ürün Takip Sistemine Kayıt Süreçlerine İlişkin Kılavuz) and the Medical Device Regulation (Tıbbi Cihaz Yönetmeliği). You will see the article numbers within the sentences, so that you can return to the source while preparing your own application.
Who Is an Importer? The Definition in the Legislation and Its Counterpart in ÜTS
According to the definition in Article 4 of the Manual, an importer is a natural or legal person established in Turkey who places a device from another country on the market in Turkey. The definition has two legs: the device must come from another country, and you must be the one who makes it available in Turkey for the first time.
On the ÜTS side, the counterpart of this role is the firm type you select in the firm registration. Article 5(5) of the Manual states that firms registering as the "Manufacturer/Importer/Dealer/Exporter" ("Üretici/İthalatçı/Bayi/İhracatçı") type must hold a medical device sales centre licence and that the ÇKYS number (Core Resource Management System) must be entered during firm registration. The same paragraph, with the amendment published in Official Gazette No. 32202 of 26/5/2023, expressly states that no sales centre authorisation certificate is required for places selling the devices in Annex-3 of the Regulation on Sales, Advertising and Promotion, except for their manufacturers or importers, but that this exception does not remove the obligations set by the Medical Device Regulations.
• Precondition: Without a ÇKYS number your registration as an importer-type firm cannot be completed; the licence process has to be finished first.
• Update route: If the firm's responsible manager, title or address changes, under Article 5(7) of the Manual this information is reflected automatically in ÜTS once it is updated in ÇKYS. Correct the ÇKYS side, not the ÜTS side.
Importer or Distributor? The Wrong Role Means the Wrong Registration
Article 4 of the Manual defines a distributor as a natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a device available on the market up to the point of putting into service. In other words, if you do not bring the device from abroad yourself and instead buy it from an importer in Turkey and sell it on, you are a distributor. This distinction is not cosmetic; the obligations of the two roles are regulated in two separate articles of the Medical Device Regulation.
Article 13 of the Medical Device Regulation lists the general obligations of importers and Article 14 those of distributors. Before placing a device on the market, the importer is obliged to verify the CE marking, that the EU declaration of conformity has been drawn up, that the manufacturer has been identified, the labelling and the instructions for use, and, where applicable, the assignment of the UDI. The distributor, under Article 14(2), additionally verifies, for imported devices, that the importer has complied with the requirements in Article 13(3). If you position yourself in the wrong role, your answers to the questions asked in an inspection will be wrong, just as your ÜTS record will be.
What the Importer Verifies Before Placing on the Market
Point (a) of Article 13(2) of the Medical Device Regulation lists four headings that the importer must verify before placing a device on the market. This verification is to be done before you open the ÜTS screen, because the same items will also be entered into system fields during registration.
• CE marking and declaration of conformity: It is verified that the device bears the CE marking and that the EU declaration of conformity has been drawn up.
• Manufacturer and authorised representative: It is verified that the manufacturer has been identified and that an authorised representative has been appointed by the manufacturer in accordance with Article 11 of the Regulation.
• Label and instructions for use: It is verified that the device has been labelled in accordance with the Regulation and that the required instructions for use accompany the device.
• UDI: Where required, it is verified that a UDI has been assigned by the manufacturer in accordance with Article 27 of the Regulation.
Point (b) of the same article says that if you consider that a device does not conform to the requirements of the Regulation, you may not place it on the market until it has been brought into conformity, and you must inform the manufacturer and its authorised representative. If you consider that the device presents a serious risk or is a falsified device, you also inform the Agency. Paragraph 7 regulates the case where you notice the non-conformity later: you promptly inform the manufacturer and the authorised representative and cooperate with the manufacturer, the authorised representative and the Agency on corrective action.
Is "Imported" or "Domestic" Selected in ÜTS?
One of the fields most often filled in wrongly on the registration screen is the "Import/Domestic Information" ("İthal/İmal Bilgisi") field. Firms often choose by looking at their own position. The Manual, however, sets a different criterion: what is decisive is not your location but the location of the legal manufacturer that issued the declaration of conformity.
Point (a) of the third paragraph of Article 25 of the Manual for the old regulations, Article 27 for the MDR and Article 30 for the IVDR repeats the same rule: if the manufacturer that issued the declaration of conformity to which the device is linked is established in Turkey, this field is selected as "Domestic" ("İmal"); if it is not located in Turkey, it is selected as "Imported" ("İthal"). The same points state that when the field is selected as "Imported", the "Country of Import" ("İthal Edilen Ülke") and "Customs Tariff Statistics Position Number" ("GTİP Numarası") fields open on the registration screen and must be filled in.
