Sales Centre Inspection Preparation and UTS Stock Check
We check your sales centre against the inspection form before the inspection, and compare your UTS registrations and notifications with your stock.

Sales Centre Inspection Preparation and UTS Stock Check
We check your sales centre against the inspection form before the inspection, and compare your UTS registrations and notifications with your stock.
Medical Device Sales Centre Inspection Preparation
Before your medical device sales centre is inspected by the Provincial Health Directorate, we check it against the inspection form used by the inspection team. We compare your individual notifications and registrations in UTS with your actual stock, review working documents, records and advertising material, and report deficiencies in writing with the article they are based on. If a deficiency has been recorded in the inspection, we prepare the remedy file. To start, send your sales centre authorisation certificate and your UTS company details.
Who this is for
- Medical device sales centres approaching the mandatory inspection that takes place every two years.
- Sales centres that have recently received an authorisation certificate and are waiting for their first inspection.
- Sales centres where a deficiency has been recorded in the inspection and must be remedied within the period given.
- Companies that have received a letter from the Authority requesting information and documents.
Legal basis
The inspection frequency of the sales centre is set out in the Regulation:
"Sales centres are inspected by the directorate once every two years as a mandatory requirement. They are also inspected by the Authority where it is deemed necessary." (Medical Device Sales, Advertising and Promotion Regulation, Art. 27(1))
The scope of the inspection is not limited to sales:
"In sales centres, sales, promotion and advertising activities, and every kind of material and method used in these activities, are inspected." (Medical Device Sales, Advertising and Promotion Regulation, Art. 27(2))
The responsible director's obligation during the inspection:
"The responsible director of the sales centre must provide every kind of facilitation during these inspections and must hand over all information, documents and registers requested." (Medical Device Sales, Advertising and Promotion Regulation, Art. 27(4))
Failure to provide documents leads directly to suspension of activity. Under Art. 29(1), the activity of the sales centre is temporarily suspended for fifteen days in the following cases:
"a) Failure to send the information and documents requested by the directorate." "c) Failure to provide the information and documents requested by the inspection team during the inspection, or obstruction of the inspection." (Medical Device Sales, Advertising and Promotion Regulation, Art. 29(1))
One of the records that will be requested during the inspection is the supply chain record:
"Sales centres keep, on a regular basis by parameters such as batch, serial, lot, brand and model, the name, trade name or brand and contact details of the previous and, where applicable, next economic operator in the supply chain, together with other information that will facilitate the tracking of the devices. They retain these records for at least ten years from the date they begin to place the devices on the market and, upon request, present them to the Authority." (Medical Device Sales, Advertising and Promotion Regulation, Art. 31(3))
The periods given during the inspection, the sanctions, and the suspension of activity and cancellation of the authorisation certificate are explained in detail in our article on sales centre inspection.
Questions on the inspection form
The inspection team uses the Medical Device Sales Centre Inspection Form in Annex 2 of the Regulation. The six questions on the form are:
"1- If the centre sells devices directly to individual users, is at least one staff member documented by the directorate with a working certificate present at the centre during working hours?"
"2- Are the devices stored under the conditions specified by their manufacturer and required by international standards?"
"3- Are the devices sold registered in the registration and information management system created by the Authority?"
"4- Have individual notifications been made for the devices sold in the registration and information management system created by the Authority?"
"5- Is there a case of refusal to provide the information and documents requested by the inspection team during the inspection?"
"6- Is there any situation not stated in the form but contrary to the provisions of this Regulation?" (Medical Device Sales, Advertising and Promotion Regulation, Annex 2)
The registration and information management system referred to in the third and fourth questions is UTS. Our pre-inspection answers these six questions in order.
What we check
- Whether the authorisation certificate, address and activity information match the UTS company record.
- Whether the working certificates of the responsible director, sales and promotion officer and clinical support officer are issued in the name of this sales centre.
- Whether every device sold is registered in UTS.
- Whether the stock in UTS matches the actual stock: whether acquisition, transfer, delivery to the consumer, export and HEK notifications are missing or incorrect.
- Whether supply chain records are kept by batch, serial, lot, brand and model.
- Whether storage conditions comply with the conditions in the instructions for use.
- Whether advertising and promotion on the website, social media and printed material comply with the Regulation.
- Whether devices declared unsafe or contrary to technical regulation by the Authority are in stock or on sale.
Letters from the Authority
In its announcement dated 5 October 2026, TİTCK explained the channel through which inspection correspondence is conducted:
"Within the scope of the inspection and examination activities carried out, communication with the relevant parties is provided through official correspondence in line with the Regulation on Procedures and Principles for Official Correspondence, and is conducted in accordance with the Notification Law No. 7201." (TİTCK Medical Device Inspection Department, Public Notice, 5 October 2026)
The same announcement states that the Authority does not inform parties by SMS or similar channels. If you receive a letter requesting information and documents, we prepare the response with you within the period given.
Process
- You send us the authorisation certificate, the working certificates and the UTS company details.
- We check your UTS registrations and notifications online; we take your stock list and compare it with the UTS stock.
- We send the pre-inspection report according to the six questions of the inspection form.
- We correct the missing and incorrect notifications in UTS, and state in writing, with the relevant article, what needs to be done for the other deficiencies.
What is delivered
- A pre-inspection report according to the inspection form.
- A UTS stock and notification reconciliation table.
- A list of deficiencies and the article supporting each one.
- If a deficiency has been recorded during the inspection, a remedy file and a response letter.
What we ask from you
- The medical device sales centre authorisation certificate.
- The working certificates.
- A current stock list: barcode, lot or serial number and quantity.
- User authority in UTS, or UTS screen printouts.
- The last inspection report, if any, and any letters received from the Authority.
Outside the scope
- Being present on the inspection day and representing the company to the inspection team.
- Legal work, objections and administrative court proceedings.
- Workplace opening and operating licence, fire and zoning matters.
- Laboratory, testing and calibration work.
Related services
- Medical Device Sales Centre Authorisation Certificate
- UTS Individual Notification Transactions
- Medical Device Advertising and Promotion Conformity Review
Frequently asked questions
How often are inspections carried out?
Under Art. 27(1), the directorate carries out a mandatory inspection once every two years; the Authority may also inspect where it deems it necessary.
My stock in UTS does not match my actual stock, what should I do?
The fourth question of the inspection form asks about individual notifications. We complete missing acquisition or transfer notifications, returns and HEK notifications before the inspection.
A deficiency was recorded in the inspection, how much time do I have?
Under Art. 27(3), the period depends on the nature of the deficiency and is set in the form in Annex 2. For example, the form gives 15 days for a device that is not registered in UTS.
Do you attend the inspection as well?
No. We prepare the pre-inspection check and, afterwards, the deficiency remedy file; the work is carried out online.
