top of page

ÜTS User Manual: A Section-by-Section Reading Guide

The sections of the TİTCK ÜTS Registration Manual: definitions, company registration, document types, device registration screen fields and bulk operations; document identity and effective date.

When you look for the answer to an ÜTS question in a three-hundred-page manual, the word "document" turns up in hundreds of places and you give up before finding the provision you need. Or worse: you rely on an article number given by a consultant or in training notes, but that number belongs to an older version of the Manual and regulates a different subject in the text you hold.

This page is a map of the Manual itself. It shows which range of articles each of the fifteen parts covers, which article answers which question, and how to check whether the text you are reading is current. It does not explain the content of the documents; it shows which door to enter by.

The source is the Manual on Registration Procedures of Medical Devices in the Product Tracking System (Tıbbi Cihazların Ürün Takip Sistemine Kayıt Süreçlerine İlişkin Kılavuz). All article numbers below were checked by comparing the table of contents of that text with the article headings.

First, verify the document identity

Every page of the Manual carries a fixed footer block: Document No, First Publication Date, Revision Date, Revision No and page number. If your copy reads "TCKKD-KLVZ-03", "13/05/2026", an empty revision date and revision number "00", you are reading the Manual with document number TCKKD-KLVZ-03, whose first version took effect on 13/05/2026. The revision history table at the end of the text also has a single row and gives "First publication" as the reason for revision number 00.

This is the first check to make before using any article number. Article 68(1) of the Manual states that the manual with document number TCKKD-KLVZ-01, published on 15/11/2022 and titled "Tıbbi Cihazların Ürün Takip sistemi Kaydına İlişkin Kılavuz (Rev.1)" (the Manual on Registration in the Product Tracking System of Medical Devices, Rev.1), has been repealed. So if you hold a text with document number TCKKD-KLVZ-01 today, its article numbers are not valid. The source does not explain how the document number went from 01 to 03; do not fill that gap yourself, just look at the footer block of your copy.

The effective date is not the same for all articles

It is a common mistake to assume that the whole Manual took effect at the same time. Article 69(1)(a) of the Manual states that the provisions referred to in Articles 8, 12 and 15 and in Article 39(4) take effect together with the ÜTS Version Update, in which those procedures become technically functional in ÜTS. Point (b) of the same paragraph states that the provisions referred to in the other articles took effect on the date the Manual was published.

The postponed provisions are not accidental: Articles 8, 12 and 15 regulate the certificate, declaration of conformity and system/procedure pack declaration applications of importer firms, while Article 39(4) regulates the list of application types itself. That a provision is written in the text does not mean it has a counterpart on the screen today.

Part One: the definitions are really a list of business rules

Part One consists of four articles. Article 1 of the Manual regulates the purpose, Article 2 the scope, Article 3 the legal basis and Article 4 the definitions.

Do not skip this part. Article 4(1) of the Manual determines what a concept means in ÜTS, and most disputes are settled here. For example, point (o) of the same paragraph defines "firm", point (y) the manufacturer, point (çç) the importer, point (ğ) the distributor and point (v) the economic operator. The legal basis is in the same part: Article 3(1)(b) rests on Article 34 of the Medical Device Regulation (Tıbbi Cihaz Yönetmeliği) and point (c) on Article 32 of the In Vitro Diagnostic Medical Device Regulation (İn Vitro Tanı Amaçlı Tıbbi Cihaz Yönetmeliği).

The question of scope is also answered here. Article 2(1) of the Manual states that the Manual covers the procedures and principles to be followed when carrying out in ÜTS the registration of medical devices and documents, together with the registration of firms operating in this field and other related registration notifications.