A Manufacturer in a Free Trade Zone
The only written exception to the rule is free zones. According to the third sub-point of point (a) of the third paragraph of Articles 25, 27 and 30 of the Manual, for devices produced by a legal manufacturer established in one of the regions designated as a Free Trade Zone by the Ministry of Trade, this field is selected as "Domestic". It would be wrong to select "Imported" automatically just because you buy goods from a free zone.
Country of Origin and Country of Import Are Not the Same Thing
Because the two fields look similar, the same country is often entered for both. The Manual defines them differently. The country of origin is the country where the device is physically produced; under point (ç) of Article 25(3) and point (b) of Article 27(3) of the Manual it is a field that must be selected. More than one country can be selected in this field. The country of import shows from which country the device is brought to Turkey and becomes mandatory only when "Imported" is selected.
• Country of Origin: The country or countries where the device is physically produced. It is mandatory in every record, whether "Imported" or "Domestic".
• Country of Import: The country or countries from which the device is imported. It opens and becomes mandatory only when the "Import/Domestic Information" field is selected as "Imported".
For a device that a legal manufacturer established in Germany has produced at a facility in China and that is shipped to you from a warehouse in the Netherlands, all three countries are different. Filling in the fields correctly from the start is easier than opening a data correction request later.
Selecting the Country of Origin in Contract Manufacturing
The third sub-point of point (ç) of Article 25(3), the third sub-point of point (b) of Article 27(3) and the corresponding point of Article 30 of the Manual regulate contract manufacturing separately. If the legal manufacturer has the device produced by a different manufacturer, the country or countries where the manufacturer producing the device is established are selected in the country of origin field. The same provision applies where the legal manufacturer produces at a production facility that it owns but that is in a country other than the one where it is established; in that case the country where the production facility is located is selected.
For records under the MDR there is one more field in which this situation is declared separately. The field "Was the product manufactured by another manufacturer on behalf of its legal manufacturer?" in point (gg) of Article 27(7) of the Manual is mandatory, and if "Yes" is selected, the manufacturing firm/institution is selected. The fourth sub-point of the same point says that in this case the country where the manufacturing firm is established must also be selected in the country of origin field. The counterpart on the IVDR side is point (çç) of Article 30(7).
The Customs Tariff Statistics Position (GTİP) Number Field and a Code Not on the List
According to point (c) of Article 25(3) and point (ç) of Article 27(3) of the Manual, the GTİP number is a field that must be filled in for records selected as "Imported". The field is not free text; a selection is made from the list defined in the system.
If the code you are looking for does not appear in the list, the solution is not to select a similar code. The third sub-points of the same points state that if the GTİP number of the device is not in the system, a request can be created for the number to be added by selecting the "Add GTİP Code" ("GTİP Kodu Ekleme") request field on the "Report Request" ("Talep Bildir") screen in ÜTS, and if the request is found suitable, the number will be added as an option. This is a step to be settled before registration.
EU Authorised Representative Requirement for Manufacturers Outside the EU/Turkey
Article 11(1) of the Medical Device Regulation is clear: if the manufacturer is not established in Turkey or in an EU member state, the device can be placed on the market only on condition that the manufacturer appoints an authorised representative. The first sub-point of point (b) of Article 7(2) of the Manual repeats the same requirement and says that the information on the EU authorised representative must be on the EU certificate.
The counterpart on the ÜTS side is Article 12(7) of the Manual. Point (a) of this paragraph states that in document registration notifications of the "EU Declaration of Conformity (MDR/IVDR)" type belonging to manufacturers not established in an EU member state or in Turkey, an entry in the "EU Authorised Representative" ("AB Yetkili Temsilcisi") field on the ÜTS registration screen is mandatory. Point (d) of the same paragraph closes the opposite direction: manufacturers established in an EU member state or in Turkey cannot appoint an EU authorised representative; this requirement exists only for manufacturers established outside the EU or Turkey. So trying to fill in this field on the document of a manufacturer established in France is also a mistake.
What Is Uploaded to the "Authorisation Document" Field?
Point (b) of Article 12(7) of the Manual says that the agreement and/or authorisation document made between the manufacturer firm and the EU authorised representative is uploaded to the "Authorisation Document" ("Yetki Belgesi") field that opens under the "EU Authorised Representative" field. The same point also defines an alternative: an output of the actor screen of the manufacturer concerned on the EUDAMED website, in which the information of the EU authorised representative concerned is also clearly visible, can be uploaded to this field.
• Approval condition: According to point (c), the original of the authorisation document and its Turkish translation by a sworn translator are uploaded together. No apostille or embassy/consulate certification is required on the original of the authorisation document.
• EUDAMED exception: According to the first sub-point of point (c), if a EUDAMED output has been uploaded to this field, the sworn Turkish translation of the output does not need to be uploaded separately.
• Physical submission: Point (ç) states that the document uploaded to the "Authorisation Document" field does not need to be sent physically to the Agency.
In practice these three rules are among the places where the most paperwork is lost. Instead of needlessly having an apostille obtained on the authorisation document, it is enough to have the manufacturer-representative agreement and its sworn translation prepared directly.
When Another Firm Has a Record with the Same Barcode
For imported devices, the same product can be brought in by more than one Turkish firm. In that case multiple records with the same barcode are created in ÜTS, and the data differences between the records directly affect your application. Article 43(1) of the Manual provides that where there are records belonging to different firms for a device registered in ÜTS with the same barcode and there are data differences between these records, the relevant data fields must be made identical and consistent in ÜTS before the first device application to be made for the device under Article 40.
The screen where you can see the overlap is inside the registration page. Point (d) of Article 27(2) and point (d) of Article 30(2) of the Manual state that in the "Products with the Same Barcode" ("Aynı Barkodlu Ürünler") field, the product records of other firms registered with the same barcode are listed. Looking at this list before the registration application lets you see in advance which fields are inconsistent.
When a data correction request is opened, the process does not run one-sidedly. According to Article 43(3) of the Manual, the request is submitted for opinion to the other firms that have records with the same barcode, and the period granted by the legislation to these firms for stating their opinion is 5 days; a firm that does not state an opinion within the period is deemed to have accepted the request. Fields such as class, GMDN and EMDN are, under paragraph 7 of the same article, in any case submitted to the Agency for its assessment and approval.
How Is the Importer's Information Shown on the Label?
Article 13(3) of the Medical Device Regulation requires importers to indicate their name, registered trade name or registered trademark, registered place of business and address at which they can be contacted, on the device or on its packaging or in a document accompanying the device. The same paragraph also obliges the importer to ensure that an additional label does not obscure any information on the label provided by the manufacturer.
This is directly tied to the ÜTS record. Point (b) of Article 27(7) of the Manual lists the common information that, under Chapter III of the General Safety and Performance Requirements in Annex I of the MDR, is required on the label and/or the sales packaging and is taken into account in the device registration review. This list includes, for imported medical devices, the importer's name or trade name and registered place of business address, if not on the instructions for use or the sales packaging, and, if the manufacturer is established outside the EU and Turkey, the name and registered place of business address of the EU authorised representative. The counterpart on the old regulations side is point (b) of Article 25(7).
When Are You Considered a Manufacturer Rather Than an Importer?
Some actions move you into the legal position of a manufacturer. The definition of manufacturer in Article 4 of the Manual covers a person who manufactures or fully refurbishes a device, or who has a device designed, manufactured or fully refurbished, and markets that device under its own name or trademark.
Article 16(1) of the Medical Device Regulation lists three cases in which a distributor, importer or other natural or legal person assumes the obligations incumbent on manufacturers.
• Placing on the market under your own brand: According to point (a), a person who makes the device available on the market under its own name, registered trade name or registered trademark assumes the obligations of a manufacturer. The point itself also defines an exception: cases where, by an agreement with the manufacturer, the manufacturer continues to be identified as the manufacturer on the label and remains responsible for meeting the requirements placed on manufacturers in the Regulation are outside it.
• Changing the intended purpose: According to point (b), changing the intended purpose of a device that has already been placed on the market or put into service gives rise to the obligations of a manufacturer.
• Modification that affects conformity: According to point (c), modifying the device in such a way that compliance with the applicable requirements may be affected has the same consequence.
Point (a) of Article 16(2) draws a reassuring limit: in respect of a device that has already been placed on the market, providing the information supplied by the manufacturer, including translations, and other information necessary to market the device is not considered a modification that may affect conformity. In other words, having Turkish instructions for use prepared does not make you a manufacturer.
28 Days' Prior Notice for Relabelling / Repackaging
If you carry out the activities in points (a) and (b) of paragraph 2, that is, relabelling or repackaging, two additional obligations arise. Article 16(4) of the Medical Device Regulation requires distributors and importers carrying out these activities to ensure that they hold a quality management system that includes procedures ensuring that the translation of the information is accurate and up to date, that the activities are carried out in a way that preserves the original condition of the device, and that the packaging of the repackaged device is not defective, of poor quality or untidy.
Paragraph 5 regulates the notification duty: at least 28 days before the relabelled or repackaged device is made available on the market, the manufacturer and the Agency are informed of the intention to make that device available. The same paragraph states that, on request, a sample or mock-up of the device, including the translated label and instructions for use, will be provided to the manufacturer and the Agency, and that within the same 28-day period a certificate issued by a notified body designated for the types of devices subject to the activities concerned, attesting that the quality management system complies with the requirements in paragraphs 3 and 4, will be submitted to the Agency. The 28 days here are not a completion time for the work but the prior notification period laid down by the legislation.
The Importer's Storage, Transport and Complaint Record Obligations
The importer's work does not end when the ÜTS registration is completed. Article 13 of the Medical Device Regulation lists the obligations that continue while the device is under your responsibility, and most of them are the first items asked about in an inspection.
• Storage and transport conditions: Under paragraph 5, while the device is under your responsibility you ensure that storage or transport conditions do not jeopardise its compliance with the general safety and performance requirements set out in Annex I, and you comply with any conditions set by the manufacturer.
• Record keeping: Under paragraph 6, you keep a register of complaints, of non-conforming devices, and of recalls and withdrawals; you provide the manufacturer, the authorised representative and distributors with the information requested to allow them to investigate complaints.
• Reporting adverse events: Under paragraph 8, if you receive complaints or reports from healthcare professionals, patients or users about suspected adverse events related to a device you have placed on the market, you promptly forward this information to the manufacturer and the authorised representative.
• Keeping documents: Under paragraph 9, for the period referred to in Article 10(8) of the Regulation, you keep a copy of the EU declaration of conformity and, where applicable, a copy of every certificate issued under Article 56, including any amendments and supplements.
• Cooperation with the Agency: Under paragraph 10, on request you cooperate with the Agency in activities carried out to eliminate or reduce the risks posed by devices you have placed on the market; at the Agency's request you provide samples of the device free of charge or give access to the device.
There is a parallel rule on the sales centre side. Article 31(3) of the Regulation on Medical Device Sales, Advertising and Promotion requires the details of the previous and, if any, the next economic operator in the supply chain to be recorded on a batch, serial, lot, brand and model basis, and these records to be kept for at least ten years.
The Document Chain for an Imported Device: Declaration, Certificate, Manual
The ÜTS registration of an imported device is completed in three stages: firm registration, document registration and device registration. The backbone of the document stage is uploading the foreign manufacturer's certificates and declarations by the correct certification route.
Article 8(1) of the Manual lists the routes accepted for the "Original Document" field in "EC Certificate" or "EU Certificate (MDR/IVDR)" notifications belonging to a foreign manufacturer: the apostille-certified copy; the copy certified by a Republic of Türkiye embassy/consulate in the manufacturer's country; the original of an e-apostille-certified document, provided it can be verified; the original of an e-signed certificate, provided it can be verified; and, if the certificate is published on the notified body's official query site or in EUDAMED, the original if it is e-signed or a copy certified by a Turkish notary if it is not e-signed. Article 8(2) states that only the Turkish part of the document approved by the sworn translator is uploaded to the "Turkish Document" field, and that the document must contain the translator's name and surname, stamp/signature/seal and the translator's declaration that the translation is faithful to the original.
For the declaration of conformity the routes are narrower. Article 12(1) of the Manual lists, for "Declaration of Conformity" or "EU Declaration of Conformity (MDR/IVDR)" notifications belonging to a foreign manufacturer, the apostille-certified copy, the embassy/consulate-certified copy, the verifiable e-apostille-certified original and the verifiable e-signed original. Article 12(2) repeats the translation rule as in Article 8.
