top of page
< Back

Exporting Medical Devices to Belgium: ÜTS, EUDAMED, CE and Label Language

The most noticeable difference for a manufacturer established in Türkiye exporting medical devices to Belgium is language: for a device going to a patient or lay user, the label and instructions for use are prepared in three languages: French, Dutch and German. This page explains the three-language rule with the Commission table, the authorised representative question with MDCG 2022-16, and the EUDAMED and ÜTS steps with legislation quotes.

No mandataire / gemachtigde Is Needed for Belgium

In Belgium, the authorised representative appears as mandataire in French documents and gemachtigde in Dutch documents. Distributors based in Brussels often ask Turkish manufacturers for this document. No authorised representative is appointed for a manufacturer established in Türkiye; the basis is MDCG 2022-16.

"'Union market' refers to the territories of the Member States of the European Union and, owing to the European Economic Area (EEA), is extended to Norway, Liechtenstein and Iceland, and through the Customs Union Agreement to Türkiye."

Source: MDCG 2022-16 (Guidance on Authorised Representatives, Turkish translation), footnote 1.

The guidance's definition of an authorised representative:

"Authorised representative: any natural or legal person established within the Union who has received and accepted a written mandate from a manufacturer, located outside the Union, to act on the manufacturer's behalf in relation to specified tasks with regard to the latter's obligations under this Regulation"

Source: MDCG 2022-16 (TİTCK Turkish translation), Definitions.

The Medical Device Regulation sets the same boundary, counting Türkiye and the EU together.

"Where the manufacturer is not established in Türkiye or an EU member state, the device may be placed on the market only on the condition that the manufacturer appoints an authorised representative."

Source: Medical Device Regulation (Official Gazette 31499), Article 11/1.

Explanation to give the Belgian buyer: the manufacturer is established in Türkiye, is directly the manufacturer on the Union market under the Customs Union, is registered in EUDAMED as a manufacturer, and therefore the authorised representative field is empty. Authorised representation is a need of manufacturers established outside Türkiye and the EU.

 

Label and Instructions for Use Language: French, Dutch and German

"Manufacturers shall ensure that the device is accompanied by the information set out in Section 23 of Annex I in an official Union language(s) determined by the Member State in which the device is made available to the user or patient. The particulars on the label shall be indelible, easily legible and clearly comprehensible to the intended user or patient."

Source: (EU) 2017/745 MDR, Article 10, paragraph eleven.

The Commission language table shows the Belgian medical devices law (Wet betreffende medische hulpmiddelen) and gives this breakdown: label and instructions for use for patients or lay users in French, Dutch and German (Article 9, paragraph 1); for devices for professional users, French, Dutch, German or English (Article 9, paragraph 1); the implant card in French, Dutch, German or English at the patient's choice (Article 13, paragraph 3); the declaration of conformity in French, Dutch, German or English (Article 14); the field safety notice in French, Dutch and German, with English accepted if the user is a healthcare professional (Article 65); conformity assessment documents in French, Dutch, German or English (Article 24). The software interface is subject to the same rule as the label and IFU.

A manufacturer in Türkiye has three options: enter the professional channel with an English-only IFU, prepare a three-language label and IFU for the consumer channel, or use a single Benelux label by adding German to the French and Dutch content already prepared for France and the Netherlands. If space on a three-language label is limited, the e-IFU option can be considered only for devices intended for professional use. For the Turkish side's rule, see the article on Turkish labels and instructions for use.

 

FAMHP (AFMPS / FAGG)

Belgium's competent authority is the Federal Agency for Medicines and Health Products (FAMHP; AFMPS in French, FAGG in Dutch), Brussels. It is listed as the single authority for the MDR and IVDR in the Commission's May 2026 national authority list. Because the official FAMHP site was temporarily offline for security reasons at the time this article was prepared, the rules on national distributor or exporter registration in Belgium could not be verified; they are therefore not written here. Confirm directly with the authority whether your Belgian distributor has a registration obligation with FAMHP once the FAMHP site is accessible again.

The MDR gives Member States the power to set national rules on this.

"Member States may maintain or introduce national provisions on registration of distributors of devices which have been made available on their territory."

Source: (EU) 2017/745 MDR, Article 30, paragraph two.

 

EUDAMED Registration for the Belgian Market

For sales to Belgium, the manufacturer's SRN and the device's Basic UDI-DI registration are what count; FAMHP's national system does not replace the manufacturer's EUDAMED registration.

"Before placing a device, other than a custom-made device, on the market, manufacturers, authorised representatives and importers shall, in order to register, submit to the electronic system referred to in Article 30 the information referred to in Section 1 of Part A of Annex VI, provided that they have not already registered in accordance with this Article."

Source: (EU) 2017/745 Medical Device Regulation (MDR), Article 31(1).

"After having verified the data entered pursuant to paragraph 1, the competent authority shall obtain a single registration number (‘SRN’) from the electronic system referred to in Article 30 and issue it to the manufacturer, the authorised representative or the importer."

Source: (EU) 2017/745 Regulation (MDR), Article 31(2).

"Before placing a device on the market, other than a custom-made device, the manufacturer shall enter or if, already provided, verify in Eudamed the information referred to in Section 2 of Part A of Annex VI, with the exception of Section 2.2 thereof, and shall thereafter keep the information updated."

Source: (EU) 2017/745 Regulation (MDR), Article 29(4).

The timetable provision added to MDR Article 123:

"no later than 12 months from the date of publication of the notice referred to in Article 34(3) in respect of the electronic system referred to in Article 33(2), points (a) and (b), manufacturers shall ensure that the information to be entered in Eudamed in accordance with Article 29 is entered in that electronic system, including regarding the following devices, provided that those devices are also placed on the market from 6 months from the date of publication of that notice:"

Source: MDR 123(3)(e), as amended by (EU) 2024/1860 (Article 1(3)(b)).