Part Two: firm registration is a single article

Whatever you are looking for about firm registration is in Article 5 of the Manual; do not look anywhere else. Paragraph 1 of that article regulates the authorization condition, paragraph 2 the distinction between registration sourced from EBS for MERSİS, VEDOP and pharmacies, paragraph 3 the EBS application and the physical paperwork requirement for ordinary partnership firms, paragraph 4 the return of paperwork in case of a negative decision, paragraph 5 the obligation to have a ÇKYS number for the "Manufacturer/Importer/Dealer/Exporter" type, paragraph 6 the update of the signatory and users in case of transfer and merger, and paragraph 7 the automatic reflection through ÇKYS of changes of responsible manager, title and address.

A single article with seven paragraphs is one of the densest parts of the whole Manual. Almost every question on the firm side comes down to one paragraph of this article.

Part Three: document types and the article for each document

Part Three runs from Article 6 to Article 24 of the Manual and determines under which type a document is notified in ÜTS. The document type and the application procedure for that document are often in separate articles; you need to go to whichever of the two holds the provision you are looking for.

  • Certificates: Article 6 of the Manual defines the "EC Certificate" type and Article 7 the "EU Certificate (MDR/IVDR)" type. The application procedure is in Article 8 for importer firms and in Article 9 for domestic manufacturers.


System and procedure pack declaration: Article 14 of the Manual regulates the "SİP Declaration (MDR) (Article 22)" type, Article 15 the importer applications and Article 16 the domestic manufacturer applications.


Instructions for use and intended use: Article 17 of the Manual regulates the "Instructions for Use" type and Article 18 the notification procedure for this type. Article 19(1) states that for Class IIa devices under the MDD, if the manufacturer has not prepared instructions for use, an intended use form/declaration will be prepared.


Quality management certificate: Article 20 of the Manual regulates the "Quality Management Certificate – ISO-13485" type and Article 21 its notification procedure.


Domestic goods and distributorship: Article 22(1) of the Manual states that the Domestic Goods Certificate is issued by the chamber or exchange where the manufacturer is registered, under the Domestic Goods Communiqué (Yerli Malı Tebliği) published pursuant to Article 63 of the Public Procurement Law (Kamu İhale Kanunu) No. 4734 of 4/1/2002. Article 23(1) states that the Authorized Distributorship Certificate is a document issued by the manufacturer of the device in the name of importer firms operating in our country.


Catalogue: Article 24(1) of the Manual states that a Turkish catalogue may be uploaded, and paragraph 2 states that uploaded catalogues are recorded in ÜTS without being checked by the review expert.

Parts Four and Five: what each field on the device registration screen means

These two parts are the largest section of the Manual by volume and explain the fields of the ÜTS registration screen one by one. The distinction is made according to which regulation the device is registered under.

Part Four is for the old regulations: Article 25 of the Manual regulates the medical device registration notification under the old medical device regulations, and Article 26 the system and procedure pack registration in the same scope.

Part Five is for the new regulations: Article 27 of the Manual regulates the medical device registration under the MDR, Article 28 the system and procedure pack registration under the MDR, Article 29 the custom-made medical device registration under the MDR, and Article 30 the medical device registration under the IVDR.

The internal structure of these four articles is similar, so they are easy to navigate. For example, Article 27(1) of the Manual states that the information to be entered into the system during device registration under the MDR is grouped under the headings "Identifying Information", "Import/Manufacture Information", "Classification Information", "Product Documents", "Product Images", "Characteristics", "Measurement Information", "Storage/Use Condition Information", "CMR and/or Endocrine Disruptor Substance Information" and "Application Status". The following paragraphs open these headings in order: paragraph 2 covers the identifying information, paragraph 5 the product documents and paragraph 6 the product images. If you know which heading the field you are looking for is under, you also know which paragraph to read.

Part Six: eight separate articles for bulk transactions

The section from Article 31 to Article 38 of the Manual regulates the notification transactions that can be carried out in bulk in ÜTS, and each type of transaction has its own article.

Article 31 of the Manual regulates bulk device addition and update under the old regulations, Article 32 the same transaction under the MDR and Article 33 the same transaction under the IVDR. Article 34(1) states that bulk device deletion is carried out for the records within the scope of Articles 25 to 30. Article 35(1) states that information that may be updated without an application, such as linking a new catalogue or uploading a new product image, can be entered on the "Bulk Update Product Without Application" screen ("Toplu Başvurusuz Ürün Güncelle"). Article 36 regulates bulk addition of placing-on-the-market information and Article 37 bulk addition of storage and use conditions. Article 38(1) states that measurement values that do not exist as parametric data fields in the template files mentioned in Articles 31, 32 and 33 can be added in bulk.

Part Seven: the two articles opened most often

Articles 39 and 40 of the Manual build the bridge between the registration transaction and the Agency's review, and they are the articles consulted most often in practice.

Article 39 of the Manual regulates document application transactions. Paragraph 4 gives the list of application types; paragraphs 9 to 11 the steps of attaching documents to the application and approving it; paragraphs 12 and 13 the status transitions; paragraph 14 that applications that do not reach the "Under Review" status cannot be evaluated; paragraph 15 that one document application may contain at most 5 document notifications; paragraphs 16 and 17 the "Report Request" ("Talep Bildir") route against a negative decision and against the update period; and paragraph 18 the certificate query after a positive decision.

Article 40 of the Manual regulates device application transactions. Paragraph 3 covers the device application types; paragraph 5 the steps from declaration selection to signature; paragraph 6 the custom-made medical device and system procedure pack applications; paragraphs 7 and 8 the condition that an application be linked to the same GMDN code or the same Basic UDI-DI code; and paragraph 9 the route to submit a request against a negative decision on device applications.

Parts Eight and Nine: certificate requests and data correction

Article 41(1) of the Manual states that the Agency issues a free sale certificate for export purposes, at the request of a domestic manufacturer or of the EU authorized representative, established in Türkiye, of a foreign manufacturer. Article 42 sets out the application steps in ÜTS: paragraph 2 is for domestic manufacturers and paragraph 3 for manufacturers whose EU authorized representative is established in Türkiye.

Part Nine is devoted to the problem of the same barcode being registered in ÜTS by different firms with different data. Article 43(1) of the Manual states that where there are data differences between the records of different firms for a device registered under the same barcode, the relevant product parameters must be made identical and compatible in ÜTS before the first device application to be made under Article 40. Article 44 regulates how this request is created in ÜTS.

Parts Ten and Eleven: transition period applications

These two parts are built in parallel and are very easy to confuse; the distinction lies in the regulation.

Part Ten is the MDR side. Article 45(1) of the Manual states that Regulation (EU) 2023/607 entered into force on 20 March 2023, upon its publication in the Official Journal of the European Union. Article 46 regulates the procedure for the application to be made in EBS in this scope, and Article 47 the procedure for the application to be made in ÜTS.

Part Eleven is the IVDR side. Article 48(1) of the Manual states that Regulation (EU) 2024/1860 entered into force upon its publication on 09.07.2024. Article 49 regulates the procedure for the IVDR transition period application to be made in EBS and Article 50 the one to be made in ÜTS.

The order matters: in both parts the EBS application comes first, then the ÜTS application. Article 47(2)(a) of the Manual states this explicitly and provides that if no application is made in EBS, or if the Agency does not allow an extension of the period, the related ÜTS application will be rejected.

Parts Twelve, Thirteen and Fourteen: the trio of class, procedure and document set

Read together, these three parts give the complete answer to the question "which document for which device".

Part Twelve is devoted to classification. Article 51 of the Manual covers the special definitions used in classification: paragraph 1 states that special definitions are used, and points (a), (b) and (c) of paragraph 2 set the thresholds for temporary, short-term and long-term use. Article 52 regulates the general rules: paragraph 1 states that classification is based on the intended purpose of the devices, and paragraph 5 states that if several rules apply to the same device, the strictest rule, giving the highest classification, is applied. Article 53 regulates the classification of devices under the MDD, Article 54 under the AIMDD, Article 55 under the IVDD, Article 56 under the MDR and Article 57 under the IVDR.