For the instructions for use, the requirement depends on the class of the device. Article 17(2) of the Manual makes uploading the instructions for use mandatory for Class III and Class IIb devices under the MDR and MDD, for Class IIa devices if instructions have been drawn up, for Class B, C and D devices and Self-Test, Near-Patient Test and Companion Diagnostic devices under the IVDR, for Annex II List A and List B devices and Self-Test devices under the IVDD, and for devices under the AIMDD. Article 18(1) also divides the language combination the importer uploads into three possibilities: if the original was not prepared in Turkish, the original and its Turkish translation; if it was prepared in multiple languages including Turkish, all pages of the multilingual manual; if it was prepared in Turkish by the manufacturer, the most current original manual prepared in at least one of the official languages of the EU together with the Turkish manual.
Registration Verification Period: 2 Weeks from Placing on the Market
The importer's registration obligation is not limited to ÜTS. Article 30(2) of the Medical Device Regulation requires importers, within 2 weeks of placing a device other than a custom-made device on the market, to verify that the manufacturer or the authorised representative has entered the information referred to in paragraph 1 of the same article into the electronic system. If the information is missing or incorrect, the authorised representative or manufacturer concerned is informed; importers add their own information to the relevant entry.
Article 31 of the Regulation also defines a series of periods, and these periods are duties placed on the parties.
• Registration time: Under paragraph 1, before placing a device other than a custom-made device on the market, manufacturers, authorised representatives and importers that are not already registered enter their registration information into the electronic system.
• Update on change: Under paragraph 4, economic operators update the data within 1 week of any change in the information.
• Periodic confirmation: Under paragraph 5, economic operators confirm the accuracy of the data within 1 year of submitting the information and every 2 years thereafter.
A Ten-Item Pre-Registration Checklist for the Importer
The list below gathers the items that should be ready on your desk before you open the ÜTS screen. Each line rests on one of the provisions explained above.
• Firm type and ÇKYS: Under Article 5(5) of the Manual, a ÇKYS number is mandatory for registration as the "Manufacturer/Importer/Dealer/Exporter" type; the licence process must have been completed.
• Identifying the legal manufacturer: Who issued the declaration of conformity is determined; the choice of "Imported" or "Domestic" depends on this under Articles 25(3), 27(3) and 30(3) of the Manual.
• EU authorised representative: If the manufacturer is established outside the EU or Turkey, the authorised representative appointed under Article 11 of the Medical Device Regulation and the authorisation document under Article 12(7) of the Manual must be ready.
• Barcode: Under Articles 25(2) and 27(2) of the Manual, the barcode of the device is entered as it appears in its technical documents, without any change; the record is opened with the barcode of the smallest packaging placed on the market.
• Certification of the declaration and certificate: Which of the certification routes in Articles 8 and 12 of the Manual will be used is chosen beforehand by looking at the document; not every route is available for every document type.
• Sworn translation: Under Articles 8(2) and 12(2) of the Manual, only the Turkish part is uploaded to the "Turkish Document" field, together with the translator's declaration and stamp.
• Instructions for use: The list of mandatory classes in Article 17(2) of the Manual is checked; the upload is made according to the language combination in Article 18.
• Product images: Under Articles 25(6) and 27(6) of the Manual, a photograph or technical drawing clearly showing the device is uploaded; images belonging to another device, the catalogue itself and unclear images are not accepted.
• Original label: Under point (b) of Article 25(7) and point (b) of Article 27(7) of the Manual, the current, original label as placed on the market and, where required, the inner/outer sales packaging are uploaded.
• Class and codes: The class selection, the GMDN code and, in MDR/IVDR records, the EMDN term are selected consistently with the documents; Articles 25(4) and 27(4) of the Manual regulate these fields.
All of these steps are carried out through your firm's own page in ÜTS. In practice, many importers run the process by opening a user authority for a consultant on this page; the consultant creates the firm, document and product records with the "Medical Device Registration Operator" authority and takes the "Approve" action under Article 39(11) and point (f) of Article 40(5) of the Manual. On the other hand, under Article 39(13) and point (g) of Article 40(5), the person who signs the application electronically is the firm's signatory; the e-signature stays with the firm. Article 31(4) of the Regulation on Sales, Advertising and Promotion also states that the accuracy of the information recorded in the system is the responsibility of the firm making the record.
You can find the place of the same subject in EU legislation in our English article titled EU Importer Obligations.
For the model under which a manufacturer abroad can sell in Turkey, see our guide to sales models of foreign manufacturers in Turkey.