According to the Commission's EUDAMED page, Decision (EU) 2025/2371 was published on 27 November 2025, and the actor registration, UDI/device registration, notified bodies and certificates, and market surveillance modules have been mandatory since 28 May 2026; the 12-month period for device data ends at the end of November 2026. The steps are in the articles on EUDAMED actor registration, device registration and legacy device registration; the service page is EUDAMED registration consultancy.

 

ÜTS: Export Notification and Free Sale Certificate

For products going to Belgium, the ÜTS export notification is the last movement notification closing individual tracking in Türkiye.

"An 'Export Notification' is made for individually tracked products exported by the company."

Source: Guide on Individual Movement Notifications of the Product Tracking System for Medical Devices (TİTCK), Article 17, paragraph one.

"When making an Export Notification in ÜTS, after querying with the product number, lot and/or serial number, entering data in the Customs Declaration number and Quantity fields is mandatory."

Source: Guide on Individual Movement Notifications of the Product Tracking System for Medical Devices (TİTCK), Article 17, paragraph two.

"If an Export Notification was made incorrectly, it is cancelled with an 'Export Cancellation Notification'."

Source: ÜTS Individual Movement Notifications Guide, Article 17, paragraph three.

For lots going to the port of Antwerp by container, the declaration number and quantity are matched with the customs declaration, not the bill of lading. The notification method is on the ÜTS individual notification procedures page; the general rules are in the articles on ÜTS individual movement notifications and exports, and free zone and bonded warehouse ÜTS registration.

A free sale certificate is not a precondition for Belgium; if requested, it is obtained from ÜTS.

"The free sale certificate application is made from the 'Free Sale Certificate Application Procedures' section under the 'Medical Device' tab in ÜTS."

Source: ÜTS Registration Guide (TCKKD-KLVZ-03, 13.05.2026), Article 42, paragraph two, item (a).

The registration route is in the free sale certificate article. Neighbouring markets with the same language family: France, the Netherlands, Germany.

 

Belgium Summary Table

 

TopicStatusCompetent authorityFAMHP / AFMPS / FAGG (Federal Agency for Medicines and Health Products), BrusselsLabel / IFU languagePatients and lay users: French, Dutch and German; professional users: French, Dutch, German or English (medical devices law Article 9/1)National additional registration / notificationFAMHP site temporarily offline; the national distributor registration rule could not be verified, to be confirmed with FAMHP. Manufacturer registration is in EUDAMEDIs an AR requiredNo (manufacturer established in Türkiye, Customs Union; MDCG 2022-16 footnote 1)

 

 

Medical Device ÜTS Registration Consultancy for exports to Belgium

We carry out the ÜTS product registration, export notifications and EUDAMED actor and device registration of manufacturers exporting to Belgium; we check that the three-language label and IFU set matches the EUDAMED and ÜTS data. To get started, request a quote or call +90 505 580 46 22; email: info@medexmedikal.com.

Frequently Asked Questions

Are three languages really mandatory for a consumer device going to Belgium?

According to the Commission language table, the Belgian medical devices law, Article 9, paragraph 1, requires the label and instructions for use of devices for patients or lay users in French, Dutch and German. For devices for professional users, one of these languages or English is sufficient.

A Belgian distributor asks for a mandataire contract; what should I do?

A manufacturer established in Türkiye does not appoint an authorised representative. Footnote 1 of MDCG 2022-16 states that the Union market covers Türkiye through the Customs Union; Article 11(1) of the Medical Device Regulation ties the condition only to manufacturers established outside Türkiye or the EU. Show your EUDAMED manufacturer registration.

Do I need to register nationally in Belgium?

Because the official FAMHP site was offline at the time this article was written, the national distributor registration rule could not be verified. MDR Article 30(2) only gives Member States the power to set national rules for distributor registration; your EUDAMED registration as the manufacturer is what matters. The Belgian distributor should confirm its own obligation with FAMHP.

In which language is a field safety notice sent?

According to the Commission table, a field safety notice in Belgium is prepared in French, Dutch and German; English is accepted if the user is a healthcare professional (law Article 65).

How is the ÜTS notification made for a container going to Antwerp?

Under Article 17 of the Individual Movement Notifications Guide, the query is made by product number and lot/serial, and the customs declaration number and quantity are entered. A notification cannot be made before the declaration is closed; in case of an error, the Export Cancellation Notification is used.

Ehlibeyt Mahallesi, Tekstilciler Caddesi No: 35/7 06520 Çankaya / Ankara - TÜRKİYE

Cevizli Mahallesi, Zuhal Caddesi Ritim İstanbul B Blok, No:44 Maltepe / İstanbul - TÜRKİYE

info@medexmedikal.com
+90 505 580 4622
+90 312 389 1354

ÜTS Guides · Legislation Calendar · Glossary · ÜTS Guide Index · Frequently Asked Questions

Services: ÜTS Consultancy · Who Carries Out the ÜTS Registration? · ÜTS Document Registration Consultancy · ÜTS Product Registration Consultancy · Importer ÜTS Registration Consultancy · Sales Centre Authorisation Certificate · EUDAMED Registration Consultancy · MDR/IVDR Declaration of Conformity · Technical File Preliminary Review · Label and Instructions for Use Check · PRRC Service · PMS and PSUR · Clinical Evaluation · EMDN and GMDN Code Determination · Certificate of Free Sale · EUDAMED XML Generator · ÜTS Registration Training · Correction of a Rejected ÜTS Application

KVKK and Privacy Policy | Cookie Policy | Accessibility Statement

© 2026 Medex Kurumsal Danışmanlık Ltd. Şti.

bottom of page
WhatsApp Hemen Ara