Part Thirteen is devoted to conformity assessment procedures: Article 58 of the Manual shows the procedures under the MDD, Article 59 under the AIMDD, Article 60 under the IVDD, Article 61 under the MDR and Article 62 under the IVDR.

Part Fourteen then ties the result to ÜTS: Article 63 of the Manual regulates the ÜTS document business rules under the MDD, Article 64 under the AIMDD, Article 65 under the IVDD, Article 66 under the MDR and Article 67 under the IVDR. Which documents can be selected on the device registration screen follows from these articles; Article 27(5)(a) of the Manual also refers to the business rules in Article 66 for document selection.

Part Fifteen and the annexes

The last part of the Manual consists of three articles: Article 68 regulates the repealed manual, Article 69 the entry into force and Article 70 the execution. Article 70(1) of the Manual states that the provisions of the Manual shall be executed by the President of the Turkish Medicines and Medical Devices Agency (Türkiye İlaç ve Tıbbi Cihaz Kurumu).

After the parts come the annexes. The table of contents lists one hundred annexes, from Annex-1 to Annex-100, plus a revision history page. The annexes are not independent of the article text; they are called from within the articles. For example, Article 5(3) of the Manual refers to Annex-1 for the sample petition to be used in an ordinary partnership application, Article 13(1) to Annex-10 for the sample of the relevant document, and Article 9(2)(a) to Annex-21 for the sample undertaking letter. Do not download and use an annex on its own; look at which article calls it.

Which article to open for which question

When searching the Manual, it is faster to work from the question than from a keyword.

  • How does my firm register in ÜTS: Article 5 of the Manual. Under which type is this document notified in ÜTS: Articles 6 to 24. Which application type should I choose for this document: Article 39, paragraphs 4 to 8. What does this field on the registration screen ask for: Article 25 or 26 if the device is under an old regulation, Article 27, 28 or 29 if under the MDR, Article 30 if under the IVDR. How do I do the same transaction for hundreds of products: Articles 31 to 38. Why did my application stay in "Awaiting Signature": Article 39, paragraphs 12 and 13, and Article 40(5)(g). How do I object to a negative decision: Article 39, paragraphs 16 and 17, and Article 40(9). How do I obtain a certificate for export: Articles 41 and 42. The same barcode is registered differently at another firm: Articles 43 and 44.


Which class is my device: Articles 51, 52 and, depending on the regulation, Articles 53 to 57.


Which documents are mandatory for this class: Articles 63 to 67.

What we do when working with the Manual, and what we cannot do

Within medical device ÜTS registration consultancy, our concrete output on the Manual side is this:

  • Version check: We check the document number, first publication date and revision number of your copy of the Manual from the footer block, and determine whether you are relying on a text that has been repealed under Article 68(1) of the Manual.

  • Effective date distinction: We list the postponed provisions under Article 69(1)(a) of the Manual separately from the provisions that are applicable today.

  • Article mapping: We tie your question to the relevant article and paragraph instead of guessing, and we provide the text of the provision in writing together with the place where it appears.

  • Following internal references: By tracing the references the Manual makes from one article to another (for example, from Article 27(5) to Article 66, and from Article 34 to Articles 25 to 30), we identify the step that has been left out.

  • Annex mapping: We determine which annex is to be used in an application through the article that calls that annex.

What we cannot do is just as clear. We cannot interpret the Manual to produce a permission that is not written there; if a subject is not regulated in the Manual, we tell you it is not regulated. We cannot have the postponed provisions of the Manual applied early; Article 69(1)(a) ties their entry into force to the ÜTS Version Update. Nor can we commit to how the Agency will apply an article; Article 39(14) of the Manual leaves the evaluation to the Agency review expert.

In short, this is how we work: the firm assigns us a user authorization from its own ÜTS firm page, we prepare the registrations and application packages with the "Medical Device Registration Operator" ("Tıbbi Cihaz Kayıt Elemanı") authorization, and the person who electronically signs the application remains the firm's signatory.

Tıbbi Cihaz ÜTS Kayıt Danışmanlığı

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara