top of page

Medical Device Import: Communiqué No. 2026/16, TAREKS Inspection and ÜTS Registration

11 hours ago
10 min read
Tıbbi cihaz ithalatı 2026/16 tebliği TAREKS ve ÜTS
  • SUMMARY

    Medical device imports have been inspected through TAREKS since 1 January 2026 under the Ministry of Trade's Communiqué on Import Inspection of Medical Devices (Product Safety and Inspection: 2026/16). The ÜTS registration of the device and the importing company, on the other hand, is subject to TİTCK's rules.

    This article is a general framework. We give the provisions of the Communiqué, TİTCK ÜTS Registration Guideline TCKKD-KLVZ-03 and the Medical Device Regulation through literal quotations (unofficial translations). For notes by country, see our pages on importing medical devices from China and importing medical devices from Germany.

    For the ÜTS registrations of your imported medical devices: Medical Device ÜTS Registration Consultancy

    Contents

    1. Medical Device Import and the Scope of Communiqué No. 2026/162. Company Definition in TAREKS3. TAREKS Application and Documents to Be Uploaded4. Risk Analysis and Physical Inspection5. TAREKS Reference Number6. Exemptions and Exceptions7. Transitional Provision and the Former Communiqué No. 2025/168. Difference from Communiqué No. 2026/209. The Place of ÜTS Registration in Import10. Obligations of the Importer11. Frequently Asked Questions

    1. Medical Device Import and the Scope of Communiqué No. 2026/16

    “ARTICLE 1- (1) The purpose of this Communiqué is to regulate the procedures and principles for inspecting, at import, the conformity of the products in Annex-1 with the Medical Device Regulation published in the Official Gazette dated 2/6/2021 and numbered 31499 (repeated) and the In Vitro Diagnostic Medical Device Regulation published in the Official Gazette dated 2/6/2021 and numbered 31499 (repeated).”

    “(2) This Communiqué covers products to be subjected to the Free Circulation Regime and the Temporary Import Regime.”

    “(3) This Communiqué does not cover goods that are exported under the Outward Processing Regime and returned.”

    The products subject to inspection are listed by GTİP number in the Annex-1 list of the Communiqué. Even if a product's GTİP is in Annex-1, if it does not fall within the scope of the Medical Device Regulation or the IVD Regulation, the Communiqué defines it as an out-of-scope product:

    “h) Out of scope: A product that is included in Annex-1 as a GTİP but does not fall within the scope of the regulations specified in Article 1 or whose inspection is not targeted by the Ministry within the scope of this Communiqué,”

    “ARTICLE 7-(1) The out-of-scope declaration for the import lot subject to the application is made by the importing company to the inspection unit during the TAREKS application process.”

    For the GTİP field of the device in ÜTS, see our article on the GTİP code in ÜTS registration.

    2. Company Definition in TAREKS

    “ARTICLE 4- (1) All transactions related to the import inspection of medical devices are carried out through TAREKS and according to risk analysis.”

    According to the second paragraph of Article 4 of the Communiqué, the importing company must be defined in TAREKS within the framework of the Communiqué on the Risk-Based Control System in Foreign Trade (Product Safety and Inspection: 2025/28), and at least one company user authorized to act on behalf of the company must be present. The 2025/28 Communiqué regulates how the definition is made as follows:

    “(2) The company definition transaction is made only by the company representative.”

    “(3) The company representative completes the login transactions and the TAREKS undertaking signing transactions through the "Company Definition (TAREKS)" screen in the E-Signature Applications section on the Ministry's website, and carries out the company definition transaction.”

    “(3) The company user must have a qualified electronic certificate, mobile electronic signature or e-Devlet password in order to carry out transactions through TAREKS.”

    TAREKS and ÜTS are separate systems. TAREKS is the system of the Ministry of Trade and ÜTS is the system of TİTCK; a definition in one does not replace the other.

    3. TAREKS Application and Documents to Be Uploaded

    “ARTICLE 5- (1) The inspections within the scope of this Communiqué are carried out before the registration of the customs declaration within the framework of the fourth paragraph of Article 181 of the Customs Regulation.”

    “(2) The company user makes the application through TAREKS by using the "Risk-Based Control System in Foreign Trade (TAREKS) Application" section in the "E-transactions" part of the Ministry's website or the e-Devlet gateway, and uploads the information on the import lot and the documents specified in the first and second items of Annex-2.”

    The Annex-2 list of the Communiqué is titled "DOCUMENTS TO BE UPLOADED TO TAREKS":

    “1. One or more of the following customs documents appropriate to the condition of the goods (*)”

    “2. Invoice or proforma invoice (*)”

    “3. EU Declaration of Conformity (together with the approved copy of its Turkish translation where it is issued in other languages) (*)”

    “4. Turkish label and instructions for use”

    “5. Product images of the product to be imported, taken at the customs area”

    The customs documents in the first item are documents such as the summary declaration, TIR carnet, transit accompanying document or transport document (bill of lading, CMR, CIM), free zone transaction form, pre-status document, and customs declaration relating to the previous regime. The third item also lists, if there is a notified body in the product's conformity assessment, the EU certificate or certificates issued by it, together with their approved Turkish translation.

    “* If requested by the relevant inspection unit, it is mandatory to present the originals or approved copies of the documents”

    The ÜTS registration document is not in the Annex-2 list. At the application, the documents in the first and second items of Annex-2 are uploaded; the documents in the third, fourth and fifth items are requested for products directed to physical inspection (Article 9).

    4. Risk Analysis and Physical Inspection

    “(4) The TAREKS reference number stating that products not directed to physical inspection as a result of the risk analysis can be imported is created directly.”

    The Communiqué defines physical inspection as follows:

    “d) Physical inspection: One or more of document check, marking check, physical examination and laboratory test,”

    “ARTICLE 9- (1) For products directed to physical inspection, the documents specified in the third, fourth and fifth items of Annex-2 are uploaded electronically to TAREKS within twenty working days including the application day, and additional time is given by the system if requested in TAREKS. If the relevant documents are not uploaded to the system within the time limit, the application results negatively.”

    “(4) If a violation of the relevant legislation is detected or the additional information and documents requested are not uploaded to TAREKS within the time limit, the physical inspection is concluded negatively.”

    According to the fifth paragraph of Article 9, if it is determined that the EU declaration of conformity, test report or other documents requested by the inspection unit that were uploaded to TAREKS were not issued by the relevant party, the physical inspection is concluded negatively even if the other conditions are suitable. If a violation of the legislation is detected, the situation is also notified to the relevant customs administration in writing and through the system (Article 10).

    5. TAREKS Reference Number

    “ARTICLE 11- (1) It is mandatory for the importing company to record the TAREKS reference number stating that the product can be imported in box 44 of the customs declaration.”

    “(2) The TAREKS reference number is valid for 1 year from the date it is given.”

    The reference number does not show that the product is compliant:

    “(2) Permission to import the product or the creation of a TAREKS reference number for the product does not mean that the product is compliant with the legislation and/or safe.”

    6. Exemptions and Exceptions

    “ARTICLE 6- (1) For products declared in TAREKS by the company user as having an A.TR Movement Certificate, the TAREKS reference number stating that the product can be imported is created directly.”

    “(4) In the evaluation to be made according to risk analysis, products within the scope of the first paragraph may also be directed to physical inspection.”

    No TAREKS application is made for goods returned for the reasons in subparagraphs (a), (b) and (c) of the first paragraph of Article 446 of the Customs Regulation and for the goods specified in the fifth part of the Decision on the Implementation of Certain Articles of Customs Law No. 4458. In these cases, the 23-digit fixed reference numbers determined in Article 11 of the Communiqué are written in box 44 of the customs declaration.

    The importing company registration, authorized representative certificate and product registration are carried out under Medical Device ÜTS Registration Consultancy.

    7. Transitional Provision and the Former Communiqué No. 2025/16

    “ARTICLE 15-(1) The Communiqué on Import Inspection of Medical Devices (Product Safety and Inspection: 2025/16) published in the Official Gazette dated 31/12/2024 and numbered 32769 (4th repeated) has been repealed.”

    “TEMPORARY ARTICLE -1(1) The import of products for which a transport document has been issued in the country of departure before 1/1/2026 to be shipped to Türkiye for export purposes or which have been submitted to customs administrations in accordance with Customs Legislation is concluded, until 28/2/2026 (including this date), upon the realization of the TAREKS application and at the request of the importing company, in accordance with the provisions of the Communiqué on Import Inspection of Medical Devices (Product Safety and Inspection: 2025/16) repealed by Article 15.”

    “ARTICLE 16- (1) This Communiqué enters into force on 1/1/2026.”

    8. Difference from Communiqué No. 2026/20

    The Communiqué on Import Inspection of Certain Products Inspected by the Ministry of Health (Product Safety and Inspection: 2026/20) is a separate regulation. In this Communiqué, conformity is documented by the Control Certificate issued by the Ministry of Health:

    “ARTICLE 4- (1) If the products in Annex-1/A, Annex-1/B, Annex-1/C and Annex-2 are imported to be used for the purposes specified opposite them, their conformity in terms of human health and safety is documented with a Control Certificate on the basis of the documents submitted to the Ministry of Health.”

    In the Annex-1/A list of Communiqué No. 2026/20, the expression "(excluding products within the scope of the Medical Device Regulation)" appears in the purpose-of-use column of many lines. The import inspection of conformity with the Medical Device Regulation and the IVD Regulation is regulated by Communiqué No. 2026/16.

    9. The Place of ÜTS Registration in Import

    For a company that will import and sell a medical device, three bases stand out in ÜTS: the registration of the company, the registration of the device and the sale condition.

    Company registration: According to Article 5 of TİTCK ÜTS Registration Guideline TCKKD-KLVZ-03:

    “In other words, companies that will register as “Manufacturer/Importer/Dealer/Exporter” type companies in ÜTS must hold a medical device sales center license, and the ÇKYS number information must be entered as mandatory during company registration.”

    For the sales center authorization certificate, see our article on the requirement of a sales center authorization certificate for manufacturers and importers.

    Device registration: In device registration under the MDR there is an "Import/Manufacturing Information" heading (Article 27):

    “2) If the manufacturer (legal manufacturer) that issues the declaration of conformity to which the device is linked is established in Türkiye, this field is selected as "Manufactured". If the manufacturer (legal manufacturer) that issues the declaration of conformity to which the device is linked is not located in Türkiye (if it is a foreign manufacturer), this field is selected as "Imported".”

    “4) If this field is selected as "Imported", it is mandatory to fill in the "Country Imported From" and "GTİP Number" fields that appear on the ÜTS registration screen and are mentioned in subparagraphs (c) and (ç) of this paragraph.”

    In addition, the country where the device is physically manufactured is selected in the "Country of Origin" field. The details of imported device registration are on our imported medical device ÜTS registration page. If other companies have also registered a device with the same barcode, an imported product data change request is made for the differences between the registrations.

    Import notification: According to Article 7 of the ÜTS Individual Movement Notifications Guideline:

    “(4) The importer or the dealer authorized for import notification can make an import notification only for medical devices that are registered in ÜTS or that meet the conditions announced by the Agency within the transitional provisions of the Medical Device Regulation.”

    Sale condition: According to Article 26 of the Regulation on Medical Device Sales, Advertising and Promotion:

    “(1) Devices cannot be sold by real or legal persons who have not been authorized in accordance with the provisions of this Regulation.”

    “(2) Sales centers cannot sell devices that are not registered in the Agency's registration and information management system.”

    10. Obligations of the Importer

    Article 13 of the Medical Device Regulation lists the general obligations of importers:

    “ARTICLE 13 - (1) Importers place on the market only devices that comply with this Regulation.”

    According to subparagraph (a) of the second paragraph, the importer verifies the following in order to place a device on the market:

    “1) That the device bears the CE marking and that the EU declaration of conformity has been drawn up,”

    “2) That the manufacturer is identified and that an authorized representative has been appointed by the manufacturer in accordance with Article 11,”

    “3) That the device is labelled in accordance with this Regulation and the required instructions for use accompany the device,”

    “4) Where appropriate, that a UDI has been assigned by the manufacturer in accordance with Article 27,”

    “(3) Importers indicate their name, registered trade name or registered trade mark, the registered place of business at which they can be contacted and their address on the device or on its packaging or in a document accompanying the device.”

    Communiqué No. 2026/16 also emphasizes the responsibility of the importer separately:

    “ARTICLE 12-(1) The importer, whether inspected within the scope of this Communiqué or not, is in any case responsible under Law No. 7223 for the products it imports being compliant and safe with all relevant legislation, including the regulations specified in Article 1, and for the accuracy of the documents accompanying the products.”

    For details, see our article on the obligations of importers and distributors.

    For the steps of company, document and product registration of imported devices, see our ÜTS registration guide; for having the registrations carried out on your behalf, see our ÜTS consultancy page.

    11. Frequently Asked Questions

    Under which communiqué is the import inspection of medical devices carried out?

    As of 1 January 2026, the Communiqué on Import Inspection of Medical Devices (Product Safety and Inspection: 2026/16) applies. The former Communiqué No. 2025/16 has been repealed.

    Is TAREKS inspection carried out before the customs declaration?

    Yes. According to Article 5 of the Communiqué, inspections are carried out before the registration of the customs declaration.

    Within what period are documents uploaded in physical inspection?

    The documents in the third, fourth and fifth items of Annex-2 are uploaded to TAREKS within twenty working days including the application day. If they are not uploaded within the time limit, the application results negatively.

    How long is the TAREKS reference number valid?

    It is valid for 1 year from the date it is given and is written by the importer in box 44 of the customs declaration.

    Can an import notification be made for a device that is not registered in ÜTS?

    According to the Individual Movement Notifications Guideline, an import notification is made only for devices that are registered in ÜTS or that meet the conditions announced by the Agency within the transitional provisions.

    For the ÜTS company, document and product registrations of your imported devices: Medical Device ÜTS Registration Consultancy

    Sources

    • Resmî Gazete: Communiqué on Import Inspection of Medical Devices (2026/16) and Communiqué No. 2026/20

    • Ministry of Trade: Communiqué on the Risk-Based Control System in Foreign Trade (2025/28)

    • TİTCK: ÜTS Registration Guideline TCKKD-KLVZ-03 and ÜTS Individual Movement Notifications Guideline

    • Mevzuat Bilgi Sistemi: Medical Device Regulation and Regulation on Medical Device Sales, Advertising and Promotion

 
 

Medical Device ÜTS Registration Consultancy

Request an ÜTS registration consultancy quote

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara